Hi,
<br><br>I'm new to opensips, and I'm having trouble with dialogs created
from the load_balancing module not being removed upon receiving the BYE
when the call is terminated.
<br>I'm using opensips version 1.7.2 and have followed this example as well (<a href="http://www.opensips.org/Resources/DocsTutLoadbalancing" target="_top" rel="nofollow">http://www.opensips.org/Resources/DocsTutLoadbalancing</a><br>
).
<br><br>Currently I'm testing it on two sip phones which are registered
on the opensips SIP Router (at times I'm using one sip phone as both the
caller and callee, rewriting the destination uri (automatically done
through the load_balance() method) as my IP to route the call back to
the same sip phone). Either way the dialog is not destroyed on bye and
Wireshark output shows that I'm receiving the 200 OK to both sides and
the call gets cut without any problem.
<br><br>So, am I missing something on the config file ? Here's my config file....<br><br><u>opensips.cfg</u><br><br>####### Global Parameters #########
<br><br>debug=6
<br>log_stderror=yes
<br>log_facility=LOG_LOCAL0
<br><br>fork=yes
<br>children=4
<br><br>/* uncomment the following lines to enable debugging */
<br><br>/* uncomment the next line to disable TCP (default on) */
<br>#disable_tcp=yes
<br><br>/* uncomment the next line to enable the auto temporary blacklisting of
<br> not available destinations (default disabled) */
<br>#disable_dns_blacklist=no
<br><br>/* uncomment the next line to enable IPv6 lookup after IPv4 dns
<br> lookup failures (default disabled) */
<br>#dns_try_ipv6=yes
<br><br>/* uncomment the next line to disable the auto discovery of local aliases
<br> based on revers DNS on IPs (default on) */
<br>#auto_aliases=no
<br>/* uncomment the following lines to enable TLS support (default off) */
<br>#disable_tls = no
<br>#listen = tls:your_IP:5061
<br>#tls_verify_server = 1
<br>#tls_verify_client = 1
<br>#tls_require_client_certificate = 0
<br>#tls_method = TLSv1
<br>#tls_certificate = "//etc/opensips/tls/user/user-cert.pem"
<br>#tls_private_key = "//etc/opensips/tls/user/user-privkey.pem"
<br>#tls_ca_list = "//etc/opensips/tls/user/user-calist.pem"
<br><br>/* default db_url to be used by modules requiring DB connection;
<br> uncomment it if you use any module requiring DB connectivity */
<br>#db_default_url="mysql://opensips:opensipsrw@localhost/opensips"
<br><br><br>port=5060
<br><br>/* uncomment and configure the following line if you want opensips to
<br> bind on a specific interface/port/proto (default bind on all available) */
<br>#listen=udp:<a href="http://192.168.1.2:5060">192.168.1.2:5060</a>
<br>
<br><br><br><br>####### Modules Section ########
<br><br>#set module path
<br>mpath="//lib64/opensips/modules/"
<br><br>/* uncomment next line for MySQL DB support */
<br>loadmodule "db_mysql.so"
<br>loadmodule "signaling.so"
<br>loadmodule "sl.so"
<br>loadmodule "tm.so"
<br>loadmodule "rr.so"
<br>loadmodule "maxfwd.so"
<br>loadmodule "usrloc.so"
<br>loadmodule "registrar.so"
<br>loadmodule "textops.so"
<br>loadmodule "mi_fifo.so"
<br>loadmodule "uri.so"
<br>loadmodule "acc.so"
<br>loadmodule "avpops.so"
<br>loadmodule "dialog.so"
<br>loadmodule "load_balancer.so"
<br>/* uncomment next lines for MySQL based authentication support
<br> NOTE: a DB (like db_mysql) module must be also loaded */
<br>loadmodule "auth.so"
<br>loadmodule "auth_db.so"
<br>/* uncomment next line for aliases support
<br> NOTE: a DB (like db_mysql) module must be also loaded */
<br>#loadmodule "alias_db.so"
<br>/* uncomment next line for multi-domain support
<br> NOTE: a DB (like db_mysql) module must be also loaded
<br> NOTE: be sure and enable multi-domain support in all used modules
<br> (see "multi-module params" section ) */
<br>#loadmodule "domain.so"
<br>/* uncomment the next two lines for presence server support
