[OpenSIPS-Users] Cross Compile OpenSIPS ARMv7
Ovidiu Sas
osas at voipembedded.com
Wed Oct 21 16:10:53 CEST 2015
I was cross compiling opensips for several platforms and the fastlock
was disabled by default (regular locks were used instead).
It seems that you are not cross compiling.
You will need to track down in the Makefile how your compiler is
detected and what settings are applied.
For your reference, here's the makefile that I used for cross compiling:
http://svn.nslu2-linux.org/svnroot/optware/trunk/make/opensips.mk
Regards,
Ovidiu Sas
On Wed, Oct 21, 2015 at 9:37 AM, Caio <caiortp at gmail.com> wrote:
> It's possible to disable fastlock.h and futex_lock.h in the Makefile.conf?
>
> Thanks
>
> Regards,
>
> Caio Pereira
>
> 2015-10-20 18:49 GMT-02:00 Caio <caiortp at gmail.com>:
>>
>> Ovidiu,
>>
>> My Log
>>
>> echo $CC_EXTRA_OPTS
>> -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon
>> --sysroot=/home/caio/fsl-community-bsp/imx6/tmp/sysroots/imx6"
>>
>> CPU=armv7a
>> LD=arm-poky-linux-gnueabi-ld
>> --sysroot=/home/caio/fsl-community-bsp/imx6/tmp/sysroots/imx6
>>
>> CC=arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork
>> -mfloat-abi=hard -mfpu=neon
>> --sysroot=/home/caio/fsl-community-bsp/imx6/tmp/sysroots/imx6
>>
>>
>> cat Makefile.conf
>>
>> #DEFS+= -DPKG_MALLOC #Uses a faster malloc (exclusive w/ USE_SHM_MEM)
>> DEFS+= -DSHM_MMAP #Use mmap instead of SYSV shared memory
>> DEFS+= -DUSE_MCAST #Compile in support for IP Multicast
>> DEFS+= -DDISABLE_NAGLE #Disabled the TCP NAgle Algorithm ( lower delay )
>> DEFS+= -DSTATISTICS #Enables the statistics manager
>> DEFS+= -DHAVE_RESOLV_RES #Support for changing some of the resolver
>> parameters
>> #DEFS+= -DHP_MALLOC #High performance allocator with fine-grained locking
>> #DEFS+= -DF_MALLOC #An even faster allocator. Not recommended for
>> debugging
>> #DEFS+= -DF_MALLOC_OPTIMIZATIONS #Remove all internal checks in F_MALLOC
>> #DEFS+= -DDBG_QM_MALLOC #Allocator used for debugging information
>> #DEFS+= -DUSE_SHM_MEM #All PKG allocations are mapped to SHM ( exclusive
>> w/ PKG_MALLOC )
>> #DEFS+= -DDBG_F_MALLOC #TODO ?
>> #DEFS+= -DNO_DEBUG #Turns off all debug messages
>> #DEFS+= -DNO_LOG #Completely turns off all the logging
>> #DEFS+= -DVQ_MALLOC #TODO ?
>> #DEFS+= -DFAST_LOCK #Uses fast architecture specific locking
>> #DEFS+= -DUSE_FUTEX #Uses linux futexs with fast architecture specific
>> locking
>> DEFS+= -DUSE_SYSV_SEM #Uses SYSV sems for locking ( slower & limited
>> number of locks
>> #DEFS+= -DUSE_PTHREAD_MUTEX #Uses pthread mutexes
>> #DEFS+= -DBUSY_WAIT #Uses busy waiting on the lock
>> #DEFS+= -DDBG_LOCK #TODO ?
