[OpenSIPS-Devel] [ opensips-Bugs-3035600 ] usrloc:db_mode=2 causes register:max_contacts=1 to fail

Bogdan-Andrei Iancu bogdan at voice-system.ro
Sun Aug 1 23:21:20 CEST 2010


Hi Richard,

of course you can - "expires=0" is a special case (unregister) and does 
not fall under the "min_expires" test.

Regards,
Bogdan

Richard Revels wrote:
> Bogdan,
>
> With that configuration are you able to unregister by sending a register with expires set to zero?  I've been meaning to go back and test this but I have the impression you can't due to the proxy bumping it up to min expires. 
>
>
>
> Sent from my iPhone
>
> On Aug 1, 2010, at 2:43 PM, "SourceForge.net" <noreply at sourceforge.net> wrote:
>
>   
>> Bugs item #3035600, was opened at 2010-07-28 01:08
>> Message generated for change (Comment added) made by bogdan_iancu
>> You can respond by visiting: 
>> https://sourceforge.net/tracker/?func=detail&atid=1086410&aid=3035600&group_id=232389
>>
>> Please note that this message will contain a full copy of the comment thread,
>> including the initial issue submission, for this request,
>> not just the latest update.
>> Category: modules
>> Group: 1.6.x
>>     
>>> Status: Closed
>>> Resolution: Invalid
>>>       
>> Priority: 5
>> Private: No
>> Submitted By: takeshi (mayamatakeshi)
>>     
>>> Assigned to: Bogdan-Andrei Iancu (bogdan_iancu)
>>>       
>> Summary: usrloc:db_mode=2 causes register:max_contacts=1 to fail
>>
>> Initial Comment:
>> I'm testing with r. 7059 to confirm register:max_contacts=1 is always enforced (I'm using save("location", "f"'). If I set usrloc:db_mode=0, it seems to be working fine: I keep two terminal re-registering and I can see the contact of the most recent REGISTER always replaces the previous contact.
>> However, if I just set usrloc:db_mode=2, then this starts to fail and I can see 2 contacts present in both db and by querying contact info using fifo.
>> This is easily recreated by using 2 instances of SIPp to simulate 2 terminals.
>>
>>
>> ----------------------------------------------------------------------
>>
>>     
>>> Comment By: Bogdan-Andrei Iancu (bogdan_iancu)
>>>       
>> Date: 2010-08-01 21:43
>>
>> Message:
>> Just tested with the latest 1.6 SVN branch and it worked perfectly with the
>> following cfg:
>>
>> modparam("registrar", "max_contacts", 1)
>> modparam("registrar", "max_expires", 30)
>> modparam("registrar", "min_expires", 30)
>> modparam("registrar", "default_expires", 30)
>>
>> modparam("usrloc", "db_mode",   2)
>> modparam("usrloc", "cseq_delay",  10)
>> modparam("usrloc", "use_domain",   1)
>>
>> save("location","f");
>>
>>
>> I used 2 kphones with the same user to register.
>> Regards,
>> Bogdan
>>
>> ----------------------------------------------------------------------
>>
>> You can respond by visiting: 
>> https://sourceforge.net/tracker/?func=detail&atid=1086410&aid=3035600&group_id=232389
>>
>> _______________________________________________
>> Devel mailing list
>> Devel at lists.opensips.org
>> http://lists.opensips.org/cgi-bin/mailman/listinfo/devel
>>     
>
> _______________________________________________
> Devel mailing list
> Devel at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/devel
>
>   


-- 
Bogdan-Andrei Iancu
OpenSIPS Bootcamp
20 - 24 September 2010, Frankfurt, Germany
www.voice-system.ro




More information about the Devel mailing list