[OpenSIPS-Users] Cross Compile OpenSIPS ARMv7
Caio
caiortp at gmail.com
Mon Oct 26 12:46:49 CET 2015
Ovidiu,
It work, I was passing a wrong arguments to the make.
Thank you very much
Regards,
Caio Pereira
2015-10-21 12:10 GMT-02:00 Ovidiu Sas <osas at voipembedded.com>:
> I was cross compiling opensips for several platforms and the fastlock
> was disabled by default (regular locks were used instead).
> It seems that you are not cross compiling.
> You will need to track down in the Makefile how your compiler is
> detected and what settings are applied.
>
> For your reference, here's the makefile that I used for cross compiling:
> http://svn.nslu2-linux.org/svnroot/optware/trunk/make/opensips.mk
>
> Regards,
> Ovidiu Sas
>
> On Wed, Oct 21, 2015 at 9:37 AM, Caio <caiortp at gmail.com> wrote:
> > It's possible to disable fastlock.h and futex_lock.h in the
> Makefile.conf?
> >
> > Thanks
> >
> > Regards,
> >
> > Caio Pereira
> >
> > 2015-10-20 18:49 GMT-02:00 Caio <caiortp at gmail.com>:
> >>
> >> Ovidiu,
> >>
> >> My Log
> >>
> >> echo $CC_EXTRA_OPTS
> >> -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon
> >> --sysroot=/home/caio/fsl-community-bsp/imx6/tmp/sysroots/imx6"
> >>
> >> CPU=armv7a
> >> LD=arm-poky-linux-gnueabi-ld
> >> --sysroot=/home/caio/fsl-community-bsp/imx6/tmp/sysroots/imx6
> >>
> >> CC=arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork
> >> -mfloat-abi=hard -mfpu=neon
> >> --sysroot=/home/caio/fsl-community-bsp/imx6/tmp/sysroots/imx6
> >>
> >>
> >> cat Makefile.conf
> >>
> >> #DEFS+= -DPKG_MALLOC #Uses a faster malloc (exclusive w/ USE_SHM_MEM)
> >> DEFS+= -DSHM_MMAP #Use mmap instead of SYSV shared memory
> >> DEFS+= -DUSE_MCAST #Compile in support for IP Multicast
> >> DEFS+= -DDISABLE_NAGLE #Disabled the TCP NAgle Algorithm ( lower delay )
> >> DEFS+= -DSTATISTICS #Enables the statistics manager
> >> DEFS+= -DHAVE_RESOLV_RES #Support for changing some of the resolver
> >> parameters
> >> #DEFS+= -DHP_MALLOC #High performance allocator with fine-grained
> locking
> >> #DEFS+= -DF_MALLOC #An even faster allocator. Not recommended for
> >> debugging
> >> #DEFS+= -DF_MALLOC_OPTIMIZATIONS #Remove all internal checks in F_MALLOC
> >> #DEFS+= -DDBG_QM_MALLOC #Allocator used for debugging information
> >> #DEFS+= -DUSE_SHM_MEM #All PKG allocations are mapped to SHM ( exclusive
> >> w/ PKG_MALLOC )
> >> #DEFS+= -DDBG_F_MALLOC #TODO ?
> >> #DEFS+= -DNO_DEBUG #Turns off all debug messages
> >> #DEFS+= -DNO_LOG #Completely turns off all the logging
> >> #DEFS+= -DVQ_MALLOC #TODO ?
> >> #DEFS+= -DFAST_LOCK #Uses fast architecture specific locking
> >> #DEFS+= -DUSE_FUTEX #Uses linux futexs with fast architecture specific
> >> locking
> >> DEFS+= -DUSE_SYSV_SEM #Uses SYSV sems for locking ( slower & limited
> >> number of locks
> >> #DEFS+= -DUSE_PTHREAD_MUTEX #Uses pthread mutexes
> >> #DEFS+= -DBUSY_WAIT #Uses busy waiting on the lock
> >> #DEFS+= -DDBG_LOCK #TODO ?