>> DEFS+= -DNOSMP #Do not use SMP sompliant locking. Faster but won't work on
>> SMP machines
>> #DEFS+= -DEXTRA_DEBUG #Compiles in some extra debugging code
>>
>>
>> make all
>> Compiling blacklists.c
>> In file included from blacklists.h:30:0,
>> from blacklists.c:38:
>> ip_addr.h: In function 'sockaddr2ip_addr':
>> ip_addr.h:224:25: warning: cast increases required alignment of target
>> type [-Wcast-align]
>> memcpy(ip->u.addr, &((struct sockaddr_in*)sa)->sin_addr, 4);
>> ^
>> ip_addr.h:229:25: warning: cast increases required alignment of target
>> type [-Wcast-align]
>> memcpy(ip->u.addr, &((struct sockaddr_in6*)sa)->sin6_addr, 16);
>> ^
>> In file included from locking.h:66:0,
>> from blacklists.h:32,
>> from blacklists.c:38:
>> lock_alloc.h: In function 'lock_set_alloc':
>> lock_alloc.h:70:13: warning: cast increases required alignment of target
>> type [-Wcast-align]
>> ls->locks=(gen_lock_t*)((char*)ls+sizeof(gen_lock_set_t));
>> ^
>> {standard input}: Assembler messages:
>> {standard input}:105: Error: bad instruction `btsl $0,[r6]'
>> {standard input}:106: Error: bad instruction `adcl $0,r3'
>> {standard input}:208: Error: bad instruction `movb $0,(r3)'
>> {standard input}:305: Error: bad instruction `btsl $0,[r9]'
>> {standard input}:306: Error: bad instruction `adcl $0,r3'
>> {standard input}:390: Error: bad instruction `movb $0,(r3)'
>> {standard input}:436: Error: bad instruction `btsl $0,[r10]'
>> {standard input}:437: Error: bad instruction `adcl $0,r3'
>> {standard input}:480: Error: bad instruction `movb $0,(r3)'
>> {standard input}:526: Error: bad instruction `btsl $0,[r10]'
>> {standard input}:527: Error: bad instruction `adcl $0,r3'
>> {standard input}:555: Error: bad instruction `movb $0,(r2)'
>> {standard input}:619: Error: bad instruction `btsl $0,[r10]'
>> {standard input}:620: Error: bad instruction `adcl $0,r3'
>> {standard input}:718: Error: bad instruction `movb $0,(r3)'
>> {standard input}:3194: Error: bad instruction `btsl $0,[r7]'
>> {standard input}:3195: Error: bad instruction `adcl $0,r6'
>> {standard input}:3249: Error: bad instruction `movb $0,(r3)'
>> {standard input}:3300: Error: bad instruction `btsl $0,[r7]'
>> {standard input}:3301: Error: bad instruction `adcl $0,r3'
>> {standard input}:3340: Error: bad instruction `movb $0,(r0)'
>> {standard input}:3366: Error: bad instruction `btsl $0,[r6]'
>> {standard input}:3367: Error: bad instruction `adcl $0,r3'
>> {standard input}:3411: Error: bad instruction `movb $0,(r1)'
>> {standard input}:3497: Error: bad instruction `btsl $0,[r6]'
>> {standard input}:3498: Error: bad instruction `adcl $0,r3'
>> {standard input}:3542: Error: bad instruction `movb $0,(r1)'
>> {standard input}:3795: Error: bad instruction `btsl $0,[r6]'
>> {standard input}:3796: Error: bad instruction `adcl $0,r3'
>> {standard input}:3839: Error: bad instruction `movb $0,(r3)'
>> {standard input}:3882: Error: bad instruction `btsl $0,[fp]'
>> {standard input}:3883: Error: bad instruction `adcl $0,r3'
>> {standard input}:3981: Error: bad instruction `movb $0,(r3)'
>> {standard input}:4020: Error: bad instruction `btsl $0,[r6]'
>> {standard input}:4021: Error: bad instruction `adcl $0,r3'
>> {standard input}:4081: Error: bad instruction `movb $0,(r3)'
