[OpenSIPS-Users] UDP fragmentation in reply routes
junkmail
junkmail at djrance.com
Thu May 21 05:38:52 EST 2020
Yea that is it.
so if you are doing something like tcpdump udp port 5060 or udp port
5080 etc. you would have to change it to the specific host IP that you
are testing with.
so more like tcpdump host 10.1.1.1 or something like that to make sure
that you see all the traffic. Or I am sure there is a way to tell
TCPdump to capture fragments but I am a bit too lazy to look it up. But
that was why I was not seeing the fragments.
20.05.2020 15:46 に Maxim Sobolev さんは書きました:
> Olle, this is what he has been warning you about. See, the
> fragmentation is done at IP level, so that if your UDP packet gets
> fragmented, only the first fragment is going to contain a UDP header
> with a port number. Therefore, if you are using a port number(s) as a
> capture filter with your tcpdump then you won't see those subsequent
> fragment(s). You should be using IP with destination address as a
> filter for example and not UDP with a port number(s). Or combine udp
> rule with rule that would only match IP fragment(s).
>
> -Max
>
> On Wed, May 20, 2020 at 12:57 PM Olle Frimanson <olle at zaark.com>
> wrote:
>
>> Hi thanks for the tip, how dit you find it? I just capture 3 ports
>> in my tcpdump.
>>
>> Br Olle
>>
>> Skickat från min iPhone
>>
>>> 20 maj 2020 kl. 19:18 skrev junkmail <junkmail at djrance.com>:
>>>
>>> Sorry that is what I was trying to let you know. Is that I had
>> thought the same thing that the Fragment was not even sent, but it
>> was just because of the tcpdump filter I had not that it actually
>> wasn't being sent. If you have not try capturing all IP traffic to
>> a host IP and see if you see it.
>>>
>>>
>>> 20.05.2020 11:11 に Olle Frimanson さんは書きました:
>>>> Hi the issue on my side is that it’s not the network that is
>> the
>>>> problem the second fragment is not even sent. I also kind on lean
>> to
>>>> TCP at the moment but it would be good to get a comment from
>> Opensips
>>>> team on this if and how they setup the sockets and if there is a
>>>> difference on different routes
>>>> Br Olle
>>>> Skickat från min iPhone
>>>>>> 20 maj 2020 kl. 17:14 skrev junkmail <junkmail at djrance.com>:
>>>>> Hello, I had run into the same issue. One thing I was a bit
>> mistaken because I was using tcpdump and doing a capture filter of
>> port 5060 or the such. So I was missing the Fragment in my sniff as
>> it does not include the UDP header. Just something to be aware of.
>> But I was having problems specifically traffic inside of GCP <
>> google cloud. As well as traffic traversing the VPN to GCP. I am
>> not certain about what changed for internal to GCP but that started
>> working and now the only thing using TCP is over VPNs. Sorry not a
>> lot of information here. but my best guess is either the
>> firewall/router on my side or Googles is dropping the UDP fragment.
>> I didn't dig into it much further as TCP fixed the issue and this
>> was just a transit between opensisps systems.
>>>>> 19.05.2020 01:21 に olle at zaark.com さんは書きました:
>>>>>> Hi, this happens one single opensips instance server it
>> receives the
>>>>>> inbound packet fine, then when its send out on the same
>> interface
>>>>>> it’s fragmented, so I don’t think it’s network or router
>> switch
>>>>>> related. Have seen such problems in the past in virtual
>> environments
>>>>>> but this is not the case now.
>>>>>> My prime suspect is Centos since it send out the first part of
>> the
>>>>>> fragmented packet but not the following part that would
>> complete the
>>>>>> packet.
>>>>>> But indeed it is a strange bug, since it does not always
>> happen.
>>>>>> BR/Olle
>>>>>> FRÅN: Users <users-bounces at lists.opensips.org> FÖR Giovanni
>>>>>> Maruzzelli
>>>>>> SKICKAT: den 19 maj 2020 09:13
>>>>>> TILL: OpenSIPS users mailling list <users at lists.opensips.org>
>>>>>> ÄMNE: Re: [OpenSIPS-Users] UDP fragmentation in reply routes
>>>>>> Can be a problem of the virtual env, and/or the
>> router/switch...
