[OpenSIPS-Users] I need some info while setiing sethostport on opensips config .

[Sasmita Panda]

Thank you Ben .

*Thanks & Regards*
*Sasmita Panda*
*Senior Network Testing and Software Engineer*
*3CLogic , ph:07827611765*


On Mon, Jul 29, 2024 at 6:39 PM Ben Newlin <Ben.Newlin at genesys.com> wrote:

> Unfortunately, I have not used the database provisioning method, so I
> don’t have much help there. I’ll have to defer to someone else. The only
> thing I could think is to make sure the IP address in the DB corresponds to
> the socket definition on the box, but it seems like you’ve already done
> that.
>
>
>
> Whether or not you need to Record-Route the protocol change depends on
> your local implementation. If you have dedicated or known routing channels
> for sequential requests – which includes ACK & BYE, not just Re-INVITE –
> then you may not need the routes to be in the SIP messaging. Otherwise, you
> probably do need the Record-Route.
>
>
>
> Ben Newlin
>
>
>
> *From: *Users <users-bounces at lists.opensips.org> on behalf of Sasmita
> Panda <spanda at 3clogic.com>
> *Date: *Monday, July 29, 2024 at 5:51 AM
> *To: *OpenSIPS users mailling list <users at lists.opensips.org>
> *Subject: *Re: [OpenSIPS-Users] I need some info while setiing
> sethostport on opensips config .
>
> * EXTERNAL EMAIL - Please use caution with links and attachments *
>
>
> ------------------------------
>
> Any suggestions on this ?
>
>
>
>
>
>
> *Thanks & Regards*
>
> *Sasmita Panda*
>
> *Senior Network Testing and Software Engineer*
>
> *3CLogic , ph:07827611765*
>
>
>
>
>
> On Fri, Jul 26, 2024 at 4:55 PM Sasmita Panda <spanda at 3clogic.com> wrote:
>
> Hi , Thanks for the reply .
>
> Rather than configuration change , I have done through  dynamic routing .
>
>
>
>  In the dr_gateway table I have added socket information
> *udp:x.x.x.x:5060*
>
> mysql> select * from dr_gateways;
>
> +----+------+------+---------------------------------------+-------+------------+-------+------------+-------+-----------------------+-------------+
> | id | gwid | type | address                               | strip |
> pri_prefix | attrs | probe_mode | state | socket                |
> description |
>
> +----+------+------+---------------------------------------+-------+------------+-------+------------+-------+-----------------------+-------------+
> |  1 | gw4  |    3 | fs.3c.com:6080 |     0 | NULL       | NULL  |
>    0 |     0 | udp:192.168.0.69:5060 | NULL        |
>
> +----+------+------+---------------------------------------+-------+------------+-------+------------+-------+-----------------------+-------------+
>
>
>
> I only have a single Invite on a single session on this leg . There is no
> Re-Invite at all  . Will I need to set record_route_preset on this case as
> well ?
>
>
> *Thanks & Regards*
>
> *Sasmita Panda*
>
> *Senior Network Testing and Software Engineer*
>
> *3CLogic , ph:07827611765*
>
>
>
>
>
> On Wed, Jul 24, 2024 at 7:06 PM Ben Newlin <Ben.Newlin at genesys.com> wrote:
>
> Sasmita,
>
>
>
> You need to be using $socket_out. [1]
>
>
>
> By default, OpenSIPS will use the receiving socket as the sending socket.
> This means if you receive the message on TLS and do not change $socket_out
> then the message will be sent out the TLS socket.
>
>
>
> Additionally, unless you are using B2BUA or maybe topology_hiding you will
> likely need to “remember” this protocol transition by adding a double
> Record-Route [2] to the message. You may also need to change any
> “transport” params that exist in the Request-URI and possibly the Contact
> header.
>
>
>
> [1] https://www.opensips.org/Documentation/Script-CoreVar-3-2#toc86
>
> [2] https://opensips.org/docs/modules/3.2.x/rr.html
>
>
>
> Ben Newlin
>
>
>
> *From: *Users <users-bounces at lists.opensips.org> on behalf of Sasmita
> Panda <spanda at 3clogic.com>
> *Date: *Wednesday, July 24, 2024 at 1:54 AM
> *To: *OpenSIPS users mailling list <users at lists.opensips.org>
> *Subject: *[OpenSIPS-Users] I need some info while setiing sethostport on
> opensips config .
>
> * EXTERNAL EMAIL - Please use caution with links and attachments *
>
>
> ------------------------------
>
> Hi All ,
>
>
>
> I am using openisp version : 3.2
>
>
>
> I have an opensips config on which I was listening on UDP port only and
> hence using sethostport to route calls to a particular destination . like
> below .
>
>
>
>           if(is_from_gw() || ($rp=~"5505"))
>                    {
>                   sethostport("freeswitch-test.xyz.com:6080");
>                    route(inbound);
>                     exit;
>                    }
>
>
>
> Now I have to accept a call on TLS and send that to some other destination
> on UDP . I have enabled the tls module and also the dependent modules like
> tls_openssl,  tls_mgm .
>
>
>
> socket=udp:192.168.0.y:5060
> socket=tls:192.168.0.y:5061
> socket=tcp:192.168.0.y:5060
>
>           if(is_from_gw() || ($rp=~"5505"))
>                    {
>                   sethostport("freeswitch-test.xyz.com:6080");
>                    route(inbound);
>                     exit;
>                    }
>
>
>
> This above configuration is not working . I am getting "477 Send Failed "
>
>
>
> *Thanks & Regards*
>
> *Sasmita Panda*
>
> *Senior Network Testing and Software Engineer*
>
> *3CLogic , ph:07827611765*
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20240729/3834e515/attachment-0001.html>