>> {standard input}:4129: Error: bad instruction `btsl $0,[r10]'
>> {standard input}:4130: Error: bad instruction `adcl $0,r3'
>> {standard input}:4381: Error: bad instruction `movb $0,(r3)'
>> {standard input}:4837: Error: bad instruction `btsl $0,[fp]'
>> {standard input}:4838: Error: bad instruction `adcl $0,r3'
>> {standard input}:4951: Error: bad instruction `movb $0,(r3)'
>> {standard input}:5312: Error: bad instruction `btsl $0,[r6]'
>> {standard input}:5313: Error: bad instruction `adcl $0,r9'
>> {standard input}:5383: Error: bad instruction `btsl $0,[r8]'
>> {standard input}:5384: Error: bad instruction `adcl $0,r5'
>> {standard input}:5471: Error: bad instruction `movb $0,(r3)'
>> {standard input}:5510: Error: bad instruction `btsl $0,[r6]'
>> {standard input}:5511: Error: bad instruction `adcl $0,r3'
>> {standard input}:5557: Error: bad instruction `movb $0,(r3)'
>> {standard input}:5596: Error: bad instruction `btsl $0,[r9]'
>> {standard input}:5597: Error: bad instruction `adcl $0,r3'
>> {standard input}:5628: Error: bad instruction `movb $0,(r3)'
>> {standard input}:5889: Error: bad instruction `movb $0,(r3)'
>> {standard input}:5928: Error: bad instruction `btsl $0,[r8]'
>> {standard input}:5929: Error: bad instruction `adcl $0,r3'
>> {standard input}:5975: Error: bad instruction `movb $0,(r3)'
>> {standard input}:6014: Error: bad instruction `btsl $0,[r9]'
>> {standard input}:6015: Error: bad instruction `adcl $0,r3'
>> {standard input}:6045: Error: bad instruction `movb $0,(r3)'
>> {standard input}:6103: Error: bad instruction `btsl $0,[r10]'
>> {standard input}:6104: Error: bad instruction `adcl $0,r3'
>> {standard input}:6203: Error: bad instruction `movb $0,(r3)'
>> {standard input}:6323: Error: bad instruction `btsl $0,[r6]'
>> {standard input}:6324: Error: bad instruction `adcl $0,r3'
>> {standard input}:6421: Error: bad instruction `movb $0,(r3)'
>> {standard input}:6481: Error: bad instruction `btsl $0,[r9]'
>> {standard input}:6482: Error: bad instruction `adcl $0,r3'
>> {standard input}:6582: Error: bad instruction `movb $0,(r3)'
>> {standard input}:7101: Error: bad instruction `btsl $0,[r1]'
>> {standard input}:7102: Error: bad instruction `adcl $0,r3'
>> {standard input}:7232: Error: bad instruction `movb $0,(r3)'
>> {standard input}:7394: Error: bad instruction `btsl $0,[r2]'
>> {standard input}:7395: Error: bad instruction `adcl $0,r1'
>> {standard input}:7527: Error: bad instruction `movb $0,(r3)'
>> {standard input}:7803: Error: bad instruction `btsl $0,[r6]'
>> {standard input}:7804: Error: bad instruction `adcl $0,r3'
>> {standard input}:7912: Error: bad instruction `movb $0,(r3)'
>> {standard input}:8809: Error: bad instruction `btsl $0,[r4]'
>> {standard input}:8810: Error: bad instruction `adcl $0,r3'
>> {standard input}:8852: Error: bad instruction `movb $0,(r1)'
>> {standard input}:8883: Error: bad instruction `btsl $0,[r5]'
>> {standard input}:8884: Error: bad instruction `adcl $0,r3'
>> {standard input}:8930: Error: bad instruction `movb $0,(r3)'
>> {standard input}:8980: Error: bad instruction `btsl $0,[r10]'
>> {standard input}:8981: Error: bad instruction `adcl $0,r3'
>> {standard input}:9020: Error: bad instruction `movb $0,(r0)'
>> make: *** [blacklists.o] Error 1
>>
>>
>>
>>
>>
>> Thank you.
