<div><p>Thank Mohammad,</p>
<p>really appriciated.<br>
waiting your script.</p>
<p>khaled chehab</p>
<p><font color ="#888888">Sent from my android device.</font></p>
<br/><br/>-----Original Message-----<br/>From: Muhammad Shahzad <shaheryarkh@googlemail.com><br/>To: OpenSIPS users mailling list <users@lists.opensips.org><br/>Sent: Sun, 18 Nov 2012 4:45 PM<br/>Subject: Re: [OpenSIPS-Users] calls have max call duration<br/><br/></div><p>humm, how can this be? It always works. Something is really weird going on <br>
in your opensips configuration. <br>
<br>
OK, let me prepare an alternative configuration for you and send you in 2-3 <br>
hours. <br>
<br>
BTW, you can call me Muhammad. <br>
<br>
Thank you. <br>
<br>
<br>
On Sun, Nov 18, 2012 at 12:34 AM, M. KHaled W. Chehab <br>
<<a href="mailto:kchehab@icucall.com">kchehab@icucall.com</a>>wrote: <br>
<br>
> dears, <br>
> <br>
> the mediaproxy timeout didnt.suceed any more ideas? <br>
> <br>
> Regards <br>
> <br>
> Sent from my android device. <br>
> <br>
> <br>
> <br>
> -----Original Message----- <br>
> From: "M.Khaled W Chehab" <<a href="mailto:kchehab@icucall.com">kchehab@icucall.com</a>> <br>
> To: 'OpenSIPS users mailling list' <<a href="mailto:users@lists.opensips.org">users@lists.opensips.org</a>> <br>
> Sent: Fri, 16 Nov <a href="tel:20125">2012 5</a>:18 PM <br>
> Subject: Re: [OpenSIPS-Users] calls have max call duration <br>
> <br>
> Dears,**** <br>
> <br>
> ** ** <br>
> <br>
> Thanks for your kindly reply, and I will try to arrange my opensips <br>
> configuration file and send it back if the media configuration didn’t <br>
> solve this problem ,**** <br>
> <br>
> BTW I am using a mix between a residential and trunking script ,do you <br>
> have a config tested having a permission ,routing dialplan module tested <br>
> for small carrier level ,you can send me a copy of it .**** <br>
> <br>
> **** <br>
> <br>
> My old config mediaproxy was **** <br>
> <br>
> stream_timeout = 90**** <br>
> <br>
> on_hold_timeout = 3540**** <br>
> <br>
> so set it now to **** <br>
> <br>
> stream_timeout = 30**** <br>
> <br>
> on_hold_timeout = 600**** <br>
> <br>
> ** ** <br>
> <br>
> I will monitor it now and inform you about the result , but my question <br>
> is ,is there a solution using signaling function I can implement ?**** <br>
> <br>
> ** ** <br>
> <br>
> ** ** <br>
> <br>
> Regards**** <br>
> <br>
> ** ** <br>
> <br>
> ** ** <br>
> <br>
> ** ** <br>
> <br>
> ** ** <br>
> <br>
> *From:* <a href="mailto:users-bounces@lists.opensips.org">users-bounces@lists.opensips.org</a> [mailto: <br>
> <a href="mailto:users-bounces@lists.opensips.org">users-bounces@lists.opensips.org</a>] *On Behalf Of *Muhammad Shahzad <br>
> *Sent:* Friday, November 16, <a href="tel:20125">2012 5</a>:01 PM <br>
> *To:* OpenSIPS users mailling list <br>
> *Subject:* Re: [OpenSIPS-Users] calls have max call duration**** <br>
> <br>
> ** ** <br>
> <br>
> Your opensips config is pretty messed up and hard to read. So, while i try <br>
> to read it to find the problem, as a workaround you should set RTP timeouts <br>
> in your mediaproxy configuration file (i.e. config.ini), e.g.**** <br>
> <br>
> ** ** <br>
> <br>
> stream_timeout = 30**** <br>
> <br>
> on_hold_timeout = 1800 <br>
> <br>
