[OpenSIPS-Users] SIP Trunking
Matthew S. Crocker
matthew at corp.crocker.com
Thu Aug 20 21:48:11 CEST 2009
Can mediaproxy glue two RTP streams together (CallerA to CallerB)?
Can mediaproxy glue two RTP streams together from different interfaces/IPs (eth0 & eth1) ?
If so then it should be able to glue two calls together between public IP (eth0) and private IP (eth1).
If the two RTP streams have to be on the same interface for mediaproxy to work then I would expect to run into issues.
EndUser <-> (eth0) MediaProxy (eth1) <-> SIP Gateway
----- "Jeff Pyle" <jpyle at fidelityvoice.com> wrote:
> From: "Jeff Pyle" <jpyle at fidelityvoice.com>
> To: "OpenSIPS users mailling list" <users at lists.opensips.org>
> Sent: Thursday, August 20, 2009 2:52:35 PM GMT -05:00 US/Canada Eastern
> Subject: Re: [OpenSIPS-Users] SIP Trunking
>
> Matthew,
>
> While I'm no Mediaproxy expert, I have seen many conversations on this
> list
> where Mediaproxy is described as a part of a far-end NAT solution. It
> was
> not designed to have a private IP attached to it. For that, you most
> likely
> will want to look at the rtpproxy application.
>
> It sounds like you are constructing a local ALG to connect private
> and
> public networks. You don't necessarily need a full-blown Acme for
> that.
> I've had great luck with Edgewater Networks' "Edgemarc" devices, for
> example. That's just one. There are many.
>
>
> - Jeff
>
>
>
> On 8/20/09 2:49 PM, "Matthew S. Crocker" <matthew at corp.crocker.com>
> wrote:
>
> >
> > I understand that OpenSIPS is not a full blown SBC (I can't afford
> an
> > ACMEPacket). Will it perform the functions to proxy the SIP & RTP
> streams
> > (via mediaproxy) between my end users and my internal gateway?
> >
> > At some point I plan on increasing the use of openSIPS to handle
> registration,
> > presence, routing, etc.
> >
> > -Matt
> >
> > ----- "Alex Balashov" <abalashov at evaristesys.com> wrote:
> >
> >> From: "Alex Balashov" <abalashov at evaristesys.com>
> >> To: "OpenSIPS users mailling list" <users at lists.opensips.org>
> >> Sent: Thursday, August 20, 2009 1:58:48 PM GMT -05:00 US/Canada
> Eastern
> >> Subject: Re: [OpenSIPS-Users] SIP Trunking
> >>
> >> Matthew,
> >>
> >> Look for the mediaproxy module.
> >>
> >> That said, do be aware that a proxy is, by definition, not like an
> >> SBC.
> >> SBCs have many other capabilities a proxy does not; a proxy is
> a
> >> relatively "thin" interoperation layer.
> >>
> >> Perhaps the recently introduced b2bua module is brought to bear on
> >> that
> >> somewhat, but classically, OpenSIPS is a proxy.
> >>
> >> -- Alex
> >>
> >> Matthew S. Crocker wrote:
> >>
> >>> Hello,
> >>>
> >>> I'm brand new to OpenSIPS, just going through the make process
> now.
> >>
> >>>
> >>> I need to configure OpenSIPS to act like a SBC for some SIP
> trunks
> >> coming off a VoIP switch. Where should I look for
> >> Documentation/Examples of a working config?
> >>>
> >>> Here is my scenario:
> >>>
> >>> OpenSIPS has two interfaces, private & public.
> >>> VoIP Gateway is on private LAN with no gateway configured (it can
> >> only talk to local machines, no routing)
> >>>
> >>> End user has an Asterisk server on a private lan behind their
> >> firewall (NAT)
> >>>
> >>> I need to configure OpenSIPS to listen for SIP messages on :5060
> >> from the end user firewall. It then need to rewrite the SIP
> message
> >> and send it to the Gateway. The Gateway would see the messages
> coming
> >> from the internal IP of the OpenSIPS server. Once all of the SIP
> >> messages get processed I then need the OpenSIPS server to proxy
> the
> >> RTP streams (plan on using mediaproxy) between the Asterisk server
> and
> >> VoIP Gateway.
> >>>
> >>> Any helpful hints on where to look?
> >>>
> >>> -Matt
> >>>
> >>>
> >>
> >>
> >> --
> >> Alex Balashov - Principal
> >> Evariste Systems
> >> Web : http://www.evaristesys.com/
> >> Tel : (+1) (678) 954-0670
> >> Direct : (+1) (678) 954-0671
> >>
> >> _______________________________________________
> >> Users mailing list
> >> Users at lists.opensips.org
> >> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
--
Matthew S. Crocker
President
Crocker Communications, Inc.
PO BOX 710
Greenfield, MA 01302-0710
http://www.crocker.com
P: 413-746-2760
More information about the Users
mailing list