[OpenSIPS-Users] dynamic routing failover ONLY ONCE on the provider and continue
Bogdan-Andrei Iancu
bogdan at opensips.org
Wed Sep 7 06:34:23 UTC 2022
Hi Ben, David,
Yes, by default the module can use either the first-only GW, either all
the GWs from a carrier definition. But it cannot do the first 2. Still,
as Ben said, you can implement your logic at script level - loop on
"use_next_gw" until the carrier ID changes, so you can skip the GWs
after the first two.
Best regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
https://www.opensips-solutions.com
OpenSIPS Summit 27-30 Sept 2022, Athens
https://www.opensips.org/events/Summit-2022Athens/
On 9/6/22 7:35 PM, Ben Newlin wrote:
>
> Sorry, forgot the link for my reference.
>
> [1] -
> https://opensips.org/docs/modules/2.4.x/drouting.html#param_carrier_id_avp
> <https://opensips.org/docs/modules/2.4.x/drouting.html#param_carrier_id_avp>
>
> Ben Newlin
>
> *From: *Users <users-bounces at lists.opensips.org> on behalf of Ben
> Newlin <Ben.Newlin at genesys.com>
> *Date: *Tuesday, September 6, 2022 at 12:24 PM
> *To: *OpenSIPS users mailling list <users at lists.opensips.org>
> *Subject: *Re: [OpenSIPS-Users] dynamic routing failover ONLY ONCE on
> the provider and continue
>
> * EXTERNAL EMAIL - Please use caution with links and attachments *
>
> ------------------------------------------------------------------------
>
> Ah, I see now in my response I did misunderstand the problem.
>
> There is no use_next_carrier function, however the AVP that contains
> the carrier list is accessible to you [1]. Our implementation has a
> similar requirement that we should skip to the next carrier rather
> than next gateway on certain response codes.
>
> What we do is after calling do_routing, we copy the carrier_id_avp
> contents into our own AVP and then we call route_to_carrier on each
> carrier in that list. So then use_next_gw will only failover on the
> gateways on a specific carrier. When there are no more gateways, or
> whenever we decide based on our needs, then we can skip to the next
> carrier by calling route_to_carrier with the next carrier in our list.
>
> A use_next_carrier function does seem like a very useful feature
> enhancement though.
>
> Ben Newlin
>
> *From: *Users <users-bounces at lists.opensips.org> on behalf of David
> Villasmil <david.villasmil.work at gmail.com>
> *Date: *Tuesday, September 6, 2022 at 12:09 PM
> *To: *users at lists.opensips.org <users at lists.opensips.org>
> *Subject: *Re: [OpenSIPS-Users] dynamic routing failover ONLY ONCE on
> the provider and continue
>
> * EXTERNAL EMAIL - Please use caution with links and attachments *
>
> ------------------------------------------------------------------------
>
> Is there anything like “use_next_carrier”? I.e.: decide when I want to
> stop trying gws for the current carrier.
>
> On Tue, 6 Sep 2022 at 18:04, David Villasmil
> <david.villasmil.work at gmail.com
> <mailto:david.villasmil.work at gmail.com>> wrote:
>
> I may not have been clear, I want to try the first _two_ (2) gws
> for each carrier.
>
> Is this possible?
>
> On Tue, 6 Sep 2022 at 17:14, David Villasmil
> <david.villasmil.work at gmail.com
> <mailto:david.villasmil.work at gmail.com>> wrote:
>
> Hey Bodgan,
>
> Sorry for the caps, was just trying to illustrate a very
> important point.
>
> That was a typo: it's provider.
>
> So what i mean is:
>
> - Provier1
>
> - gw1
>
> - gw2
>
> - Provider2
>
> - gw1
>
> - gw2
>
> and so on.
>
> The providers could have more than 2 gws, but i only want it
> to attempt the first 2.
>
> Is this possible?
>
>
> Regards,
>
> David Villasmil
>
> email: david.villasmil.work at gmail.com
> <mailto:david.villasmil.work at gmail.com>
>
> phone: +34669448337
>
> On Tue, Sep 6, 2022 at 4:05 PM Bogdan-Andrei Iancu
> <bogdan at opensips.org <mailto:bogdan at opensips.org>> wrote:
>
> David,
>
> Define the "provide" as carrier and set the "use only
> first gw from cr" flag for it, see
> https://www.opensips.org/Documentation/Install-DBSchema-3-2#GEN-DB-DR-CARRIERS
> <https://www.opensips.org/Documentation/Install-DBSchema-3-2#GEN-DB-DR-CARRIERS>
>
> PS: no need for caps ;)
>
> Regards,
>
>
> Bogdan-Andrei Iancu
>
>
>
> OpenSIPS Founder and Developer
>
> https://www.opensips-solutions.com <https://www.opensips-solutions.com>
>
> OpenSIPS Summit 27-30 Sept 2022, Athens
>
> https://www.opensips.org/events/Summit-2022Athens/ <https://www.opensips.org/events/Summit-2022Athens/>
>
> On 9/6/22 4:57 PM, David Villasmil wrote:
>
> Hello folks,
>
> I'm trying to route to the first provider and if the
> first gw attempted fails, try the next gw on that
> provider, and if that fails THEN failover to the next
> provider. NOTE ALL PROVIDERS CAN HAVE MULTIPLE gws.
>
> Is this possible on 2.4.7?
>
> I really appreciate your help!
>
> David Villasmil
>
> email: david.villasmil.work at gmail.com
> <mailto:david.villasmil.work at gmail.com>
>
> phone: +34669448337
>
>
>
>
> _______________________________________________
>
> Users mailing list
>
> Users at lists.opensips.org <mailto:Users at lists.opensips.org>
>
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users <http://lists.opensips.org/cgi-bin/mailman/listinfo/users>
>
> --
>
> Regards,
>
> David Villasmil
>
> email: david.villasmil.work at gmail.com
> <mailto:david.villasmil.work at gmail.com>
>
> phone: +34669448337
>
> --
>
> Regards,
>
> David Villasmil
>
> email: david.villasmil.work at gmail.com
> <mailto:david.villasmil.work at gmail.com>
>
> phone: +34669448337
>
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20220907/2d275577/attachment-0001.html>
More information about the Users
mailing list