> This will result in automatic call hangup if there is no media for at <br>
> least 30 seconds. This will reduce wrong billing problem to 30 seconds, and <br>
> your customer's balance will not be exhausted completely. Similarly if call <br>
> is on hold for more then 30 minutes and no media is transferred during this <br>
> time (not even music on hold) then call will hangup (change this timeout to <br>
> whatever appropriate for you).**** <br>
> <br>
> ** ** <br>
> <br>
> Thank you.**** <br>
> <br>
> ** ** <br>
> <br>
> On Fri, Nov 16, 2012 at 2:13 PM, M.Khaled W Chehab <<a href="mailto:kchehab@icucall.com">kchehab@icucall.com</a>> <br>
> wrote:**** <br>
> <br>
> Dears,**** <br>
> <br>
> **** <br>
> <br>
> How to drop the call when a cancel received from UA and a 200 OK from <br>
> the trunk in the same second, note back the client cdr will be a canceled <br>
> call and the trunk cdr will be 1 sec duration but on my cdr its the max <br>
> daialog timeout duration**** <br>
> <br>
> **** <br>
> <br>
> I am searching for a solution for this since two weeks as I tried all <br>
> trick I know and all didn’t succeed ,**** <br>
> <br>
> Find attached the scenario I have problem with, which you can find it at <br>
> wireshark time line (<a href="tel:30877027">30.877027</a>) the Client with IP ( <a href="http://74.114.101.170">74.114.101.170</a>) <br>
> sends a cancel ,and the opensips version 1.8.2 server with IP <br>
> <a href="http://89.207.133.144">89.207.133.144</a> send the client 200 canceling and in its terms forward <br>
> the cancel to the trunk provider with IP <a href="http://74.114.101.190">74.114.101.190</a> ,but at <a href="tel:31015333">31.015333</a> <br>
> wireshark time line the trunk sends a 200 OK then 487 request terminated <br>
> and the billing stops from the trunk provider .**** <br>
> <br>
> The problem is my opensips with IP <a href="http://89.207.133.144">89.207.133.144</a> didn’t hangup the call <br>
> and go for the max call duration in the dialog module .**** <br>
> <br>
> -how to let opensips cancel the call immediately and stop it with no <br>
> billing .**** <br>
> <br>
> Please find attached my opensips.cfg configuration file **** <br>
> <br>
> **** <br>
> <br>
> Regards**** <br>
> <br>
> **** <br>
> <br>
> **** <br>
> <br>
> Khaled Chehab**** <br>
> <br>
> Senior NGN Engineer**** <br>
> <br>
> [image: Description: icucall]**** <br>
> <br>
> Operations Office - Lebanon**** <br>
> <br>
> Office : <a href="tel:+9611515155">+961 1 515155</a> ext 300**** <br>
> <br>
> Mobile : <a href="tel:+9613045212">+961 3 045212</a>**** <br>
> <br>
> E-mail : <a href="mailto:kchehab@icucall.com">kchehab@icucall.com</a>**** <br>
> <br>
> MSN ID :<a href="mailto:khalidchehab@hotmail.com">khalidchehab@hotmail.com</a> **** <br>
> <br>
> Skype : k_chehab **** <br>
> <br>
> Web Site: <a href="http://www.icucall.com">http://www.icucall.com</a>**** <br>
> <br>
> <a href="http://www.allohi.com">http://www.allohi.com</a>**** <br>
> <br>
> **** <br>
> <br>
> <br>
> _______________________________________________ <br>
> Users mailing list <br>
> <a href="mailto:Users@lists.opensips.org">Users@lists.opensips.org</a> <br>
> <a href="http://lists.opensips.org/cgi-bin/mailman/listinfo/users">http://lists.opensips.org/cgi-bin/mailman/listinfo/users</a>**** <br>
> <br>
<br>
</p>