> >> DEFS+= -DNOSMP #Do not use SMP sompliant locking. Faster but won't work
> on
> >> SMP machines
> >> #DEFS+= -DEXTRA_DEBUG #Compiles in some extra debugging code
> >>
> >>
> >> make all
> >> Compiling blacklists.c
> >> In file included from blacklists.h:30:0,
> >> from blacklists.c:38:
> >> ip_addr.h: In function 'sockaddr2ip_addr':
> >> ip_addr.h:224:25: warning: cast increases required alignment of target
> >> type [-Wcast-align]
> >> memcpy(ip->u.addr, &((struct sockaddr_in*)sa)->sin_addr, 4);
> >> ^
> >> ip_addr.h:229:25: warning: cast increases required alignment of target
> >> type [-Wcast-align]
> >> memcpy(ip->u.addr, &((struct sockaddr_in6*)sa)->sin6_addr, 16);
> >> ^
> >> In file included from locking.h:66:0,
> >> from blacklists.h:32,
> >> from blacklists.c:38:
> >> lock_alloc.h: In function 'lock_set_alloc':
> >> lock_alloc.h:70:13: warning: cast increases required alignment of target
> >> type [-Wcast-align]
> >> ls->locks=(gen_lock_t*)((char*)ls+sizeof(gen_lock_set_t));
> >> ^
> >> {standard input}: Assembler messages:
> >> {standard input}:105: Error: bad instruction `btsl $0,[r6]'
> >> {standard input}:106: Error: bad instruction `adcl $0,r3'
> >> {standard input}:208: Error: bad instruction `movb $0,(r3)'
> >> {standard input}:305: Error: bad instruction `btsl $0,[r9]'
> >> {standard input}:306: Error: bad instruction `adcl $0,r3'
> >> {standard input}:390: Error: bad instruction `movb $0,(r3)'
> >> {standard input}:436: Error: bad instruction `btsl $0,[r10]'
> >> {standard input}:437: Error: bad instruction `adcl $0,r3'
> >> {standard input}:480: Error: bad instruction `movb $0,(r3)'
> >> {standard input}:526: Error: bad instruction `btsl $0,[r10]'
> >> {standard input}:527: Error: bad instruction `adcl $0,r3'
> >> {standard input}:555: Error: bad instruction `movb $0,(r2)'
> >> {standard input}:619: Error: bad instruction `btsl $0,[r10]'
> >> {standard input}:620: Error: bad instruction `adcl $0,r3'
> >> {standard input}:718: Error: bad instruction `movb $0,(r3)'
> >> {standard input}:3194: Error: bad instruction `btsl $0,[r7]'
> >> {standard input}:3195: Error: bad instruction `adcl $0,r6'
> >> {standard input}:3249: Error: bad instruction `movb $0,(r3)'
> >> {standard input}:3300: Error: bad instruction `btsl $0,[r7]'
> >> {standard input}:3301: Error: bad instruction `adcl $0,r3'
> >> {standard input}:3340: Error: bad instruction `movb $0,(r0)'
> >> {standard input}:3366: Error: bad instruction `btsl $0,[r6]'
> >> {standard input}:3367: Error: bad instruction `adcl $0,r3'
> >> {standard input}:3411: Error: bad instruction `movb $0,(r1)'
> >> {standard input}:3497: Error: bad instruction `btsl $0,[r6]'
> >> {standard input}:3498: Error: bad instruction `adcl $0,r3'
> >> {standard input}:3542: Error: bad instruction `movb $0,(r1)'
> >> {standard input}:3795: Error: bad instruction `btsl $0,[r6]'
> >> {standard input}:3796: Error: bad instruction `adcl $0,r3'
> >> {standard input}:3839: Error: bad instruction `movb $0,(r3)'
> >> {standard input}:3882: Error: bad instruction `btsl $0,[fp]'
> >> {standard input}:3883: Error: bad instruction `adcl $0,r3'
> >> {standard input}:3981: Error: bad instruction `movb $0,(r3)'
> >> {standard input}:4020: Error: bad instruction `btsl $0,[r6]'
> >> {standard input}:4021: Error: bad instruction `adcl $0,r3'
> >> {standard input}:4081: Error: bad instruction `movb $0,(r3)'
> >> {standard input}:4129: Error: bad instruction `btsl $0,[r10]'
> >> {standard input}:4130: Error: bad instruction `adcl $0,r3'
> >> {standard input}:4381: Error: bad instruction `movb $0,(r3)'
> >> {standard input}:4837: Error: bad instruction `btsl $0,[fp]'
> >> {standard input}:4838: Error: bad instruction `adcl $0,r3'
