[OpenSIPS-Users] Using Opensips as loadbalancer(Status 405 Method not allowed 0 bindings)

[Kaan Dandin]

Hi Bogdan,
 
Thanks for the answer . I have managed to configure dispatcher and load_balancer modules.
 
Now I can successfuly register to OpenIMS through OpenSIPS dispatcher module.
 
But when I try to make a call with Invite message after registration through OpenSIPS I get “403 Forbidden Not registered” error.
 
When I check the wireshark traces and check the difference between the Invite messages  with and without OpenSIPS in between Client and OpenIMS:
The difference is changing port number(from 4060 to 5060) when the message went through OpenSIPS. How I can prevent changing port number?
 
BR,
Kaan
 
 
 



  


On Monday, May 26, 2014 9:15 AM, Bogdan-Andrei Iancu <bogdan at opensips.org> wrote:
  


Hi Kaan,

As said, the 405 reply is from script and is trigger if you have
        initial SIP requests that are not INVITEs - check your sip
        traffic or, in the script, log (via xlog) the method name when
        this 405 is sent.

Regards,
 
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer http://www.opensips-solutions.com/
On 25.05.2014 23:45, Kaan Dandin wrote:
 
Hi Bogdan, 
>
> 
>Thanks for your quick answer. 
>
> 
>I have tried SIP REGISTER by loading and  configuring Dispatcher module ,  but faced same error message. 
>
> 
>In the mean time , I have investigated a paper which used OpenSIPS as LB. 
>In this paper it mentions that it is using Opensips as Load Balancer  and also uses LB for  SIP REGISTRATION. 
>
> 
>
> 
> 
>
>, 
>
> 
> 
>
>
> 
>BR, 
>Kaan 
>
> 
>On 23 May 2014, at 15:47, Bogdan-Andrei Iancu <bogdan at opensips.org> wrote: 
>
>Kaan,
>>
>>The LB module is exclusively for calls (nothing else
                  than INVITEs) - because the "load" is the actual
                  number of calls (please refer to the documentation).
>>
>>If you want to distribute/LB other methods, I
                  recommend you using the dispatcher module.
>>    http://www.opensips.org/html/docs/modules/1.11.x/dispatcher.html
>>
>>Regards,
>> 
>>Bogdan-Andrei Iancu
OpenSIPS Founder and Developer http://www.opensips-solutions.com/
On 23.05.2014 13:35, Kaan Dandin wrote:
>> 
>>Hi Bogdan,  
>>>
>>> 
>>>Thanks for the quick response.  
>>>The method is Register.  I am using standard load balancer configuration script generated by opensips version 1.9 make menuconfig. Which lines I should add for register method.? 
>>>
>>> 
>>>BR,  
>>>Kaan 
>>>
>>> 
>>>
>>> 
>>>Samsung Mobile tarafından gönderildi   
>>>
>>>
>>>-------- Orjinal mesaj -------- 
>>>Kimden: Bogdan-Andrei Iancu  
>>>Tarih:23 05 2014 13:16 (GMT+02:00)  
>>>Alıcı: OpenSIPS users mailling list ,kaandandin at yahoo.com  
>>>Konu: Re: [OpenSIPS-Users] Using Opensips as loadbalancer(Status 405 Method not allowed 0 bindings)  
>>>
>>> 
>>>Hi Kaan,
>>>
>>>    
>If OpenSIPS is the one sending the 405 reply (you can check that by simply doing a sip capture on the opensips machine), it is from the script - check what method you have in your test traffic - that method may be rejected from the script you use.
>>>
>>>Regards,
>>> 
>>>Bogdan-Andrei Iancu
OpenSIPS Founder and Developer http://www.opensips-solutions.com/
On 22.05.2014 21:22, Kaan Dandin wrote:
>>> 
>>>Hi all, 
>>>>
>>>>I am building a test environment using OpenSIPS and OpenIMS. 
>>>>
>>>>I have successfuly installed OpenIMS and able to make registrations and start calls from Monster client. 
>>>>
>>>>Between the IMS client and OpenIMS P-CSCF’s , I will put OpenSIPS as load balancer. 
>>>>
>>>>I have installed OpenSIPS and “OpenSIPS Control Panel” successfully. 
>>>>
>>>>I have inserted the configuration for load balancing from OpenSIPS Control Panel as following. 
>>>>
>>>>mysql> select * from load_balancer;
>>>>+----+----------+-----------------+-----------+------------+-------------+
>>>>| id | group_id | dst_uri         | resources |
                      probe_mode | description |
>>>>+----+----------+-----------------+-----------+------------+-------------+
>>>>|  4 |        1 | sip:192.168.2.2 | pstn=500  |          0 | pcscf2      |
>>>>|  3 |        1 | sip:192.168.2.1 | pstn=500  |          0 | pcscf1      |
>>>>+----+----------+-----------------+-----------+------------+-------------+
>>>> 
>>>>When  I start a registration from Monster IMS client I get following error. 
>>>>
>>>>192.168.2.10 192.168.2.141 SIP Request: REGISTER sip:open-ims.test 
>>>>192.168.2.141 192.168.2.10 SIP Status: 405 Method Not Allowed    (0 bindings) 
>>>>
>>>>Load balancer:192.168.2.141 
>>>>Client:192.168.2.10 
>>>>
>>>>Can someone help me to identify this problem? 
>>>>
>>>>BR, 
>>>>Kaan 
>>>>
>>>>
>>>>Windows Posta'dan gönderildi 
>>>>  
>>>> 
>>>>
>>>>_______________________________________________
Users mailing list Users at lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users   
>>> 
>>   
>  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20140527/082bb454/attachment.htm>