[OpenSIPS-Users] 403 Rely forbidden

[Stefano Pisani]

opensipsctl add domain ... etc.

"opensipsctl --help" can help



Il 26/04/2014 16.13, info at vintageelectronics.ca ha scritto:
> Stephano,
>
> Just realized that I only replied directly to you so this probably 
> never hit the maillist.
> Ok, now I understand that a local domain has to be defined, but don't 
> know how to achieve that.
> Any tips?
>
> Thank you!
>
> On 04/25/2014 09:14 AM, Stefano Pisani wrote:
>> If you do not define a local domain OpenSIPS can't understand that 
>> SIP messase is for him.
>>
>> Il 25/04/2014 13.36, info at vintageelectronics.ca ha scritto:
>>> Most likely not, as I did not make any configuration changes besides 
>>> changing listen IP to 10.10.10.3 and port to 5066.
>>> My install is the same as came from the rpm.
>>> What do I need to do to define the local domains?
>>>
>>> Thank you!
>>>
>>> On 04/25/2014 03:18 AM, Stefano Pisani wrote:
>>>> Did you defined local domains in OpenSIPS? 10.10.10.3 should be one 
>>>> of them.
>>>>
>>>> Il 25/04/2014 00.40, info at vintageelectronics.ca ha scritto:
>>>>> Would this be sufficient? I just ran `ngrep -d lo` - let me know 
>>>>> if I should use different options:
>>>>>
>>>>> # ngrep -d lo
>>>>> interface: lo (127.0.0.0/255.0.0.0)
>>>>> #############
>>>>> T 10.10.10.3:43236 -> 10.10.10.3:5066 [AP]
>>>>>   OPTIONS sip:10.10.10.3 SIP/2.0..Call-ID: 
>>>>> d1c9a44f67f3c5dcfd0d917fad134e47 at 0:0:0:0:0:0:0:0..CSeq: 111 
>>>>> OPTIONS..From: "user0 at SIP" <sip:user0 at 10.10.10.3>;tag=7b34c5d
>>>>>   6..To: "user0 at SIP" <sip:user0 at 10.10.10.3>..Via: SIP/2.0/TCP 
>>>>> 10.10.10.3:43236;branch=z9hG4bK-313736-2cb10f1cb92f117c858e374b091830eb..Max-Forwards: 
>>>>> 70..Contact: "a
>>>>>   lexim at SIP" 
>>>>> <sip:user0 at 10.10.10.3:43236;transport=tcp;registering_acc=10_10_10_3>..User-Agent: 
>>>>> Jitsi2.5.5193Linux..Allow: INFO,OPTIONS,MESSAGE,BYE,REFER,SUBSCRIBE,A
>>>>>   CK,CANCEL,PUBLISH,NOTIFY,INVITE..Allow-Events: 
>>>>> refer..Content-Length: 0....
>>>>> #
>>>>> T 10.10.10.3:5066 -> 10.10.10.3:43236 [AP]
>>>>>   SIP/2.0 403 Rely forbidden..Call-ID: 
>>>>> d1c9a44f67f3c5dcfd0d917fad134e47 at 0:0:0:0:0:0:0:0..CSeq: 111 
>>>>> OPTIONS..From: "user0 at SIP" <sip:user0 at 10.10.10.3>;tag=7b34c5d6..T
>>>>>   o: "user0 at SIP" 
>>>>> <sip:user0 at 10.10.10.3>;tag=ed31db4a4567c982708589607dc4dd7d.6e52..Via: 
>>>>> SIP/2.0/TCP 
>>>>> 10.10.10.3:43236;branch=z9hG4bK-313736-2cb10f1cb92f117c858e374b0
>>>>>   91830eb..Server: OpenSIPS (1.10.1-tls 
>>>>> (x86_64/linux))..Content-Length: 0....
>>>>> ##
>>>>> T 10.10.10.3:43236 -> 10.10.10.3:5066 [AP]
>>>>>   MESSAGE sip:user1 at 10.10.10.3 SIP/2.0..Call-ID: 
>>>>> cf8432a003f376bea826a03b1d6c2791 at 0:0:0:0:0:0:0:0..CSeq: 694827676 
>>>>> MESSAGE..From: "user0 at SIP" <sip:user0 at 10.10.10.3>;
