[OpenSIPS-Users] FREERADIUS problem

[Bogdan-Andrei Iancu]

Hi,

the radius.conf is the cfg file for the radius server. What you need is 
the cfg file for the radius client - the radiusclient.conf.

Regards,
Bogdan

ASHWINI NAIDU wrote:
>
> hi,
>
> If you mean to see i have to do configurations in radiud.conf then 
> these are my configurations which r done
>
> prefix = /usr
> exec_prefix = /usr
> sysconfdir = /etc
> localstatedir = /var
> sbindir = ${exec_prefix}/sbin
> logdir = /var/log/freeradius
> raddbdir = /etc/freeradius
> radacctdir = ${logdir}/radacct
>
> #  Location of config and logfiles.
> confdir = ${raddbdir}
> run_dir = ${localstatedir}/run/freeradius
>
> bind_address = 192.168.1.120
> port = 0
>
>
> these are the settings done
>
> All the configurations in /etc/radiusclient-ng/ is done.
>
> where should i do the changes to correct theat error.
>
> On Fri, Jan 23, 2009 at 2:44 PM, Bogdan-Andrei Iancu 
> <bogdan at voice-system.ro <mailto:bogdan at voice-system.ro>> wrote:
>
>     Hi Ashwini,
>
>     You have to configure the accounting radius server in the
>     "radiusclient.conf" file - this may be (if using radiusclient-ng)
>     in /usr/local/etc/radiusclint-ng  or in /etc/radiusclient-ng. If
>     you compiled against the freeradius client, than check the
>     freeradius cfg dir.
>
>     Regards,
>     Bogdan
>
>     ASHWINI NAIDU wrote:
>
>         hi all,
>
>
>               I have freeradius-1.1.3 running on debain machine. i
>         have integrated it with openser-1.3.4. when i try to make a
>         call  i get the following errors
>
>         Jan 23 13:27:44 localhost /sbin/openser[9910]:
>         ERROR:acc:acc_rad_request: radius-ing failed
>         Jan 23 13:28:17 localhost /sbin/openser[9906]:*
>         rc_send_server: no reply from RADIUS server jp.local:1813*
>         Jan 23 13:28:17 localhost /sbin/openser[9906]:*
>         ERROR:acc:acc_rad_request: radius-ing failed*
>         Jan 23 13:29:29 localhost /sbin/openser[9913]:
>         ERROR:tm:w_t_relay: t_forward_nonack failed
>
>
>         myhostname is jp.
>
>         I wanted to know where i can set the ip address of the radius
>         server so that it can access the accounting server of freeradius.
>
>         -- 
>         Thankin You,
>         Ashwini BR Naidu
>         ------------------------------------------------------------------------
>
>         _______________________________________________
>         Users mailing list
>         Users at lists.opensips.org <mailto:Users at lists.opensips.org>
>         http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>          
>
>
>
>
>
> -- 
> Thankin You,
> Ashwini BR Naidu