[OpenSIPS-Users] INVITE not forwarded, call fails

[Bogdan-Andrei Iancu]

Hi Lorenzo,

When comes to NAT traversal, you can do it in two ways:

1) on the client (UAC) side - the client is doing the signalling in such 
a way that the server "sees" the traffic as coming from a public IP. 
This is actually STUN approach -> the server has 0 capabilities in 
handling NAT.

2)  on the server side - the client has 0 capabilities in handling NAT 
traversal and the whole task must be done by server. In this case you 
need to configure opensips to do the nat traversal - to correct both 
signalling and RTP for coping with NAt.

My understanding is you tried the first approach, but it fails due poor 
STUN/NAT working. So, you what to move into 2), right ? IF so, take a 
look at the nathelper module.

Regards,
Bogdan

lorenzo wrote:
> On 22/01/10 18:55, Bogdan-Andrei Iancu wrote:
>   
>> Hi Lorenzo,
>>
>> rport stuff applies to VIA port and it used only for sending back the 
>> replies (to a request).
>>
>> Your problem is the the Contact URI (the bogus port) which has nothing 
>> to do with rport.
>>     
>
> perfect, thanks for clarifying this!
>
> but if the problem is a wrong port in the Contact uri, can't $source_uri
> fix the issue? (or fix_contact() maybe)
> do they update/write to the user location database?
>
> i've been experimenting with both, in the main route, but they don't
> seem to work, i.e. the ul always shows the wrong contact port..
>
>   
>> Regards,
>> Bogdan
>>     
>
> thanks,
> Lorenzo
>
>
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>   


-- 
Bogdan-Andrei Iancu
www.voice-system.ro