> >> {standard input}:4951: Error: bad instruction `movb $0,(r3)'
> >> {standard input}:5312: Error: bad instruction `btsl $0,[r6]'
> >> {standard input}:5313: Error: bad instruction `adcl $0,r9'
> >> {standard input}:5383: Error: bad instruction `btsl $0,[r8]'
> >> {standard input}:5384: Error: bad instruction `adcl $0,r5'
> >> {standard input}:5471: Error: bad instruction `movb $0,(r3)'
> >> {standard input}:5510: Error: bad instruction `btsl $0,[r6]'
> >> {standard input}:5511: Error: bad instruction `adcl $0,r3'
> >> {standard input}:5557: Error: bad instruction `movb $0,(r3)'
> >> {standard input}:5596: Error: bad instruction `btsl $0,[r9]'
> >> {standard input}:5597: Error: bad instruction `adcl $0,r3'
> >> {standard input}:5628: Error: bad instruction `movb $0,(r3)'
> >> {standard input}:5889: Error: bad instruction `movb $0,(r3)'
> >> {standard input}:5928: Error: bad instruction `btsl $0,[r8]'
> >> {standard input}:5929: Error: bad instruction `adcl $0,r3'
> >> {standard input}:5975: Error: bad instruction `movb $0,(r3)'
> >> {standard input}:6014: Error: bad instruction `btsl $0,[r9]'
> >> {standard input}:6015: Error: bad instruction `adcl $0,r3'
> >> {standard input}:6045: Error: bad instruction `movb $0,(r3)'
> >> {standard input}:6103: Error: bad instruction `btsl $0,[r10]'
> >> {standard input}:6104: Error: bad instruction `adcl $0,r3'
> >> {standard input}:6203: Error: bad instruction `movb $0,(r3)'
> >> {standard input}:6323: Error: bad instruction `btsl $0,[r6]'
> >> {standard input}:6324: Error: bad instruction `adcl $0,r3'
> >> {standard input}:6421: Error: bad instruction `movb $0,(r3)'
> >> {standard input}:6481: Error: bad instruction `btsl $0,[r9]'
> >> {standard input}:6482: Error: bad instruction `adcl $0,r3'
> >> {standard input}:6582: Error: bad instruction `movb $0,(r3)'
> >> {standard input}:7101: Error: bad instruction `btsl $0,[r1]'
> >> {standard input}:7102: Error: bad instruction `adcl $0,r3'
> >> {standard input}:7232: Error: bad instruction `movb $0,(r3)'
> >> {standard input}:7394: Error: bad instruction `btsl $0,[r2]'
> >> {standard input}:7395: Error: bad instruction `adcl $0,r1'
> >> {standard input}:7527: Error: bad instruction `movb $0,(r3)'
> >> {standard input}:7803: Error: bad instruction `btsl $0,[r6]'
> >> {standard input}:7804: Error: bad instruction `adcl $0,r3'
> >> {standard input}:7912: Error: bad instruction `movb $0,(r3)'
> >> {standard input}:8809: Error: bad instruction `btsl $0,[r4]'
> >> {standard input}:8810: Error: bad instruction `adcl $0,r3'
> >> {standard input}:8852: Error: bad instruction `movb $0,(r1)'
> >> {standard input}:8883: Error: bad instruction `btsl $0,[r5]'
> >> {standard input}:8884: Error: bad instruction `adcl $0,r3'
> >> {standard input}:8930: Error: bad instruction `movb $0,(r3)'
> >> {standard input}:8980: Error: bad instruction `btsl $0,[r10]'
> >> {standard input}:8981: Error: bad instruction `adcl $0,r3'
> >> {standard input}:9020: Error: bad instruction `movb $0,(r0)'
> >> make: *** [blacklists.o] Error 1
> >>
> >>
> >>
> >>
> >>
> >> Thank you.
> >>
> >> Best Regards,
> >>
> >> Caio Pereira
> >>
> >>
> >> 2015-10-20 18:28 GMT-02:00 Caio <caiortp at gmail.com>:
> >>>
> >>> Ovidiu Sas,
> >>>
> >>>
> >>> In the Makefile.defs there a code to get the ARCH
> >>>
> >>> 90 ARCH := $(shell $(GETARCH) |sed -e s/i.86/i386/ -e
> s/sun4u/sparc64/
> >>> \
> >>> 91 -e s/armv4l/arm/ -e "s/Power
> Macintosh/ppc/"
> >>> \
> >>> 92 -e s/sun4v/sparc64/ -e "s/cobalt/mips2/" \
> >>> 93 -e s/amd64/x86_64/ )
> >>>
> >>>
> >>> I tried export ARCH=armv7 but because of the code, the ARCH will be
> >>> always x86-64 (host machine) .
