[OpenSIPS-Users] help in configuring load balancer for outbound dial

[Leo Thomas Selvaraj]

Bogdan,

 

Please find my response below in red.

 

Leo Thomas Selvaraj 

 T: +1 609-987-0044 x 139 | F: +1 609-987-9787

 

 

 The information contained in this e-mail message or messages (which
includes any attachments) is confidential and may be legally privileged. It
is intended only for the use of the person or entity to which it is
addressed.

 

 

-----Original Message-----
From: Bogdan-Andrei Iancu [mailto:bogdan at voice-system.ro] 
Sent: Wednesday, June 10, 2009 2:17 PM
To: leo at servion.com
Cc: users at lists.opensips.org
Subject: Re: [OpenSIPS-Users] help in configuring load balancer for outbound
dial

 

Hi Leo,

 

so shortly, your case is:

 

1) you successfully do LB until all the destination are full (5 calls) --
yes

-> then load_balance() returns false in script ---- yes

 

2) you do a lb_reload - what do you change in the table?  I did not change
anything in the table. I simply issue lb_reload

 

3) you try do route call again and still fails ?   are the initial 5    only
initial 5 calls work. After that all the call fails unless I issue lb_reload
from command line or restart opensips.

calls still going?  We are evaluating opensips and I am responsible for
implementation/decision.

 

Regards,

Bogdan

 

Leo Thomas Selvaraj wrote:

> 

> Hi,

> 

>  

> 

> I had configured load balancer for outdialing. load_balancer table 

> information mentioned below.

> 

>  

> 

>  +----+----------+------------------+-----------+---------------+

> 

>  

> 

>  | id | group_id | dst_uri          | resources | description   |

> 

>  

> 

>  +----+----------+------------------+-----------+---------------+

> 

>  

> 

>  |  1 |        1 | sip:10.128.22.38 | pstn=2    | standby gw    |

> 

>  

> 

>  |  2 |        1 | sip:10.128.22.45 | pstn=3    | production gw |

> 

>  

> 

>  +----+----------+------------------+-----------+---------------+

> 

>  

> 

> The load balancer is working correctly for the first cycle, I try to 

> make five calls and it makes two calls to .38 gateway and then three 

> calls to .45 gateway. After completing one cycle the $du value is 

> setting as null if I try to make subsequent calls and the calls were 

> failing.  If I issue lb_reload using MI from command line  ( 

> opensipsctl fifo lb_reload ) it starts again. I want this to run 

> continuously without issuing any MI commands.

> 

>  

> 

> From the logs I can see that $du is set to null. I am not sure whether 

> I am making any mistake.

> 

>  

> 

> I think something is wrong in setting the profile and fetching data 

> for the profile using get_profile_size in do_load_balancer function in 

> lb_data.c. The profile is getting set as *lbXpstn*, but when I tried 

> to print the value res[k]->profile it always displays a junk value.

> 

>  

> 

> Thanks,

> 

> *Leo Thomas Selvaraj* 

> 

>  T: +1 609-987-0044 x 139 | F: +1 609-987-9787

> 

> ------------------------------------------------------------------------

> 

> cid:image001.gif at 01C97492.FCB6B790

> 

>  The information contained in this e-mail message or messages (which 

> includes any attachments) is confidential and may be legally 

> privileged. It is intended only for the use of the person or entity to 

> which it is addressed.

> 

>  

> 

> ------------------------------------------------------------------------

> 

> _______________________________________________

> Users mailing list

> Users at lists.opensips.org

> http://lists.opensips.org/cgi-bin/mailman/listinfo/users

>   

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.opensips.org/pipermail/users/attachments/20090610/cffdd52d/attachment-0001.htm