[OpenSIPS-Users] 2.2.x and CP with json

[Jeff Wilkie]

Thanks Bogdan,  I will dl 2.2.3 and retest.  This error occurred on the
following BTW

Array
(
    [Server] => OpenSIPS (2.3.0-dev (x86_64/linux))
)


Jeff Wilkie

On Fri, Feb 24, 2017 at 4:46 AM, Bogdan-Andrei Iancu <bogdan at opensips.org>
wrote:

> Hi Jeff,
>
> There was an issue on how the MI output of the address_dump was formated
> when using JSON. This issue was leading to an invalid JSON being returned.
> And CP was dropping the returned JSON as not able being able to parse it.
> If you do the direct web query, there is nothing to parse/validate the
> JSON, so it is displayed.
>
> The issue was fixed in latest 2.2, so please grab the 2.2.3 and give it a
> try please.
>
> Best regards,
>
> Bogdan-Andrei Iancu
> OpenSIPS Founder and Developerhttp://www.opensips-solutions.com
>
> On 02/22/2017 08:24 PM, Jeff Wilkie wrote:
>
> Ok, question part 2, now that the proper module is loaded :)  From the MI
> interface in CP, I have 1 small issue.  Using json to interface with
> opensips, I execute the command "*address_dump" *and execute.  I receive
> the output of address dump   |  son:127.0.0.1:8888/json Successfully
> executed, no output generated.  Other commands like domain_dump work as
> expected in the SYSTEM/MI interface.  If I bypass CP and use web direct
> command 127.0.0.1:8888/json/address_dump I receive the proper output.
> Not sure why CP provides no output from this command though.
>
> The web query directly looks like this as a response when not using MI via
> CP
>
> http://10.10.20.229:8888/json/address_dump
>
> {"part": [{"value":"default", "children":{"dest": [{"value":"	   8 <10.10.10.99,2, 5060, 1, NULL, 1515599999>"}, {"value":"	  19 <10.10.20.193,2, 5060, 1, NULL, 1515599999>"}, {"value":"	  81 <192.168.1.203,1, 5060, 1, NULL, NULL>"}]}}]}
>
>
> It's not a show stopper but bugging me why it doesn't work for that
> command only from what I can tell from initial testing.
>
> Jeff Wilkie
>
>
>
>> Yes, you did overlook to load the dialplan module into your OpenSIPS (the
>> dp_reload command is prvided by this modules).
>>
>> Regards,
>>
>> Bogdan-Andrei Iancu
>> OpenSIPS Founder and Developerhttp://www.opensips-solutions.com
>>
>> On 02/22/2017 05:56 PM, Jeff Wilkie wrote:
>>
>> When using the mi_json module combined with CP, it appears that not all
>> of the functions were ported over for this interaction to complete 100%.
>> JSON enabled in opensips-cp/config/boxes.global.inc.php only allows some
>> commands to work.  One particular command that appears to not be working is
>> under SYSTEM/DIALPLAN of CP when you attempt to hit "apply to server".  I
>> receive a Sending to *json:127.0.0.1:8888/json
>> <http://127.0.0.1:8888/json>* : Error code 500 (Command not found) for
>> the dp_reload command.  If I do the same thing under the SYSTEM/PERMISSIONS
>> page "apply to server" returns success for address_reload.   Is this a
>> known issue?  Did I overlook something small in the config?  How do I
>> remedy this issue?
>> Thanks
>> Jeff Wilkie
>>
>> _______________________________________________
>> Users mailing listUsers at lists.opensips.orghttp://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20170224/307d9ea1/attachment.html>