[OpenSIPS-Users] SIP session termination doesn't work properly

[Bogdan-Andrei Iancu]

Hi Simon,

The User-Agent: MAYAH Communications V2.0.0.44 (callee party) is bogus 
as it does not mirror the RR headers from the received INVITE.

It receives:

U 192.168.1.60:5060 -> 192.168.1.70:5060
INVITE sip:Centauri at 192.168.1.70:5060 SIP/2.0.
Record-Route: <sip:192.168.1.60;lr=on;ftag=ZoSgtn2eqKF>.
....


but the 200 OK

U 192.168.1.70:5060 -> 192.168.1.60:5060
SIP/2.0 200 OK.
Via: SIP/2.0/UDP 192.168.1.60;branch=z9hG4bK6e58.04604ae3.0.
Via: SIP/2.0/UDP 192.168.1.50:5060;branch=z9hG4bKp65iCSWas2K;received=192.168.1.50;rport=5060.
Max-Forwards: 70.
To: <sip:mayah2 at 192.168.1.60>;tag=SetXW2miM8y.
From: <sip:mayah1 at 192.168.1.60>;tag=ZoSgtn2eqKF.
Call-ID: ZoSgtn2e1242662605 at 192.168.1.50.
CSeq: 2 INVITE.
Contact: sip:Centauri at 192.168.1.70:5060.
User-Agent: MAYAH Communications V2.0.0.44.
Content-Length: 289.
Content-Type: application/sdp.
....

has not RR header mirrored (as per RFC3261) back to the caller - because 
of this, the BYE cannot be properly routed.

Regards,
Bogdan

Simon Witte wrote:
> Hi Bogdan,
>
> I just captured the two sessions with ngrep (attached to this mail). Suprisingly, the dialog between the two laptops is all good with ngrep.
> But when I use the two mayah centauri hardware codecs, there is still the problem with the "404 - not here". Which brings me back to my assumption that it is not a opensips problem. Can you confirm that?
>
> Thanks & best regards,
> Simon
>
>
>
> -------- Original-Nachricht --------
>   
>> Datum: Mon, 18 May 2009 17:45:54 +0300
>> Von: Bogdan-Andrei Iancu <bogdan at voice-system.ro>
>> An: simon.witte at gmx.de
>> CC: users at lists.opensips.org
>> Betreff: Re: [OpenSIPS-Users] SIP session termination doesn\'t work properly
>>     
>
>   
>> Hi Simon,
>>
>> could you post the SIP capture with full message (use ngrep on the 
>> machine) - otherwise it it rather impossible to figure out what is going 
>> on there.
>>
>> Regards,
>> Bogdan
>>
>> Simon Witte wrote:
>>     
>>> Hi all,
>>>
>>>
>>> I'm having trouble with the proper termination of SIP sessions going 
>>> through my proxy server (opensips 1.5.1)
>>> There are 2 scenarios so far:
>>>
>>> 1) Session between two hardware audiocodec (Mayah Centauri)
>>>     The BYE from one client isn't answered by a "200 - OK" but a "404 - 
>>> Not here". First one client tries 12 times, then the other one.
>>>
>>>     screenshots from wireshark: 
>>> http://www.vivid-vision.de/Files/bye_404_no1.jpg
>>>                                                   
>>> http://www.vivid-vision.de/Files/bye_404_no2.jpg
>>>
>>> 2) Session between two laptops using a sip-software
>>>     the BYE seems to hop from one client to the other until it times
>>>       
>> out.
>>     
>>>    
>>>     screenshot from wireshark: 
>>> http://www.vivid-vision.de/Files/bye_timeout.jpg
>>>
>>>
>>> Can somebody please tell if there's something wrong with the routing 
>>> logic or has a hint to what the problem might be?
>>> I'm not so sure yet, if it's an opensips-problem, but I want to rule it 
>>> out first.
>>>
>>> Thank you all in advance.
>>>
>>>
>>> Best regards,
>>> Simon
>>>
>>>
>>>   
>>>       
>
>