> >>>
> >>> I added the CFLAGS to the armv7 arch in the Makefile.defs
> >>>
> >>> 918 ifeq ($(ARCH), armv7)
> >>> 919 # if gcc
> >>> 920 ifeq ($(CC_NAME), gcc)
> >>> 921 #common stuff
> >>> 922 CFLAGS+=-O0 -mfloat-abi=hard
> >>> -march=armv7-a -mthumb-interwork -Wcast-align $(PROFILE) \
> >>> 923 -mfloat-abi=hard -mfpu=neon
> >>> -mtune=cortex-a9 -Wall
> >>> 924 endif
> >>> 925 endif
> >>>
> >>>
> >>> Which is the best way to pass the arch parameter to the Makefile?
> >>>
> >>> (sorry for the typo in the last email).
> >>>
> >>> Thank you very much.
> >>>
> >>> Best Regards,
> >>>
> >>> Caio Pereira
> >>>
> >>> 2015-10-20 17:17 GMT-02:00 Ovidiu Sas <osas at voipembedded.com>:
> >>>>
> >>>> The optimizations are done via the compiler flags: CFLAGS.
> >>>> You need to replace -09 with -00.
> >>>> You need to check if you are using a native compiler or a cross one
> >>>> and adjust the proper flags inside Makefile.defs.
> >>>>
> >>>> Regards,
> >>>> Ovidiu Sas
> >>>>
> >>>> On Tue, Oct 20, 2015 at 1:53 PM, Caio <caiortp at gmail.com> wrote:
> >>>> > Hello, Oividiu!
> >>>> >
> >>>> > Sorry for the delay, I was on vacation.
> >>>> >
> >>>> > I'm writing a recipe to Yocto.
> >>>> > This ARM cpu is new (armv7-a), but I see that is not compatible with
> >>>> > opensips's optimization.
> >>>> > I'm new with opensips, I have only tested in my host machine
> x86-64.
> >>>> >
> >>>> >
> >>>> > Do you know with parameters I need to comment in the Makefile.conf
> to
> >>>> > have a
> >>>> > basic compilation without any optimization in the opensips?
> >>>> >
> >>>> >
> >>>> > #DEFS+= -DPKG_MALLOC #Uses a faster malloc (exclusive w/
> USE_SHM_MEM)
> >>>> > #DEFS+= -DSHM_MMAP #Use mmap instead of SYSV shared memory
> >>>> > DEFS+= -DUSE_MCAST #Compile in support for IP Multicast
> >>>> > DEFS+= -DDISABLE_NAGLE #Disabled the TCP NAgle Algorithm ( lower
> delay
> >>>> > )
> >>>> > DEFS+= -DSTATISTICS #Enables the statistics manager
> >>>> > DEFS+= -DHAVE_RESOLV_RES #Support for changing some of the resolver
> >>>> > parameters
> >>>> > #DEFS+= -DHP_MALLOC #High performance allocator with fine-grained
> >>>> > locking
> >>>> > DEFS+= -DF_MALLOC #An even faster allocator. Not recommended for
> >>>> > debugging
> >>>> > #DEFS+= -DF_MALLOC_OPTIMIZATIONS #Remove all internal checks in
> >>>> > F_MALLOC
> >>>> > #DEFS+= -DDBG_QM_MALLOC #Allocator used for debugging information
> >>>> > #DEFS+= -DUSE_SHM_MEM #All PKG allocations are mapped to SHM (
> >>>> > exclusive w/
> >>>> > PKG_MALLOC )
> >>>> > #DEFS+= -DDBG_F_MALLOC #TODO ?
> >>>> > #DEFS+= -DNO_DEBUG #Turns off all debug messages
> >>>> > #DEFS+= -DNO_LOG #Completely turns off all the logging
> >>>> > #DEFS+= -DVQ_MALLOC #TODO ?