>>
>> Best Regards,
>>
>> Caio Pereira
>>
>>
>> 2015-10-20 18:28 GMT-02:00 Caio <caiortp at gmail.com>:
>>>
>>> Ovidiu Sas,
>>>
>>>
>>> In the Makefile.defs there a code to get the ARCH
>>>
>>> 90 ARCH := $(shell $(GETARCH) |sed -e s/i.86/i386/ -e s/sun4u/sparc64/
>>> \
>>> 91 -e s/armv4l/arm/ -e "s/Power Macintosh/ppc/"
>>> \
>>> 92 -e s/sun4v/sparc64/ -e "s/cobalt/mips2/" \
>>> 93 -e s/amd64/x86_64/ )
>>>
>>>
>>> I tried export ARCH=armv7 but because of the code, the ARCH will be
>>> always x86-64 (host machine) .
>>>
>>> I added the CFLAGS to the armv7 arch in the Makefile.defs
>>>
>>> 918 ifeq ($(ARCH), armv7)
>>> 919 # if gcc
>>> 920 ifeq ($(CC_NAME), gcc)
>>> 921 #common stuff
>>> 922 CFLAGS+=-O0 -mfloat-abi=hard
>>> -march=armv7-a -mthumb-interwork -Wcast-align $(PROFILE) \
>>> 923 -mfloat-abi=hard -mfpu=neon
>>> -mtune=cortex-a9 -Wall
>>> 924 endif
>>> 925 endif
>>>
>>>
>>> Which is the best way to pass the arch parameter to the Makefile?
>>>
>>> (sorry for the typo in the last email).
>>>
>>> Thank you very much.
>>>
>>> Best Regards,
>>>
>>> Caio Pereira
>>>
>>> 2015-10-20 17:17 GMT-02:00 Ovidiu Sas <osas at voipembedded.com>:
>>>>
>>>> The optimizations are done via the compiler flags: CFLAGS.
>>>> You need to replace -09 with -00.
>>>> You need to check if you are using a native compiler or a cross one
>>>> and adjust the proper flags inside Makefile.defs.
>>>>
>>>> Regards,
>>>> Ovidiu Sas
>>>>
>>>> On Tue, Oct 20, 2015 at 1:53 PM, Caio <caiortp at gmail.com> wrote:
>>>> > Hello, Oividiu!
>>>> >
>>>> > Sorry for the delay, I was on vacation.
>>>> >
>>>> > I'm writing a recipe to Yocto.
>>>> > This ARM cpu is new (armv7-a), but I see that is not compatible with
>>>> > opensips's optimization.
>>>> > I'm new with opensips, I have only tested in my host machine x86-64.
>>>> >
>>>> >
>>>> > Do you know with parameters I need to comment in the Makefile.conf to
>>>> > have a
>>>> > basic compilation without any optimization in the opensips?
>>>> >
>>>> >
>>>> > #DEFS+= -DPKG_MALLOC #Uses a faster malloc (exclusive w/ USE_SHM_MEM)
>>>> > #DEFS+= -DSHM_MMAP #Use mmap instead of SYSV shared memory
>>>> > DEFS+= -DUSE_MCAST #Compile in support for IP Multicast
>>>> > DEFS+= -DDISABLE_NAGLE #Disabled the TCP NAgle Algorithm ( lower delay
>>>> > )
>>>> > DEFS+= -DSTATISTICS #Enables the statistics manager
>>>> > DEFS+= -DHAVE_RESOLV_RES #Support for changing some of the resolver
>>>> > parameters
>>>> > #DEFS+= -DHP_MALLOC #High performance allocator with fine-grained
>>>> > locking
>>>> > DEFS+= -DF_MALLOC #An even faster allocator. Not recommended for
>>>> > debugging
>>>> > #DEFS+= -DF_MALLOC_OPTIMIZATIONS #Remove all internal checks in
>>>> > F_MALLOC
>>>> > #DEFS+= -DDBG_QM_MALLOC #Allocator used for debugging information
>>>> > #DEFS+= -DUSE_SHM_MEM #All PKG allocations are mapped to SHM (
>>>> > exclusive w/
>>>> > PKG_MALLOC )
>>>> > #DEFS+= -DDBG_F_MALLOC #TODO ?