<br> NOTE: a DB (like db_mysql) module must be also loaded */
<br>#loadmodule "presence.so"
<br>#loadmodule "presence_xml.so"
<br><br><br># ----------------- setting module-specific parameters ---------------
<br><br><br># ----- mi_fifo params -----
<br>modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo")
<br><br><br># ----- rr params -----
<br># do not append from tag to the RR (no need for this script)
<br>modparam("rr", "append_fromtag", 0)
<br><br><br># ----- registrar params -----
<br>/* uncomment the next line not to allow more than 10 contacts per AOR */
<br>#modparam("registrar", "max_contacts", 10)
<br># ----- usrloc params -----
<br>modparam("usrloc", "db_mode", 0)
<br>/* uncomment the following lines if you want to enable DB persistency
<br> for location entries */
<br>#modparam("usrloc", "db_mode", 2)
<br>#modparam("usrloc", "db_url",
<br># "mysql://opensips:opensipsrw@localhost/opensips")
<br><br><br># ----- uri params -----
<br>modparam("uri", "use_uri_table", 0)
<br><br><br># ----- acc params -----
<br>/* what sepcial events should be accounted ? */
<br>modparam("acc", "early_media", 1)
<br>modparam("acc", "report_cancels", 1)
<br>/* by default ww do not adjust the direct of the sequential requests.
<br> if you enable this parameter, be sure the enable "append_fromtag"
<br> in "rr" module */
<br>modparam("acc", "detect_direction", 0)
<br>/* account triggers (flags) */
<br>modparam("acc", "failed_transaction_flag", 3)
<br>modparam("acc", "log_flag", 1)
<br>modparam("acc", "log_missed_flag", 2)
<br>/* uncomment the following lines to enable DB accounting also */
<br>modparam("acc", "db_flag", 1)
<br>modparam("acc", "db_missed_flag", 2)
<br><br>#--------load_balance-------#
<br>modparam("load_balancer", "db_url","mysql://root:123@localhost/opensips")
<br><br>#---------Dialog-----------#
<br>#modparam("dialog", "dlg_flag", 13)
<br><br><br># ----- auth_db params -----
<br>/* uncomment the following lines if you want to enable the DB based
<br> authentication */
<br>#modparam("auth_db", "calculate_ha1", yes)
<br>#modparam("auth_db", "password_column", "password")
<br>modparam("auth_db", "db_url", "mysql://root:123@localhost/opensips")
<br>#modparam("auth_db", "load_credentials", "")
<br><br><br># ----- alias_db params -----
<br>/* uncomment the following lines if you want to enable the DB based
<br> aliases */
<br>#modparam("alias_db", "db_url",
<br># "mysql://opensips:opensipsrw@localhost/opensips")
<br><br><br># ----- domain params -----
<br>/* uncomment the following lines to enable multi-domain detection
<br> support */
<br>#modparam("domain", "db_url",
<br># "mysql://opensips:opensipsrw@localhost/opensips")
<br>#modparam("domain", "db_mode", 1) # Use caching
<br><br><br># ----- multi-module params -----
<br>/* uncomment the following line if you want to enable multi-domain support
<br> in the modules (dafault off) */
<br>#modparam("auth_db|usrloc|uri", "use_domain", 1)
<br><br><br># ----- presence params -----
<br>/* uncomment the following lines if you want to enable presence */
<br>#modparam("presence|presence_xml", "db_url",
<br># "mysql://opensips:opensipsrw@localhost/opensips")
<br>#modparam("presence_xml", "force_active", 1)
<br>#modparam("presence", "server_address", "sip:<a href="http://192.168.1.2:5060">192.168.1.2:5060</a>
<br>
<br>")
<br><br><br>####### Routing Logic ########
<br><br><br># main request routing logic
<br>route{
<br><br> log("\n\n\n----------------------------------------\n\n\n");
<br><br> if (!mf_process_maxfwd_header("10")) {
<br> sl_send_reply("483","Too Many Hops");
<br> exit;
<br> }
<br><br> if (has_totag()) {
<br> # sequential request withing a dialog should
<br> # take the path determined by record-routing
<br> if (loose_route()) {
<br> if (is_method("BYE")) {
<br> setflag(1); # do accounting ...
