[OpenSIPS-Users] Opensips is starting so many process un-necessarily .
Bogdan-Andrei Iancu
bogdan at opensips.org
Wed Jun 28 10:12:22 UTC 2023
In your configuration I see nothing that may degenerate into creating
additional procs (like exec module, auto_scaling, etc). And I assume you
have no traffic (SIP or MI) while you get this increasing number of
procs (basically opensips should be ideal), right ?
Regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
https://www.opensips-solutions.com
https://www.siphub.com
On 6/28/23 12:17 PM, Sasmita Panda wrote:
> centos9 :
> initially when running the config
> number of process : 22
> after 5/10min - number of process 169 . That increases gradually as
> well .
>
> centos8 :
> initially when running the config
> number of process : 22
> This is maintained throughout . It's not increasing at all .
>
>
> socket :
> socket=udp:ip:5505
> socket=udp:ip:5508
>
> This is configured in both the servers . Config is the same for both .
>
> config file : https://pastebin.com/huJ7yc4b
> <https://pastebin.com/huJ7yc4b>
>
>
> */Thanks & Regards/*
> /Sasmita Panda/
> /Senior Network Testing and Software Engineer/
> /3CLogic , ph:07827611765/
>
>
> On Wed, Jun 28, 2023 at 1:16 PM Bogdan-Andrei Iancu
> <bogdan at opensips.org <mailto:bogdan at opensips.org>> wrote:
>
> What is the socket and processes configuration you have in the cfg?
>
> How many procs are created at the end on the working centos8 ?
>
> Regards,
>
> Bogdan-Andrei Iancu
>
> OpenSIPS Founder and Developer
> https://www.opensips-solutions.com <https://www.opensips-solutions.com>
> https://www.siphub.com <https://www.siphub.com>
>
> On 6/28/23 9:52 AM, Sasmita Panda wrote:
>> I have installed opensips 3.2 on centos8 , which is working fine
>> without any error .
>>
>> Same code I have installed on centos9 latest version , here its
>> giving the above error . Same as aws ec2 instance and debian 11 .
>>
>> Is this because of the operating system?
>>
>>
>> */Thanks & Regards/*
>> /Sasmita Panda/
>> /Senior Network Testing and Software Engineer/
>> /3CLogic , ph:07827611765/
>>
>>
>> On Wed, Jun 28, 2023 at 10:07 AM Sasmita Panda
>> <spanda at 3clogic.com <mailto:spanda at 3clogic.com>> wrote:
>>
>> Yes , I knew that . But I have mentioned its not in the
>> starting . When I am starting opensips service everything is
>> fine and running properly .
>>
>> After sometime this error is comming when the number of
>> process increases which results more numbr of DB connection .
>> When the limit reaches that error is comming .
>> But this is happening in the run time . Not in the initial
>> stage .
>>
>> */Thanks & Regards/*
>> /Sasmita Panda/
>> /Senior Network Testing and Software Engineer/
>> /3CLogic , ph:07827611765/
>>
>>
>> On Tue, Jun 27, 2023 at 7:01 PM Bogdan-Andrei Iancu
>> <bogdan at opensips.org <mailto:bogdan at opensips.org>> wrote:
>>
>> The logs say your opensips fail to start a due to DB
>> issues : `ERROR:db_mysql:db_mysql_connect: driver
>> error(1040): Too many connections`
>>
>> Rule number one : *READ THE LOGS* !
>>
>> Regards,
>>
>> Bogdan-Andrei Iancu
>>
>> OpenSIPS Founder and Developer
>> https://www.opensips-solutions.com <https://www.opensips-solutions.com>
>> https://www.siphub.com <https://www.siphub.com>
>>
>> On 6/27/23 12:18 PM, Sasmita Panda wrote:
>>> No , I am running only 1 instance of opensips in one
>>> ec2-instance here .
>>>
>>> When I am starting Openisps .
>>> *ps -aef| grep opensips | wc -l * : this command output
>>> is *22 *
>>> *
>>> *
>>> /usr/local/bin/opensips-cli -x mi ps : Output of this
>>> command while starting .*
>>> *
>>> https://pastebin.com/H0yNeecA
>>> <https://pastebin.com/H0yNeecA>
>>> *
>>> *
>>> *After 5/10mins when I am running the same command :*
>>> *ps -aef| grep opensips | wc -l * : output is *169 *(its
>>> increasing gradually )*
>>> *
>>>
>>> And at that time eventually the fifo file is also
>>> getting deleted .
>>>
>>> As this increases , after sometime there are too many
>>> open connections with Mysql getting created and hence
>>> there are some errors as well for "too many open
>>> connections " .
>>>
>>> Below is the logs I am getting .
>>> https://pastebin.com/E6WxjeiC
>>> <https://pastebin.com/E6WxjeiC>
>>>
>>> At this point , my call is also not getting connected as
>>> the dynamic routing module is not getting initiated .
>>>
>>> I was about to upgrade my whole system to 3.2 and in the
>>> last stage I am facing this issue . Quit blocked here .
>>> From long time I am trying to debug this but not getting
>>> any hunch .
>>>
>>> Please help .
>>>
>>>
>>>
>>>
>>>
>>> */Thanks & Regards/*
>>> /Sasmita Panda/
>>> /Senior Network Testing and Software Engineer/
>>> /3CLogic , ph:07827611765/
>>>
>>>
>>> On Tue, Jun 27, 2023 at 2:16 PM Bogdan-Andrei Iancu
>>> <bogdan at opensips.org <mailto:bogdan at opensips.org>> wrote:
>>>
>>> Hi,
>>>
>>> Be sure you are not running multiple instance of
>>> OpenSIPS, fighting over the fifo file.
