[OpenSIPS-Users] no TLS client domain found error

[Ahmed Rehan]

1. certificates must be in any subdir of /etc/opensips/tls/

2. it should be a real files, not symlinks.


Check these settings




On Wed, May 18, 2022 at 11:15 AM Bogdan-Andrei Iancu <bogdan at opensips.org>
wrote:

> Hi Jehanzaib,
>
> The sequence for the MST TLS domains is wrong.
>
> For each TLS domain block, you need to start only with a server_domain or
> client_domain - of course, different names. And for each domain you need
> you set the matching conditions. See
> https://opensips.org/html/docs/modules/3.2.x/tls_mgm.html#domains-param
>
> Basically something like:
>
> modparam("tls_mgm", "server_domain", "formsteams_server")
> modparam("tls_mgm", "match_ip_address", "[formsteams_server]....")
> modparam("tls_mgm", "match_sip_domain", "[formsteams_server]....")
> modparam("tls_mgm", "certificate", "[formsteams_server].....)
> ....
>
>
> modparam("tls_mgm", "client_domain", "formsteams_client")
> modparam("tls_mgm", "match_ip_address", "[formsteams_client]....")
> modparam("tls_mgm", "match_sip_domain", "[formsteams_client]....")
> modparam("tls_mgm", "certificate", "[formsteams_client].....)
> ....
>
>
> Best regards,
>
> Bogdan-Andrei Iancu
>
> OpenSIPS Founder and Developer
>   https://www.opensips-solutions.com
> OpenSIPS eBootcamp 23rd May - 3rd June 2022
>   https://opensips.org/training/OpenSIPS_eBootcamp_2022/
>
> On 5/18/22 2:38 AM, Jehanzaib Younis wrote:
>
> Hi Bogdan,
> That's the problem, when I try to add the client_domain I get an error.
> Actually, I have a working config for webrtc but now I am adding a new
> domain for MS teams direct route. In fact, any other domain gives an error.
> If I disable MS Teams domain, the opensips do not give an error message and
> my webrtc client can connect without any issue.
>
> loadmodule "tls_mgm.so"
> modparam("tls_mgm", "tls_library", "wolfssl")
>
> #### (WebRTC) Client
> modparam("tls_mgm", "server_domain", "sip.mywebphone.xx")
> modparam("tls_mgm", "certificate",
> "[sip.mywebphone.xx]/etc/letsencrypt/live/sip.mywebphone.xx/cert.pem")
> modparam("tls_mgm", "private_key",
> "[sip.mywebphone.xx]/etc/letsencrypt/live/sip.mywebphone.xx/privkey.pem")
> modparam("tls_mgm", "ca_list",
> "[sip.mywebphone.xx]/etc/letsencrypt/live/sip.mywebphone.xx/fullchain.pem")
> modparam("tls_mgm", "ca_dir",
> "[sip.mywebphone.xx]/etc/letsencrypt/live/sip.mywebphone.xx")
> modparam("tls_mgm", "tls_method", "[sip.mywebphone.xx]SSLv23")
> modparam("tls_mgm", "verify_cert", "[sip.mywebphone.xx]1")
> modparam("tls_mgm", "require_cert", "[sip.mywebphone.xx]1")
>
> ### This is for MS-Teams direct route
> modparam("tls_mgm", "server_domain", "dom1.formsteams.com")
> modparam("tls_mgm", "client_domain", "dom1.formsteams.com")
> modparam("tls_mgm", "certificate", "[dom1.formsteams.com
> ]/etc/letsencrypt/live/dom1.formsteams.com/cert.pem")
> modparam("tls_mgm", "private_key", "[dom1.formsteams.com
> ]/etc/letsencrypt/live/dom1.formsteams.com/privkey.pem")
> modparam("tls_mgm", "ca_list", "[dom1.formsteams.com
> ]/etc/letsencrypt/live/dom1.formsteams.com/fullchain.pem")
> modparam("tls_mgm", "ca_dir", "[dom1.formsteams.com]/etc/letsencrypt/live/
> dom1.formsteams.com")
> modparam("tls_mgm", "tls_method", "[dom1.formsteams.com]SSLv23")
> modparam("tls_mgm", "verify_cert", "[dom1.formsteams.com]1")
> modparam("tls_mgm", "require_cert", "[dom1.formsteams.com]1")
> modparam("tls_mgm", "client_sip_domain_avp", "tls_sip_dom")
>
> When i enable the MS-Teams direct route domain i get the below error:
> no certificate for tls domain ' dom1.formsteams.com ' defined
>
>
> Regards,
> Jehanzaib
>
>
> On Wed, May 18, 2022 at 3:04 AM Bogdan-Andrei Iancu <bogdan at opensips.org>
> wrote:
>
>> Hi Jehanzaib,
>>
>> What are the TLS client domains you have defined in your tls_mgm module ?
>>
>> Regards,
>>
>> Bogdan-Andrei Iancu
>>
>> OpenSIPS Founder and Developer
>>   https://www.opensips-solutions.com
>> OpenSIPS eBootcamp 23rd May - 3rd June 2022
>>   https://opensips.org/training/OpenSIPS_eBootcamp_2022/
>>
>> On 5/17/22 4:32 PM, Jehanzaib Younis wrote:
>>
>> Hi,
>>
>> I am having trouble to send/receive OPTIONS to ms teams.
>> Using the dispatcher module. The socket is defined as tls:*mysbcip*:5061
>> Looks like when my opensips (3.2.x) tries to send OPTIONS. it is giving
>> me the following error
>>
>> ERROR:proto_tls:proto_tls_conn_init: no TLS client domain found
>> ERROR:core:tcp_conn_create: failed to do proto 3 specific init for conn
>> 0x7f00ef2a85a0
>> ERROR:core:tcp_async_connect: tcp_conn_create failed
>> ERROR:proto_tls:proto_tls_send: async TCP connect failed
>> ERROR:tm:msg_send: send() to 52.114.76.76:5061 for proto tls/3 failed
>> ERROR:tm:t_uac: attempt to send to '
>> sip:sip3.pstnhub.microsoft.com:5061;transport:tls' failed
>>
>> I am setting the Contact as <sip:mytlsdomain:5061;transport=tls>
>>
>> Looks like the client domain is used for outgoing TLS connection but no
>> idea which domain i need to add here. The socket is my opensips ip address.
>>
>> Has anyone seen a similar kind of behaviour?
>>
>> Thank you.
>>
>> Regards,
>> Jehanzaib
>>
>> _______________________________________________
>> Users mailing listUsers at lists.opensips.orghttp://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>>
>>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>


-- 
Regards
Ahmed Rehan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20220518/ff4f7921/attachment-0001.html>