<span style="font-size: small;">Anyone can help me?<br /><br /><Hi all.<br /> </span><span style="font-size: small;"><I'm trying to use the Sip Trace tool of Opensips Control Panel.<br /> <I would only filter the traces of some users, and reading the siptrace module <documentation and of the related tool, I have noticed that this can be done using the <parameter traced_user_avp of the siptrace module and the field Traced User of the Sip <Trace tool. <br /><By controlling the table sip_trace in the database I have noticed two things: <br /> <1) some sip messages are stored twice. <br /> <2) not all messages have a value in the traced_user column. <br /> <<br /> <This is the opensips.cfg: <br /> <br /> ####### Global Parameters #########<br /> <br /> debug=3<br /> log_stderror=no<br /> log_facility=LOG_LOCAL0<br /> <br /> fork=yes<br /> children=4<br /> <br /> /* uncomment the following lines to enable debugging */<br /> #debug=6<br /> #fork=no<br /> #log_stderror=yes<br /> <br /> /* uncomment the next line to disable TCP (default on) */<br /> #disable_tcp=yes<br /> <br /> /* uncomment the next line to enable the auto temporary blacklisting of<br /> not available destinations (default disabled) */<br /> #disable_dns_blacklist=no<br /> <br /> /* uncomment the next line to enable IPv6 lookup after IPv4 dns<br /> lookup failures (default disabled) */<br /> #dns_try_ipv6=yes<br /> <br /> /* uncomment the next line to disable the auto discovery of local aliases<br /> based on revers DNS on IPs (default on) */<br /> #auto_aliases=no<br /> <br /> /* uncomment the following lines to enable TLS support (default off) */<br /> #disable_tls = no<br /> #listen = tls:your_IP:5061<br /> #tls_verify_server = 1<br /> #tls_verify_client = 1<br /> #tls_require_client_certificate = 0<br /> #tls_method = TLSv1<br /> #tls_certificate = "/usr/local/etc/opensips/tls/user/user-cert.pem"<br /> #tls_private_key = "/usr/local/etc/opensips/tls/user/user-privkey.pem"<br /> #tls_ca_list = "/usr/local/etc/opensips/tls/user/user-calist.pem"<br /> <br /> <br /> port=5060<br /> <br /> /* uncomment and configure the following line if you want opensips to<br /> bind on a specific interface/port/proto (default bind on all available) */<br /> listen=udp:10.10.45.146:5060<br /> <br /> <br /> ####### Modules Section ########<br /> <br /> #set module path<br /> mpath="/usr/local/lib/opensips/modules/"<br /> <br /> /* uncomment next line for MySQL DB support */<br /> loadmodule "db_mysql.so"<br /> loadmodule "sl.so"<br /> loadmodule "tm.so"<br /> loadmodule "rr.so"<br /> loadmodule "maxfwd.so"<br /> loadmodule "usrloc.so"<br /> loadmodule "registrar.so"<br /> loadmodule "textops.so"<br /> loadmodule "mi_fifo.so"<br /> loadmodule "uri_db.so"<br /> loadmodule "uri.so"<br /> loadmodule "xlog.so"<br /> loadmodule "acc.so"<br /> loadmodule "siptrace.so"<br /> loadmodule "avpops.so"<br /> <br /> /* uncomment next lines for MySQL based authentication support<br /> NOTE: a DB (like db_mysql) module must be also loaded */<br /> loadmodule "auth.so"<br /> loadmodule "auth_db.so"<br /> <br /> # ----------------- setting module-specific parameters ---------------<br /> <br /> # ----- mi_fifo params -----<br /> modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo")<br /> modparam("mi_fifo", "fifo_mode", 0666)<br /> <br /> # ----- rr params -----<br /> # add value to ;lr param to cope with most of the UAs<br /> modparam("rr", "enable_full_lr", 1)<br /> # do not append from tag to the RR (no need for this script)<br /> modparam("rr", "append_fromtag", 0)<br /> <br /> <br /> # ----- rr params -----<br /> modparam("registrar", "method_filtering", 1)<br /> /* uncomment the next line to disable parallel forking via location */<br /> # modparam("registrar", "append_branches", 0)<br /> /* uncomment the next line not to allow more than 10 contacts per AOR */<br /> #modparam("registrar", "max_contacts", 10)<br /> <br /> <br /> # ----- uri_db params -----<br /> /* by default we disable the DB support in the module as we do not need it<br /> in this configuration */<br /> modparam("uri_db", "use_uri_table", 0)<br /> modparam("uri_db", "db_url", "")<br /> <br /> <br /> # ----- acc params -----<br /> /* what sepcial events should be accounted ? */<br /> modparam("acc", "early_media", 1)<br /> modparam("acc", "report_ack", 1)<br /> modparam("acc", "report_cancels", 1)<br /> /* by default ww do not adjust the direct of the sequential requests.