>>>
>>> Regards,
>>>
>>> Bogdan-Andrei Iancu
>>>
>>> OpenSIPS Founder and Developer
>>> https://www.opensips-solutions.com <https://www.opensips-solutions.com>
>>> https://www.siphub.com <https://www.siphub.com>
>>>
>>> On 6/27/23 11:00 AM, Sasmita Panda wrote:
>>>> Hi ,
>>>>
>>>> Initially when I am running the process I'm getting
>>>> the *opensips_fifo *file inside /*tmp *directory .
>>>>
>>>> But after some time that file is getting deleted
>>>> automatically and hence I am not able to run
>>>> opensips-cli command as well .
>>>>
>>>> What can be the reason ? Where do I start debugging ?
>>>>
>>>> */Thanks & Regards/*
>>>> /Sasmita Panda/
>>>> /Senior Network Testing and Software Engineer/
>>>> /3CLogic , ph:07827611765/
>>>>
>>>>
>>>> On Tue, Jun 6, 2023 at 2:10 PM Bogdan-Andrei Iancu
>>>> <bogdan at opensips.org <mailto:bogdan at opensips.org>>
>>>> wrote:
>>>>
>>>> Hi,
>>>>
>>>> Doing `opensips-cli -x mi ps` will list all the
>>>> opensips processes and their role within
>>>> OpenSIPS - this will help you understand the
>>>> overall set of procs.
>>>>
>>>> Regards,
>>>>
>>>> Bogdan-Andrei Iancu
>>>>
>>>> OpenSIPS Founder and Developer
>>>> https://www.opensips-solutions.com <https://www.opensips-solutions.com>
>>>> https://www.siphub.com <https://www.siphub.com>
>>>>
>>>> On 6/1/23 2:37 PM, Sasmita Panda wrote:
>>>>> In 3.2 I think we are not defining children
>>>>> per process . We have udp_worker or tcp_worker .
>>>>>
>>>>> log_level=4
>>>>> log_stderror=no
>>>>> log_facility=LOG_LOCAL5
>>>>>
>>>>> #udp_workers=4
>>>>> tcp_workers=2
>>>>>
>>>>> disable_dns_blacklist=yes
>>>>>
>>>>> This is my configuration .
>>>>>
>>>>> */
>>>>> /*
>>>>> */Thanks & Regards/*
>>>>> /Sasmita Panda/
>>>>> /Senior Network Testing and Software Engineer/
>>>>> /3CLogic , ph:07827611765/
>>>>>
>>>>>
>>>>> On Thu, Jun 1, 2023 at 4:53 PM Richard Robson
>>>>> <richard.robson at 8x8.com
>>>>> <mailto:richard.robson at 8x8.com>> wrote:
>>>>>
>>>>> How many children are defined in your
>>>>> script. You will get one process per child
>>>>>
>>>>> Richard
>>>>>
>>>>> On Thu, 1 Jun 2023, 11:47 Sasmita Panda,
>>>>> <spanda at 3clogic.com
>>>>> <mailto:spanda at 3clogic.com>> wrote:
>>>>>
>>>>> Hi All ,
>>>>>
>>>>>
>>>>> I am using opensips 3.2
>>>>> version: opensips 3.2.3 (x86_64/linux)
>>>>> flags: STATS: On, DISABLE_NAGLE,
>>>>> USE_MCAST, SHM_MMAP, PKG_MALLOC,
>>>>> Q_MALLOC, F_MALLOC, HP_MALLOC,
>>>>> DBG_MALLOC, FAST_LOCK-ADAPTIVE_WAIT
>>>>> ADAPTIVE_WAIT_LOOPS=1024,
>>>>> MAX_RECV_BUFFER_SIZE 262144,
>>>>> MAX_LISTEN 16, MAX_URI_SIZE 1024,
>>>>> BUF_SIZE 65535
>>>>> poll method support: poll, epoll,
>>>>> sigio_rt, select.
>>>>> svn revision: 3831:3864
>>>>> main.c compiled on 07:29:49 Jun 21
>>>>> 2022 with gcc 10
>>>>>
>>>>> When I am initially starting the
>>>>> service I am getting a single process
>>>>> running . After some time when I am
>>>>> checking there are so many processes
>>>>> running automatically . I have pasted
>>>>> the output of the below file .
>>>>>
>>>>> Please update here what's the reason
>>>>> behind this .
>>>>>
>>>>> https://pastebin.com/gu3Js6Fe
>>>>> <https://pastebin.com/gu3Js6Fe>
>>>>>
>>>>>
>>>>>
>>>>> */Thanks & Regards/*
>>>>> /Sasmita Panda/
>>>>> /Senior Network Testing and Software
>>>>> Engineer/
>>>>> /3CLogic , ph:07827611765/
>>>>> _______________________________________________
>>>>> Users mailing list
>>>>> Users at lists.opensips.org
>>>>> <mailto:Users at lists.opensips.org>
>>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>>> <http://lists.opensips.org/cgi-bin/mailman/listinfo/users>
>>>>>
>>>>> _______________________________________________
>>>>> Users mailing list
>>>>> Users at lists.opensips.org
>>>>> <mailto:Users at lists.opensips.org>
>>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>>> <http://lists.opensips.org/cgi-bin/mailman/listinfo/users>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Users mailing list
>>>>> Users at lists.opensips.org <mailto:Users at lists.opensips.org>
>>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users <http://lists.opensips.org/cgi-bin/mailman/listinfo/users>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20230628/98775c35/attachment-0001.html>
More information about the Users
mailing list