>>>>>   tag=29fbaeac..To: <sip:user1 at 10.10.10.3>..Via: SIP/2.0/TCP 
>>>>> 10.10.10.3:43236;branch=z9hG4bK-313736-c420c7a03fba6256d5863512fbdd6683..Max-Forwards: 
>>>>> 70..Content-Type: t
>>>>>   ext/plain..Contact: "user0 at SIP" 
>>>>> <sip:user0 at 10.10.10.3:43236;transport=tcp;registering_acc=10_10_10_3>..User-Agent: 
>>>>> Jitsi2.5.5193Linux..Content-Length: 44....test
>>>>>   .  .... . . .   . .  .   ..  .   .. ..
>>>>> #
>>>>> T 10.10.10.3:5066 -> 10.10.10.3:43236 [AP]
>>>>>   SIP/2.0 403 Rely forbidden..Call-ID: 
>>>>> cf8432a003f376bea826a03b1d6c2791 at 0:0:0:0:0:0:0:0..CSeq: 694827676 
>>>>> MESSAGE..From: "user0 at SIP" <sip:user0 at 10.10.10.3>;tag=29fba
>>>>>   eac..To: 
>>>>> <sip:user1 at 10.10.10.3>;tag=ed31db4a4567c982708589607dc4dd7d.3249..Via: 
>>>>> SIP/2.0/TCP 
>>>>> 10.10.10.3:43236;branch=z9hG4bK-313736-c420c7a03fba6256d5863512fbdd6683..
>>>>>   Server: OpenSIPS (1.10.1-tls (x86_64/linux))..Content-Length: 0....
>>>>> #########^Cexit
>>>>> 52 received, 0 dropped
>>>>>
>>>>>
>>>>> On 04/24/2014 06:26 PM, Stefano Pisani wrote:
>>>>>> Could you dump the SIP dialog using ngrep on opensips server? and 
>>>>>> post it?
>>>>>>
>>>>>> Il 25/04/2014 00.17, info at vintageelectronics.ca ha scritto:
>>>>>>> My installation is essentially vanilla, whatever came with the 
>>>>>>> rpms except for listen port/IP.
>>>>>>> Where in which file should I seek the ruri header and what 
>>>>>>> should it be set to?
>>>>>>> I did a global search in /etc/opensips and found its only 
>>>>>>> mention at line 229 of opensips.cfg (it's a comment):
>>>>>>>
>>>>>>>     if ($rU==NULL) {
>>>>>>>         # request with no Username in RURI
>>>>>>>         sl_send_reply("484","Address Incomplete");
>>>>>>>         exit;
>>>>>>>     }
>>>>>>>
>>>>>>> Thank you!
>>>>>>>
>>>>>>> On 04/23/2014 08:12 PM, Tito Cumpen wrote:
>>>>>>>> it means that the server isnt identifying itself as the host. 
>>>>>>>> Please take a look at the ruri header host portion and verify 
>>>>>>>> that your server is aware of all alias hostnames.
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Wed, Apr 23, 2014 at 7:10 PM, <info at vintageelectronics.ca 
>>>>>>>> <mailto:info at vintageelectronics.ca>> wrote:
>>>>>>>>
>>>>>>>>     Getting this error from Jitsi when sending text messages or
>>>>>>>>     trying to place a voice call between the registered contacts:
>>>>>>>>>
>>>>>>>>>      The above message could not be delivered
>>>>>>>>>     A network problem occurred. Please check your network
>>>>>>>>>     configuration and try again. Error was: 403 Rely forbidden
>>>>>>>>>
>>>>>>>>
>>>>>>>>     What is Rely and what does that error mean?
>>>>>>>>
>>>>>>>>     Thank you!
>>>>>>>>
>>>>>
>>>>
>>>
>>
>
>
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20140426/00ecba09/attachment-0001.htm>