>>>> > #DEFS+= -DNO_DEBUG #Turns off all debug messages
>>>> > #DEFS+= -DNO_LOG #Completely turns off all the logging
>>>> > #DEFS+= -DVQ_MALLOC #TODO ?
>>>> > #DEFS+= -DFAST_LOCK #Uses fast architecture specific locking
>>>> > #DEFS+= -DUSE_FUTEX #Uses linux futexs with fast architecture specific
>>>> > locking
>>>> > #DEFS+= -DUSE_SYSV_SEM #Uses SYSV sems for locking ( slower & limited
>>>> > number
>>>> > of locks
>>>> > #DEFS+= -DUSE_PTHREAD_MUTEX #Uses pthread mutexes
>>>> > #DEFS+= -DBUSY_WAIT #Uses busy waiting on the lock
>>>> > #DEFS+= -DDBG_LOCK #TODO ?
>>>> >
>>>> >
>>>> >
>>>> > Thank you!
>>>> >
>>>> > Best Regards,
>>>> >
>>>> > Caio Pereira
>>>> >
>>>> >
>>>> > 2015-09-23 21:48 GMT-03:00 Ovidiu Sas <osas at voipembedded.com>:
>>>> >>
>>>> >> Hello Caio,
>>>> >>
>>>> >> Have you managed to cross compile opensips?
>>>> >> The optimizations do not work for older type of arm CPUs.
>>>> >> Did you experienced any issues running opensips on arm?
>>>> >>
>>>> >> Regards,
>>>> >> Ovidiu Sas
>>>> >>
>>>> >> On Thu, Sep 17, 2015 at 2:51 PM, Caio <caiortp at gmail.com> wrote:
>>>> >> > Hello,
>>>> >> >
>>>> >> > I would like to cross compile the opensips to ARMv7 architecture
>>>> >> > (Freescale
>>>> >> > IMX6).
>>>> >> > I saw that there's some optimization in assembly to lock functions.
>>>> >> > There's some configuration in the Makeconfig.conf options that I
>>>> >> > need
>>>> >> > disable or enable to able the opensips run in my target
>>>> >> > architecutre?
>>>> >> >
>>>> >> > Thank you very much.
>>>> >> >
>>>> >> > Best Regards
>>>> >> >
>>>> >> >
>>>> >> >
>>>> >> > --
>>>> >> > ----------------------------------------------
>>>> >> > Caio Pereira
>>>> >> >
>>>> >> > _______________________________________________
>>>> >> > Users mailing list
>>>> >> > Users at lists.opensips.org
>>>> >> > http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>> >> >
>>>> >>
>>>> >>
>>>> >>
>>>> >> --
>>>> >> VoIP Embedded, Inc.
>>>> >> http://www.voipembedded.com
>>>> >>
>>>> >> _______________________________________________
>>>> >> Users mailing list
>>>> >> Users at lists.opensips.org
>>>> >> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>> >
>>>> >
>>>> >
>>>> >
>>>> > --
>>>> > ----------------------------------------------
>>>> > Caio Pereira
>>>> >
>>>> > _______________________________________________
>>>> > Users mailing list
>>>> > Users at lists.opensips.org
>>>> > http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>> >
>>>>
>>>>
>>>>
>>>> --
>>>> VoIP Embedded, Inc.
>>>> http://www.voipembedded.com
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users at lists.opensips.org
>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>
>>>
>>>
>>>
>>> --
>>> ----------------------------------------------
>>> Caio Pereira
>>
>>
>>
>>
>> --
>> ----------------------------------------------
>> Caio Pereira
>
>
>
>
> --
> ----------------------------------------------
> Caio Pereira
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
--
VoIP Embedded, Inc.
http://www.voipembedded.com
More information about the Users
mailing list