[OpenSIPS-Users] mid_registrar not updating exipres when receiving 200 ok
Liviu Chircu
liviu at opensips.org
Thu Sep 20 10:09:14 EDT 2018
Hi Dominic,
The 200 OK returned by OpenSIPS should definitely contain a 120s expiry
time. Thanks for the detailed explanation - I will look into this asap.
Best regards,
Liviu Chircu
OpenSIPS Developer
http://www.opensips-solutions.com
On 20.09.2018 16:29, Dominic wrote:
> Hi all, I have the following setup:
> -sip device is registering to OpenSIPS setup as a mid_registrar who
> then fowards registers to asterisk once they are authenticated
> -OpenSIPS is setup in contact throttling mode with outgoing expires
> set to 3600 sec.
>
> The scenario I came accross is the following:
>
> "Registration - OpenSips mid_registrar"
>
> ┌─┐
> ║"│
> └┬┘
> ┌┼┐
> │ ┌────────┐ ┌────────┐
> ┌┴┐ │OpenSips│ │Asterisk│
> Alice └────────┘ └────────┘
> │REGISTER (expires 3600 sec)│ │
> │───────────────────────────> │
> │ │ │
> │ 401 Unauthorized │ │
> │<─────────────────────────── │
> │ │ │
> │REGISTER (expires 3600 sec)│ │
> │───────────────────────────> │
> │ │ │
> │ │ REGISTER (expires 3600 sec)│
> │ │ ───────────────────────────>
> │ │ │
> │ │ 200 OK (expires 120 sec) │
> │ │ <───────────────────────────
> │ │ │
> │ 200 OK (expires 3600 sec) │ │
> │<─────────────────────────── │
> │ │ │
> │ │ │
> │ │ │
> │ │ │
> Alice ┌────────┐ ┌────────┐
> ┌─┐ │OpenSips│ │Asterisk│
> ║"│ └────────┘ └────────┘
> └┬┘
> ┌┼┐
> │
> ┌┴┐
>
> 1-the sip device sends a REGISTER to OpenSIPS (expires 3600)
> 2-OpenSIPS authentifies the REGISTER and sends back challenge to the
> sip device
> 3-sip devices sends authenticated REGISTER to OpenSIPS, here the
> expires would normally be changed to 3600 but in this case it was
> already set at 3600.
> 4-Asterisk receives the REGISTER, alters the expires to 120secs and
> replies 200 ok to OpenSIPS
> 5-OpenSIPS forwards the 200 ok but with 3600 sec expires.
>
> My Questions is:
> I was expecting OpenSIPS to automatically update the expires in it's
> usrloc to 120 seconds and send 120 sec in its 200 ok. Should I be
> doing something in a return route for the REGISTERs in order to update
> that and send the correct value or should opensips be doing that
> automatically? Currently I am calling mid_registrar_save("location")
> when I receive the REGISTER but doing nothing when I receive the 200 ok.
>
> Thanks in advance
> Dominic
>
>
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20180920/c1af14aa/attachment-0001.html>
More information about the Users
mailing list