> >>>> > #DEFS+= -DFAST_LOCK #Uses fast architecture specific locking
> >>>> > #DEFS+= -DUSE_FUTEX #Uses linux futexs with fast architecture
> specific
> >>>> > locking
> >>>> > #DEFS+= -DUSE_SYSV_SEM #Uses SYSV sems for locking ( slower &
> limited
> >>>> > number
> >>>> > of locks
> >>>> > #DEFS+= -DUSE_PTHREAD_MUTEX #Uses pthread mutexes
> >>>> > #DEFS+= -DBUSY_WAIT #Uses busy waiting on the lock
> >>>> > #DEFS+= -DDBG_LOCK #TODO ?
> >>>> >
> >>>> >
> >>>> >
> >>>> > Thank you!
> >>>> >
> >>>> > Best Regards,
> >>>> >
> >>>> > Caio Pereira
> >>>> >
> >>>> >
> >>>> > 2015-09-23 21:48 GMT-03:00 Ovidiu Sas <osas at voipembedded.com>:
> >>>> >>
> >>>> >> Hello Caio,
> >>>> >>
> >>>> >> Have you managed to cross compile opensips?
> >>>> >> The optimizations do not work for older type of arm CPUs.
> >>>> >> Did you experienced any issues running opensips on arm?
> >>>> >>
> >>>> >> Regards,
> >>>> >> Ovidiu Sas
> >>>> >>
> >>>> >> On Thu, Sep 17, 2015 at 2:51 PM, Caio <caiortp at gmail.com> wrote:
> >>>> >> > Hello,
> >>>> >> >
> >>>> >> > I would like to cross compile the opensips to ARMv7 architecture
> >>>> >> > (Freescale
> >>>> >> > IMX6).
> >>>> >> > I saw that there's some optimization in assembly to lock
> functions.
> >>>> >> > There's some configuration in the Makeconfig.conf options that I
> >>>> >> > need
> >>>> >> > disable or enable to able the opensips run in my target
> >>>> >> > architecutre?
> >>>> >> >
> >>>> >> > Thank you very much.
> >>>> >> >
> >>>> >> > Best Regards
> >>>> >> >
> >>>> >> >
> >>>> >> >
> >>>> >> > --
> >>>> >> > ----------------------------------------------
> >>>> >> > Caio Pereira
> >>>> >> >
> >>>> >> > _______________________________________________
> >>>> >> > Users mailing list
> >>>> >> > Users at lists.opensips.org
> >>>> >> > http://lists.opensips.org/cgi-bin/mailman/listinfo/users
> >>>> >> >
> >>>> >>
> >>>> >>
> >>>> >>
> >>>> >> --
> >>>> >> VoIP Embedded, Inc.
> >>>> >> http://www.voipembedded.com
> >>>> >>
> >>>> >> _______________________________________________
> >>>> >> Users mailing list
> >>>> >> Users at lists.opensips.org
> >>>> >> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
> >>>> >
> >>>> >
> >>>> >
> >>>> >
> >>>> > --
> >>>> > ----------------------------------------------
> >>>> > Caio Pereira
> >>>> >
> >>>> > _______________________________________________
> >>>> > Users mailing list
> >>>> > Users at lists.opensips.org
> >>>> > http://lists.opensips.org/cgi-bin/mailman/listinfo/users
> >>>> >
> >>>>
> >>>>
> >>>>
> >>>> --
> >>>> VoIP Embedded, Inc.
> >>>> http://www.voipembedded.com
> >>>>
> >>>> _______________________________________________
> >>>> Users mailing list
> >>>> Users at lists.opensips.org
> >>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
> >>>
> >>>
> >>>
> >>>
> >>> --
> >>> ----------------------------------------------
> >>> Caio Pereira
> >>
> >>
> >>
> >>
> >> --
> >> ----------------------------------------------
> >> Caio Pereira
> >
> >
> >
> >
> > --
> > ----------------------------------------------
> > Caio Pereira
> >
> > _______________________________________________
> > Users mailing list
> > Users at lists.opensips.org
> > http://lists.opensips.org/cgi-bin/mailman/listinfo/users
> >
>
>
>
> --
> VoIP Embedded, Inc.
> http://www.voipembedded.com
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
--
----------------------------------------------
Caio Pereira
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20151026/57ed8e2c/attachment-0001.htm>
More information about the Users
mailing list