<br> setflag(3); # ... even if the transaction fails
<br> } else if (is_method("INVITE")) {
<br> # even if in most of the cases is useless, do RR for
<br> # re-INVITEs alos, as some buggy clients do change route set
<br> # during the dialog.
<br> record_route();
<br> }
<br> # route it out to whatever destination was set by loose_route()
<br> # in $du (destination URI).
<br> route(1);
<br> } else {
<br> /* uncomment the following lines if you want to enable presence */
<br> ##if (is_method("SUBSCRIBE") && $rd == "your.server.ip.address") {
<br> ## # in-dialog subscribe requests
<br> ## route(2);
<br> ## exit;
<br> ##}
<br> if ( is_method("ACK") ) {
<br> if ( t_check_trans() ) {
<br> # non loose-route, but stateful ACK; must be an ACK after
<br> # a 487 or e.g. 404 from upstream server
<br> t_relay();
<br> exit;
<br> } else {
<br> # ACK without matching transaction ->
<br> # ignore and discard
<br> exit;
<br> }
<br> }
<br> sl_send_reply("404","Not here");
<br> }
<br> exit;
<br> }
<br><br> #initial requests
<br><br> # CANCEL processing
<br> if (is_method("CANCEL"))
<br> {
<br> if (t_check_trans())
<br> t_relay();
<br> exit;
<br> }
<br><br> t_check_trans();
<br><br> # preloaded route checking
<br> if (loose_route()) {
<br> xlog("L_ERR",
<br> "Attempt to route with preloaded Route's [$fu/$tu/$ru/$ci]");
<br> if (!is_method("ACK"))
<br> sl_send_reply("403","Preload Route denied");
<br> exit;
<br> }
<br><br> # record routing
<br> if (!is_method("REGISTER|MESSAGE"))
<br> record_route();
<br><br> # account only INVITEs
<br> if (is_method("INVITE"))
<br> {
<br> append_hf("P-hint: outbound\r\n");
<br><br> log("\n\n\n----------INVITE----------\n\n\n");
<br> load_balance("1","A");
<br> if ($retcode<0)
<br> {
<br> sl_send_reply("500","Service full");
<br> exit;
<br> }
<br> record_route();
<br> route(1);
<br> }
<br><br> <br><br><br> if (is_method("PUBLISH"))
<br> {
<br> sl_send_reply("503", "Service Unavailable");
<br> exit;
<br> }
<br><br><br> if (is_method("REGISTER"))
<br> {
<br> log("\n\n\n----------------Register-----------------\n\n\n");
<br> <br> if (!save("location"))
<br> sl_reply_error();
<br><br> exit;
<br> }
<br><br> if ($rU==NULL) {
<br> # request with no Username in RURI
<br> sl_send_reply("484","Address Incomplete");
<br> exit;
<br> }
<br><br> # apply DB based aliases (uncomment to enable)
<br> ##alias_db_lookup("dbaliases");
<br><br> # do lookup with method filtering
<br> if (!lookup("location","m")) {
<br> switch ($retcode) {
<br> case -1:
<br> case -3:
<br> t_newtran();
<br> t_reply("404", "Not Found");
<br> exit;
<br> case -2:
<br> sl_send_reply("405", "Method Not Allowed");
<br> exit;
<br> }
<br> }
<br><br> # when routing via usrloc, log the missed calls also
<br> setflag(2);
<br><br> route(1);
<br>}
<br><br><br>route[1] {
<br> # for INVITEs enable some additional helper routes
<br> if (is_method("INVITE")) {
<br> t_on_branch("2");
<br> t_on_reply("2");
<br> t_on_failure("1");
<br> }
<br><br> if (!t_relay()) {
<br> sl_reply_error();
<br> };
<br> exit;
<br>}
<br>branch_route[2] {
<br> xlog("new branch at $ru\n");
<br>}
<br><br><br>onreply_route[2] {
<br> xlog("incoming reply\n");
<br>}
<br><br><br>failure_route[1] {
<br> if (t_was_cancelled()) {
<br> exit;
<br> }
<br>}<br><br>---------------<br><br>I could give you the opensips debug output as well but due to the message being too large I have excluded it... if need it please let me know and I will reply with it :)<br>