<br /> if you enable this parameter, be sure the enable "append_fromtag"<br /> in "rr" module */<br /> modparam("acc", "detect_direction", 0)<br /> /* account triggers (flags) */<br /> modparam("acc", "failed_transaction_flag", 3)<br /> modparam("acc", "log_flag", 1)<br /> modparam("acc", "log_missed_flag", 2)<br /> /* uncomment the following lines to enable DB accounting also */<br /> modparam("acc", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")<br /> modparam("acc", "db_flag", 1)<br /> modparam("acc", "db_missed_flag", 2)<br /> modparam("acc", "log_extra", "caller_id=$fu;callee_id=$ru;destination=$rd")<br /> modparam("acc", "db_extra", "caller_id=$fu;callee_id=$ru;destination=$rd")<br /> <br /> # ----- usrloc params -----<br /> #modparam("usrloc", "db_mode", 0)<br /> /* uncomment the following lines if you want to enable DB persistency<br /> for location entries */<br /> modparam("usrloc", "db_mode", 2)<br /> modparam("usrloc", "db_url",<br /> "mysql://opensips:opensipsrw@localhost/opensips")<br /> <br /> <br /> # ----- auth_db params -----<br /> /* uncomment the following lines if you want to enable the DB based<br /> authentication */<br /> modparam("auth_db", "calculate_ha1", yes)<br /> modparam("auth_db", "password_column", "password")<br /> modparam("auth_db", "db_url",<br /> "mysql://opensips:opensipsrw@localhost/opensips")<br /> modparam("auth_db", "load_credentials", "")<br /> <br /> <br /> # ----- siptrace params -----<br /> modparam("siptrace", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")<br /> modparam("siptrace", "trace_on", 1)<br /> modparam("siptrace", "table", "sip_trace")<br /> modparam("siptrace", "traced_user_avp", "$avp(s:user)")<br /> <br /> # -----xlog params -----<br /> modparam("xlog", "buf_size", 4096)<br /> modparam("xlog", "force_color", 0)<br /> <br /> # -----avpops params -----<br /> modparam("avpops", "avp_url", "mysql://opensips:opensipsrw@localhost/opensips")<br /> modparam("avpops","avp_table","usr_preferences")<br /> <br /> ####### Routing Logic ########<br /> <br /> <br /> # main request routing logic<br /> <br /> route{<br /> sip_trace();<br /> $avp(s:user)=$fu;<br /> xlog("L_INFO", "New request - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");<br /> <br /> if (!mf_process_maxfwd_header("10")) {<br /> xlog("L_INFO", "Too many hops\n");<br /> sl_send_reply("483","Too Many Hops");<br /> exit;<br /> }<br /> <br /> if (has_totag()) {<br /> # sequential request withing a dialog should<br /> # take the path determined by record-routing<br /> if (loose_route()) {<br /> if (is_method("BYE")) {<br /> <br /> setflag(1); # do accounting ...<br /> setflag(3); # ... even if the transaction fails<br /> <br /> }<br /> route(1);<br /> } else {<br /> /* uncomment the following lines if you want to enable presence */<br /> ##if (is_method("SUBSCRIBE") && $rd == "your.server.ip.address") {<br /> ## # in-dialog subscribe requests<br /> ## route(2);<br /> ## exit;<br /> ##}<br /> if ( is_method("ACK") ) {<br /> if ( t_check_trans() ) {<br /> # non loose-route, but stateful ACK; must be an ACK after a 487 or e.g. 404 from upstream server<br /> t_relay();<br /> exit;<br /> } else {<br /> # ACK without matching transaction ... ignore and discard.\n");<br /> exit;<br /> }<br /> }<br /> sl_send_reply("404","Not here");<br /> }<br /> exit;<br /> }<br /> <br /> #initial requests<br /> <br /> # CANCEL processing<br /> if (is_method("CANCEL"))<br /> {<br /> if (t_check_trans())<br /> t_relay();<br /> exit;<br /> }<br /> <br /> t_check_trans();<br /> <br /> # authenticate if from local subscriber (uncomment to enable auth)<br /> if (!