>>>>>> Try substitute real hardware to virtual, and different models
>> of
>>>>>> router/switch
>>>>>> In a LAN, UDP fragmentation is not supposed to be a problem at
>> all...
>>>>>> answered from mobile, please pardon terseness and typos,
>>>>>> -giovanni
>>>>>>> On Tue, May 19, 2020, 08:05 <olle at zaark.com> wrote:
>>>>>>> Thanks for the reply Max,
>>>>>>> we are doing all we can to make the packets smaller, but
>> before we
>>>>>>> move over to TCP, which is most likely our next step, I wanted
>> to
>>>>>>> explore what could be happening.
>>>>>>> AFAIK the application have some control of this since these
>> are
>>>>>>> parameters that partly can be set when you open a socket,
>> that’s
>>>>>>> why I wonders if Opensips might use those parameters or not,
>>>>>>> especially since we have so very different behaviour in
>> different
>>>>>>> directions.
>>>>>>> BR/Olle
>>>>>>> FRÅN: Users <users-bounces at lists.opensips.org> FÖR Maxim
>> Sobolev
>>>>>>> SKICKAT: den 18 maj 2020 22:03
>>>>>>> TILL: OpenSIPS users mailling list <Users at lists.opensips.org>
>>>>>>> ÄMNE: Re: [OpenSIPS-Users] UDP fragmentation in reply routes
>>>>>>> Smells like a OS/kernel bug to me. There is little application
>> can
>>>>>>> do in that regard, UDP fragmentation/reassembly happens at
>> much
>>>>>>> lower layers of the OSI stack.
>>>>>>> However, as a workaround as long as SIP goes you can try to
>> reduce
>>>>>>> your SIP signalling packet size by using compact version of
>> SIP
>>>>>>> headers, as well as dropping headers that are not used. That
>> would
>>>>>>> save you 100-150 bytes per SIP message perhaps. I don't know
>> if
>>>>>>> OpenSIP can do that in the proxy mode out of the box though,
>> so you
>>>>>>> might want to add b2b into the flow.
>>>>>>> -Max
>>>>>>> On Mon., May 18, 2020, 12:34 p.m. Olle Frimanson,
>> <olle at zaark.com>
>>>>>>> wrote:
>>>>>>>> Hi,
>>>>>>>> We have an issue on our home proxy (opensips 2.4.6), when it
>>>>>>>> receives 200 OK (over UDP) from our Freeswitch and the
>> package
>>>>>>>> size is higher than the MTU size , we sometimes get
>> fragmentation
>>>>>>>> of the UDP packets, but only the first part of the fragmented
>>>>>>>> package is sent to our edge proxy. Is this a known issue or
>> is it
>>>>>>>> a OS bug?
>>>>>>>> We have not yet spotted any pattern on this and in most cases
>>>>>>>> bigger packets with MTU around 1600 bytes gets through
>> without an
>>>>>>>> issue.
>>>>>>>> I can add that in the other direction in the normal request
>> routes
>>>>>>>> we don’t have any issue at all can have packets > 2000
>> bytes
>>>>>>>> without any issues.
>>>>>>>> Does Opensips use IP_MTU_DISCOVER or how is fragmentation
>>>>>>>> controlled and is it expected to have different behavior in
>> reply
>>>>>>>> routes vs other routes?
>>>>>>>> We use Centos 7 in a virtual server environment.
>>>>>>>> I was hoping someone can share some light on this strange
>> issue.
>>>>>>>> BR/Olle
>>>>>>>> _______________________________________________
>>>>>>>> Users mailing list
>>>>>>>> Users at lists.opensips.org
>>>>>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>>>>> _______________________________________________
>>>>>>> Users mailing list
>>>>>>> Users at lists.opensips.org
>>>>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>>>> _______________________________________________
>>>>>> Users mailing list
>>>>>> Users at lists.opensips.org
>>>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>>> _______________________________________________
>>>>> Users mailing list
>>>>> Users at lists.opensips.org
>>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users at lists.opensips.org
>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>> _______________________________________________
>> Users mailing list
>> Users at lists.opensips.org
>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
More information about the Users
mailing list