[OpenSIPS-Users] help in configuring load balancer for outbound dial

Bogdan-Andrei Iancu bogdan at voice-system.ro
Thu Jun 11 11:26:34 CEST 2009


Hi Leo,

So you do the lb_reload without changing anything in DB and then you try 
to establish some new calls, which fail...ok. But my question was - the 
initial 5 calls you set before the reload, are still ongoing? or they 
are terminated?

Regards,
Bogdan

Leo Thomas Selvaraj wrote:
>
> Bogdan,
>
>  
>
> Please find my response below in red.
>
>  
>
> Leo Thomas Selvaraj 
>
>  T: +1 609-987-0044 x 139 | F: +1 609-987-9787
>
>  
>
>  
>
>  The information contained in this e-mail message or messages (which 
> includes any attachments) is confidential and may be legally 
> privileged. It is intended only for the use of the person or entity to 
> which it is addressed.
>
>  
>
>  
>
> -----Original Message-----
> From: Bogdan-Andrei Iancu [mailto:bogdan at voice-system.ro]
> Sent: Wednesday, June 10, 2009 2:17 PM
> To: leo at servion.com
> Cc: users at lists.opensips.org
> Subject: Re: [OpenSIPS-Users] help in configuring load balancer for 
> outbound dial
>
>  
>
> Hi Leo,
>
>  
>
> so shortly, your case is:
>
>  
>
> 1) you successfully do LB until all the destination are full (5 calls) 
> *-- yes*
>
> -> then load_balance() returns false in script -*--- yes*
>
>  
>
> 2) you do a lb_reload - what do you change in the table?  *I did not 
> change anything in the table. I simply issue lb_reload*
>
>  
>
> 3) you try do route call again and still fails ?   are the initial 5 
>    *only initial 5 calls work. After that all the call fails unless I 
> issue lb_reload from command line or restart opensips*.
>
> calls still going?  *We are evaluating opensips and I am responsible 
> for implementation/decision.*
>
>  
>
> Regards,
>
> Bogdan
>
>  
>
> Leo Thomas Selvaraj wrote:
>
> > 
>
> > Hi,
>
> > 
>
> > 
>
> > 
>
> > I had configured load balancer for outdialing. load_balancer table
>
> > information mentioned below.
>
> > 
>
> > 
>
> > 
>
> >  +----+----------+------------------+-----------+---------------+
>
> > 
>
> > 
>
> > 
>
> >  | id | group_id | dst_uri          | resources | description   |
>
> > 
>
> > 
>
> > 
>
> >  +----+----------+------------------+-----------+---------------+
>
> > 
>
> > 
>
> > 
>
> >  |  1 |        1 | sip:10.128.22.38 | pstn=2    | standby gw    |
>
> > 
>
> > 
>
> > 
>
> >  |  2 |        1 | sip:10.128.22.45 | pstn=3    | production gw |
>
> > 
>
> > 
>
> > 
>
> >  +----+----------+------------------+-----------+---------------+
>
> > 
>
> > 
>
> > 
>
> > The load balancer is working correctly for the first cycle, I try to
>
> > make five calls and it makes two calls to .38 gateway and then three
>
> > calls to .45 gateway. After completing one cycle the $du value is
>
> > setting as null if I try to make subsequent calls and the calls were
>
> > failing.  If I issue lb_reload using MI from command line  (
>
> > opensipsctl fifo lb_reload ) it starts again. I want this to run
>
> > continuously without issuing any MI commands.
>
> > 
>
> > 
>
> > 
>
> > From the logs I can see that $du is set to null. I am not sure whether
>
> > I am making any mistake.
>
> > 
>
> > 
>
> > 
>
> > I think something is wrong in setting the profile and fetching data
>
> > for the profile using get_profile_size in do_load_balancer function in
>
> > lb_data.c. The profile is getting set as *lbXpstn*, but when I tried
>
> > to print the value res[k]->profile it always displays a junk value.
>
> > 
>
> > 
>
> > 
>
> > Thanks,
>
> > 
>
> > *Leo Thomas Selvaraj*
>
> > 
>
> >  T: +1 609-987-0044 x 139 | F: +1 609-987-9787
>
> > 
>
> > ------------------------------------------------------------------------
>
> > 
>
> > cid:image001.gif at 01C97492.FCB6B790
>
> > 
>
> >  The information contained in this e-mail message or messages (which
>
> > includes any attachments) is confidential and may be legally
>
> > privileged. It is intended only for the use of the person or entity to
>
> > which it is addressed.
>
> > 
>
> > 
>
> > 
>
> > ------------------------------------------------------------------------
>
> > 
>
> > _______________________________________________
>
> > Users mailing list
>
> > Users at lists.opensips.org
>
> > http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
> >  
>
>  
>




More information about the Users mailing list