(method=="REGISTER") && from_uri==myself)<br /> {<br /> if (!proxy_authorize("10.10.45.146", "subscriber")) {<br /> proxy_challenge("10.10.45.146", "0");<br /> exit;<br /> }<br /> if (!check_from()) {<br /> sl_send_reply("403","Forbidden auth ID");<br /> exit;<br /> }<br /> <br /> consume_credentials();<br /> # caller authenticated<br /> }<br /> <br /> # record routing<br /> if (!is_method("REGISTER|MESSAGE"))<br /> xlog("L_INFO", "Recording Route info\n");<br /> record_route();<br /> <br /> # account only INVITEs<br /> if (is_method("INVITE")) {<br /> xlog("L_INFO", "Method is an INVITE\n");<br /> setflag(1); # do accounting<br /> }<br /> if (!uri==myself)<br /> /* replace with following line if multi-domain support is used */<br /> ##if (!is_uri_host_local())<br /> {<br /> append_hf("P-hint: outbound\r\n");<br /> # if you have some interdomain connections via TLS<br /> ##if($rd=="tls_domain1.net") {<br /> ## t_relay("tls:domain1.net");<br /> ## exit;<br /> ##} else if($rd=="tls_domain2.net") {<br /> ## t_relay("tls:domain2.net");<br /> ## exit;<br /> ##}<br /> route(1);<br /> }<br /> <br /> # requests for my domain<br /> <br /> /* uncomment this if you want to enable presence server<br /> and comment the next 'if' block<br /> NOTE: uncomment also the definition of route[2] from below */<br /> ##if( is_method("PUBLISH|SUBSCRIBE"))<br /> ## route(2);<br /> <br /> if (is_method("PUBLISH"))<br /> {<br /> sl_send_reply("503", "Service Unavailable");<br /> exit;<br /> }<br /> <br /> <br /> if (is_method("REGISTER"))<br /> {<br /> xlog("L_INFO", "Method is an REGISTER\n");<br /> # authenticate the REGISTER requests (uncomment to enable auth)<br /> if (!www_authorize("10.10.45.146", "subscriber"))<br /> {<br /> www_challenge("10.10.45.146", "0");<br /> exit;<br /> }<br /> <br /> if (!check_to())<br /> {<br /> sl_send_reply("403","Forbidden auth ID");<br /> exit;<br /> }<br /> <br /> if (!save("location"))<br /> sl_reply_error();<br /> <br /> exit;<br /> }<br /> <br /> if ($rU==NULL) {<br /> # request with no Username in RURI<br /> sl_send_reply("484","Address Incomplete");<br /> exit;<br /> }<br /> <br /> # apply DB based aliases (uncomment to enable)<br /> ##alias_db_lookup("dbaliases");<br /> <br /> if (!lookup("location")) {<br /> switch ($retcode) {<br /> case -1:<br /> case -3:<br /> t_newtran();<br /> t_reply("404", "Not Found");<br /> exit;<br /> case -2:<br /> sl_send_reply("405", "Method Not Allowed");<br /> exit;<br /> }<br /> }<br /> <br /> # when routing via usrloc, log the missed calls also<br /> setflag(2);<br /> <br /> route(1);<br /> }<br /> <br /> <br /> route[1] {<br /> # for INVITEs enable some additional helper routes<br /> if (is_method("INVITE")) {<br /> t_on_branch("2");<br /> t_on_reply("2");<br /> t_on_failure("1");<br /> }<br /> <br /> if (!t_relay()) {<br /> sl_reply_error();<br /> };<br /> exit;<br /> }<br /> <br /> <br /> # Presence route<br /> /* uncomment the whole following route for enabling presence<br /> NOTE: do not forget to enable the call of this route from the main<br /> route */<br /> ##route[2]<br /> ##{<br /> ## if (!t_newtran())<br /> ## {<br /> ## sl_reply_error();<br /> ## exit;<br /> ## };<br /> ##<br /> ## if(is_method("PUBLISH"))<br /> ## {<br /> ## handle_publish();<br /> ## t_release();<br /> ## }<br /> ## else<br /> ## if( is_method("SUBSCRIBE"))<br /> ## {<br /> ## handle_subscribe();<br /> ## t_release();<br /> ## }<br /> ##<br /> ## exit;<br /> ##}<br /> <br /> <br /> branch_route[2] {<br /> xlog("new branch at $ru\n");<br /> }<br /> <br /> <br /> onreply_route[2] {<br /> sip_trace();<br /> xlog("incoming reply\n");<br /> }<br /> <br /> <br /> failure_route[1] {<br /> if (t_was_cancelled()) {<br /> exit;<br /> }<br /> <br /> # uncomment the following lines if you want to block client<br /> # redirect based on 3xx replies.<br /> ##if (t_check_status("3[0-9][0-9]")) {<br /> ##t_reply("404","Not found");<br /> ## exit;<br /> ##}<br /> <br /> # uncomment the following lines if you want to redirect the failed<br /> # calls to a different new destination<br /> ##if (t_check_status("486|408")) {<br /> ## sethostport("192.168.2.100:5060");<br /> ## append_branch();<br /> ## # do not set the missed call flag again<br /> ## t_relay();<br /> ##}<br /> }<br /> <br /> There is some error in the configuration? <br /> <br /> Thank you in advance.<br /><br />Marzuola Matteo</span> <br /><span style="font-size: small;"><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /></span>
<br>----------------------------------------------------------------------------<br>Vuoi essere presente online? <br>Vuoi dare voce alla tua attivita`? <br>Acquista un dominio su domini.interfree.it.<br>A partire da 18,59 euro<br>----------------------------------------------------------------------------<br>