[OpenSIPS-Devel] [ opensips-Bugs-3035600 ] usrloc:db_mode=2 causes register:max_contacts=1 to fail
Richard Revels
rrevels at bandwidth.com
Sun Aug 1 22:47:22 CEST 2010
Bogdan,
With that configuration are you able to unregister by sending a register with expires set to zero? I've been meaning to go back and test this but I have the impression you can't due to the proxy bumping it up to min expires.
Sent from my iPhone
On Aug 1, 2010, at 2:43 PM, "SourceForge.net" <noreply at sourceforge.net> wrote:
> Bugs item #3035600, was opened at 2010-07-28 01:08
> Message generated for change (Comment added) made by bogdan_iancu
> You can respond by visiting:
> https://sourceforge.net/tracker/?func=detail&atid=1086410&aid=3035600&group_id=232389
>
> Please note that this message will contain a full copy of the comment thread,
> including the initial issue submission, for this request,
> not just the latest update.
> Category: modules
> Group: 1.6.x
>> Status: Closed
>> Resolution: Invalid
> Priority: 5
> Private: No
> Submitted By: takeshi (mayamatakeshi)
>> Assigned to: Bogdan-Andrei Iancu (bogdan_iancu)
> Summary: usrloc:db_mode=2 causes register:max_contacts=1 to fail
>
> Initial Comment:
> I'm testing with r. 7059 to confirm register:max_contacts=1 is always enforced (I'm using save("location", "f"'). If I set usrloc:db_mode=0, it seems to be working fine: I keep two terminal re-registering and I can see the contact of the most recent REGISTER always replaces the previous contact.
> However, if I just set usrloc:db_mode=2, then this starts to fail and I can see 2 contacts present in both db and by querying contact info using fifo.
> This is easily recreated by using 2 instances of SIPp to simulate 2 terminals.
>
>
> ----------------------------------------------------------------------
>
>> Comment By: Bogdan-Andrei Iancu (bogdan_iancu)
> Date: 2010-08-01 21:43
>
> Message:
> Just tested with the latest 1.6 SVN branch and it worked perfectly with the
> following cfg:
>
> modparam("registrar", "max_contacts", 1)
> modparam("registrar", "max_expires", 30)
> modparam("registrar", "min_expires", 30)
> modparam("registrar", "default_expires", 30)
>
> modparam("usrloc", "db_mode", 2)
> modparam("usrloc", "cseq_delay", 10)
> modparam("usrloc", "use_domain", 1)
>
> save("location","f");
>
>
> I used 2 kphones with the same user to register.
> Regards,
> Bogdan
>
> ----------------------------------------------------------------------
>
> You can respond by visiting:
> https://sourceforge.net/tracker/?func=detail&atid=1086410&aid=3035600&group_id=232389
>
> _______________________________________________
> Devel mailing list
> Devel at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/devel
More information about the Devel
mailing list