[OpenSIPS-Users] [15066] WARNING:rr:after_strict: no socket found to match RR [1][XXX.XXX.XXX.XXX:5060]

[Bogdan-Andrei Iancu]

Yes, the chain is: carrier -> LB -> B2B -> Asterisk. And when Asterisk 
generates an REFER (for call transfer) , the REFER will be received by 
B2B which will handle it (it will generate a new call leg) without 
changing anything on the leg connecting the b2b to the carrier.

Regards,

Bogdan-Andrei Iancu

OpenSIPS Founder and Developer
   http://www.opensips-solutions.com
OpenSIPS Summit 2018
   http://www.opensips.org/events/Summit-2018Amsterdam

On 02/12/2018 04:41 PM, Brian Southworth wrote:
>
> Hi Bogan,
>
> Thanks for the reply, so are you saying the load balancer will send 
> the call over to the B2B and then to asterisk ?
>
> Again sorry for my lack of knowledge there is still a lot I don’t 
> understand or know.
>
> Regards,
>
> Brian Southworth
>
> Communications Developer
>
> *From:*Bogdan-Andrei Iancu [mailto:bogdan at opensips.org]
> *Sent:* 12 February 2018 14:23
> *To:* Brian Southworth <brian.southworth at clocom.uk>; OpenSIPS users 
> mailling list <users at lists.opensips.org>
> *Subject:* Re: [OpenSIPS-Users] [15066] WARNING:rr:after_strict: no 
> socket found to match RR [1][XXX.XXX.XXX.XXX:5060]
>
> Hi Brian,
>
> In this case, I guess that the OPenSIPS B2B (handling the REFER) 
> should sit between the OpenSIPS LB and Asterisk - again , this is the 
> case only if the result of the transfer is a call to an Asterisk box 
> too. If the call may be redirected back to a carrier, the OpenSIPS B2B 
> should sit in front of the LB.
>
> Regards,
>
> Bogdan-Andrei Iancu
> OpenSIPS Founder and Developer
>    http://www.opensips-solutions.com
> OpenSIPS Summit 2018
>    http://www.opensips.org/events/Summit-2018Amsterdam
>
> On 02/07/2018 03:38 PM, Brian Southworth wrote:
>
>     Opensips handles the refer sending it to the asterisk box
>
>     Regards,
>
>     Brian Southworth
>
>     Communications Developer
>
>
>
>     111 Wilmslow Road
>
>     Handforth
>
>     Wilmslow
>
>     SK9 3ER
>
>     T: 03333 446677
>
>     W: www.clocom.uk <http://www.clocom.uk/>__
>
>
>     	
>     	
>
>     	
>
>     	
>
>     __
>
>     *From:*Bogdan-Andrei Iancu [mailto:bogdan at opensips.org]
>     *Sent:* 07 February 2018 11:36
>     *To:* Brian Southworth <brian.southworth at clocom.uk>
>     <mailto:brian.southworth at clocom.uk>; OpenSIPS users mailling list
>     <users at lists.opensips.org> <mailto:users at lists.opensips.org>
>     *Subject:* Re: [OpenSIPS-Users] [15066] WARNING:rr:after_strict:
>     no socket found to match RR [1][XXX.XXX.XXX.XXX:5060]
>
>     So the target of the refer is to another Asterisk or may be also
>     back to the carrier ?
>
>
>
>     Bogdan-Andrei Iancu
>
>       
>
>     OpenSIPS Founder and Developer
>
>        http://www.opensips-solutions.com
>
>     OpenSIPS Summit 2018
>
>        http://www.opensips.org/events/Summit-2018Amsterdam
>
>     On 02/07/2018 01:32 PM, Brian Southworth wrote:
>
>         Hi Bogdan,
>
>         The Cisco phone, generates the refer once you press the xfer
>         button when inside a call.
>
>         Caller àopensipsàasteriskàCarrier
>
>         (cisco)
>
>         Regards,
>
>         Brian Southworth
>
>         T: 03333 446677
>
>         W: www.clocom.uk <http://www.clocom.uk/>__
>
>
>         	
>         	
>         	
>         	
>
>         	
>         	
>         	
>         	
>
>         	
>         	
>         	
>
>         	
>
>         *From:*Bogdan-Andrei Iancu [mailto:bogdan at opensips.org]
>         *Sent:* 07 February 2018 09:38
>         *To:* Brian Southworth <brian.southworth at clocom.uk>
>         <mailto:brian.southworth at clocom.uk>; OpenSIPS users mailling
>         list <users at lists.opensips.org> <mailto:users at lists.opensips.org>
>         *Subject:* Re: [OpenSIPS-Users] [15066]
>         WARNING:rr:after_strict: no socket found to match RR
>         [1][XXX.XXX.XXX.XXX:5060]
>
>         Hi Brian,
>
>         Which party is generating the REFER ? the asterisk boxes from
>         behind the LB ? or the carrier side ?
>
>         and yes, see you in Amsterdam !!
>
>         Regards,
>
>
>
>         Bogdan-Andrei Iancu
>
>           
>
>         OpenSIPS Founder and Developer
>
>            http://www.opensips-solutions.com
>
>         OpenSIPS Summit 2018
>
>            http://www.opensips.org/events/Summit-2018Amsterdam
>
>         On 02/05/2018 05:52 PM, Brian Southworth wrote:
>
>             I think I get it now thank you Bogdan.
>
>             So I would forward the traffic using the opensips proxy,
>             using the if (is_method(“refer”)) to the opensips box that
>             would be the B2BUA? To bridge the call ?.
>
>             Also look forward to Opensips summit in may 😊ill see you
>             all there got it booked Saturday 😊
>
>             Regards,
>
>             Brian Southworth
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20180212/c5509aea/attachment-0001.html>