[OpenSIPS-Users] Cross Compile OpenSIPS ARMv7

[Ovidiu Sas]

The optimizations are done via the compiler flags: CFLAGS.
You need to replace -09 with -00.
You need to check if you are using a native compiler or a cross one
and adjust the proper flags inside Makefile.defs.

Regards,
Ovidiu Sas

On Tue, Oct 20, 2015 at 1:53 PM, Caio <caiortp at gmail.com> wrote:
> Hello, Oividiu!
>
> Sorry for the delay, I was on vacation.
>
> I'm writing a recipe to Yocto.
> This ARM cpu is new (armv7-a), but I see that is not compatible with
> opensips's optimization.
> I'm new with opensips, I have only  tested in my host machine x86-64.
>
>
> Do you know with parameters I need to comment in the Makefile.conf to have a
> basic compilation without any optimization in the opensips?
>
>
> #DEFS+= -DPKG_MALLOC #Uses a faster malloc (exclusive w/ USE_SHM_MEM)
> #DEFS+= -DSHM_MMAP #Use mmap instead of SYSV shared memory
> DEFS+= -DUSE_MCAST #Compile in support for IP Multicast
> DEFS+= -DDISABLE_NAGLE #Disabled the TCP NAgle Algorithm ( lower delay )
> DEFS+= -DSTATISTICS #Enables the statistics manager
> DEFS+= -DHAVE_RESOLV_RES #Support for changing some of the resolver
> parameters
> #DEFS+= -DHP_MALLOC #High performance allocator with fine-grained locking
> DEFS+= -DF_MALLOC #An even faster allocator. Not recommended for debugging
> #DEFS+= -DF_MALLOC_OPTIMIZATIONS #Remove all internal checks in F_MALLOC
> #DEFS+= -DDBG_QM_MALLOC #Allocator used for debugging information
> #DEFS+= -DUSE_SHM_MEM #All PKG allocations are mapped to SHM ( exclusive w/
> PKG_MALLOC )
> #DEFS+= -DDBG_F_MALLOC #TODO ?
> #DEFS+= -DNO_DEBUG #Turns off all debug messages
> #DEFS+= -DNO_LOG #Completely turns off all the logging
> #DEFS+= -DVQ_MALLOC #TODO ?
> #DEFS+= -DFAST_LOCK #Uses fast architecture specific locking
> #DEFS+= -DUSE_FUTEX #Uses linux futexs with fast architecture specific
> locking
> #DEFS+= -DUSE_SYSV_SEM #Uses SYSV sems for locking ( slower & limited number
> of locks
> #DEFS+= -DUSE_PTHREAD_MUTEX #Uses pthread mutexes
> #DEFS+= -DBUSY_WAIT #Uses busy waiting on the lock
> #DEFS+= -DDBG_LOCK #TODO ?
>
>
>
> Thank you!
>
> Best Regards,
>
> Caio Pereira
>
>
> 2015-09-23 21:48 GMT-03:00 Ovidiu Sas <osas at voipembedded.com>:
>>
>> Hello Caio,
>>
>> Have you managed to cross compile opensips?
>> The optimizations do not work for older type of arm CPUs.
>> Did you experienced any issues running opensips on arm?
>>
>> Regards,
>> Ovidiu Sas
>>
>> On Thu, Sep 17, 2015 at 2:51 PM, Caio <caiortp at gmail.com> wrote:
>> > Hello,
>> >
>> > I would like to cross compile the opensips to ARMv7 architecture
>> > (Freescale
>> > IMX6).
>> > I saw that there's some optimization in assembly to lock functions.
>> > There's some configuration in the Makeconfig.conf options that I need
>> > disable or enable to able the opensips run in my target architecutre?
>> >
>> > Thank you very much.
>> >
>> > Best Regards
>> >
>> >
>> >
>> > --
>> > ----------------------------------------------
>> > Caio Pereira
>> >
>> > _______________________________________________
>> > Users mailing list
>> > Users at lists.opensips.org
>> > http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>> >
>>
>>
>>
>> --
>> VoIP Embedded, Inc.
>> http://www.voipembedded.com
>>
>> _______________________________________________
>> Users mailing list
>> Users at lists.opensips.org
>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>
>
>
> --
> ----------------------------------------------
> Caio Pereira
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>



-- 
VoIP Embedded, Inc.
http://www.voipembedded.com