[OpenSIPS-Users] Using Opensips as loadbalancer(Status 405 Method not allowed 0 bindings)

[Bogdan-Andrei Iancu]

Maybe your REGISTER and INVITE were sent to different servers ??

Regards,

Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com

On 27.05.2014 14:01, Kaan Dandin wrote:
> Hi Bogdan,
> Thanks for the answer . I have managed to configure dispatcher and 
> load_balancer modules.
> Now I can successfuly register to OpenIMS through OpenSIPS dispatcher 
> module.
> But when I try to make a call with Invite message after registration 
> through OpenSIPS I get “403 Forbidden Not registered” error.
> When I check the wireshark traces and check the difference between the 
> Invite messages  with and without OpenSIPS in between Client and OpenIMS:
> The difference is changing port number(from 4060 to 5060) when the 
> message went through OpenSIPS. How I can prevent changing port number?
> BR,
> Kaan
>
>
> On Monday, May 26, 2014 9:15 AM, Bogdan-Andrei Iancu 
> <bogdan at opensips.org> wrote:
>
>
> Hi Kaan,
>
> As said, the 405 reply is from script and is trigger if you have 
> initial SIP requests that are not INVITEs - check your sip traffic or, 
> in the script, log (via xlog) the method name when this 405 is sent.
>
> Regards,
> Bogdan-Andrei Iancu
> OpenSIPS Founder and Developer
> http://www.opensips-solutions.com/
> On 25.05.2014 23:45, Kaan Dandin wrote:
>> Hi Bogdan,
>>
>> Thanks for your quick answer.
>>
>> I have tried SIP REGISTER by loading and  configuring Dispatcher 
>> module ,  but faced same error message.
>>
>> In the mean time , I have investigated a paper which used OpenSIPS as LB.
>> In this paper it mentions that it is using Opensips as Load Balancer 
>>  and also uses LB for  SIP REGISTRATION.
>>
>>
>>
>>
>> ,
>>
>>
>>
>>
>> BR,
>> Kaan
>>
>> On 23 May 2014, at 15:47, Bogdan-Andrei Iancu <bogdan at opensips.org 
>> <mailto:bogdan at opensips.org>> wrote:
>>
>>> Kaan,
>>>
>>> The LB module is exclusively for calls (nothing else than INVITEs) - 
>>> because the "load" is the actual number of calls (please refer to 
>>> the documentation).
>>>
>>> If you want to distribute/LB other methods, I recommend you using 
>>> the dispatcher module.
>>> http://www.opensips.org/html/docs/modules/1.11.x/dispatcher.html
>>>
>>> Regards,
>>> Bogdan-Andrei Iancu
>>> OpenSIPS Founder and Developer
>>> http://www.opensips-solutions.com/
>>> On 23.05.2014 13:35, Kaan Dandin wrote:
>>>> Hi Bogdan,
>>>>
>>>> Thanks for the quick response.
>>>> The method is Register.  I am using standard load balancer 
>>>> configuration script generated by opensips version 1.9 make 
>>>> menuconfig. Which lines I should add for register method.?
>>>>
>>>> BR,
>>>> Kaan
>>>>
>>>>
>>>> Samsung Mobile tarafından gönderildi
>>>>
>>>>
>>>> -------- Orjinal mesaj --------
>>>> Kimden: Bogdan-Andrei Iancu
>>>> Tarih:23 05 2014 13:16 (GMT+02:00)
>>>> Alıcı: OpenSIPS users mailling list ,kaandandin at yahoo.com 
>>>> <mailto:kaandandin at yahoo.com>
>>>> Konu: Re: [OpenSIPS-Users] Using Opensips as loadbalancer(Status 
>>>> 405 Method not allowed 0 bindings)
>>>>
>>>> Hi Kaan,
>>>>
>>>> If OpenSIPS is the one sending the 405 reply (you can check that by 
>>>> simply doing a sip capture on the opensips machine), it is from the 
>>>> script - check what method you have in your test traffic - that 
>>>> method may be rejected from the script you use.
>>>>
>>>> Regards,
>>>> Bogdan-Andrei Iancu
>>>> OpenSIPS Founder and Developer
>>>> http://www.opensips-solutions.com/
>>>> On 22.05.2014 21:22, Kaan Dandin wrote:
>>>>> Hi all,
>>>>> I am building a test environment using OpenSIPS and OpenIMS.
>>>>> I have successfuly installed OpenIMS and able to make 
>>>>> registrations and start calls from Monster client.
>>>>> Between the IMS client and OpenIMS P-CSCF’s , I will put OpenSIPS 
>>>>> as load balancer.
>>>>> I have installed OpenSIPS and “OpenSIPS Control Panel” successfully.
>>>>> I have inserted the configuration for load balancing from OpenSIPS 
>>>>> Control Panel as following.
>>>>> mysql> select * from load_balancer;
>>>>> +----+----------+-----------------+-----------+------------+-------------+
>>>>> | id | group_id | dst_uri | resources | probe_mode | description |
>>>>> +----+----------+-----------------+-----------+------------+-------------+
>>>>> |  4 |        1 | sip:192.168.2.2 | pstn=500  |          0 | 
>>>>> pcscf2      |
>>>>> |  3 |        1 | sip:192.168.2.1 | pstn=500  |          0 | 
>>>>> pcscf1      |
>>>>> +----+----------+-----------------+-----------+------------+-------------+
>>>>> When  I start a registration from Monster IMS client I get 
>>>>> following error.
>>>>> 192.168.2.10 192.168.2.141 SIP Request: REGISTER sip:open-ims.test
>>>>> 192.168.2.141 192.168.2.10 SIP Status: 405 Method Not Allowed    
>>>>> (0 bindings)
>>>>> Load balancer:192.168.2.141
>>>>> Client:192.168.2.10
>>>>> Can someone help me to identify this problem?
>>>>> BR,
>>>>> Kaan
>>>>> Windows Posta'dan gönderildi
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Users mailing list
>>>>> Users at lists.opensips.org  <mailto:Users at lists.opensips.org>
>>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>>
>>>
>>
>
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20140527/2413fe93/attachment.htm>