[OpenSIPS-Users] R: Issues running opensips with load balancer.
Bogdan-Andrei Iancu
bogdan at opensips.org
Mon May 15 04:38:06 EDT 2017
Hi,
Could you give some details about you inability of compiling 2.3 ??
Regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com
OpenSIPS Summit May 2017 Amsterdam
http://www.opensips.org/events/Summit-2017Amsterdam.html
On 05/15/2017 05:31 AM, Ravitez Ravi wrote:
> Hi Michele,
> Good Day,
> Im unable to compile 2.3 in RHL 6.5
> so got back to 1.9.
>
> Regards,
> Ravitez.D
>
> On Sun, May 14, 2017 at 7:42 AM, michele.pinassi
> <michele.pinassi at unisi.it <mailto:michele.pinassi at unisi.it>> wrote:
>
> Hi Ravi, there's any special reason not to choose latest 2.3 or,
> if you need 1.11 series, 1.11.9 ?
>
> Also i suggest to choose a Debian 8 instead of RHel.
>
> Michele
>
>
> Inviato da smartphone Samsung Galaxy.
>
> -------- Messaggio originale --------
> Da: Ravitez Ravi <ravitez.dondeti at gmail.com
> <mailto:ravitez.dondeti at gmail.com>>
> Data: 13/05/17 23:01 (GMT+01:00)
> A: OpenSIPS users mailling list <users at lists.opensips.org
> <mailto:users at lists.opensips.org>>
> Oggetto: [OpenSIPS-Users] Issues running opensips with load balancer.
>
> Hi All,
>
> I’m trying to run opensips with load balancer module but it fails
> to come up. Below are details of what I have done and been trying.
> My questions are in */bold italics and highlighted in yellow/*.
> Request you to take a look and help.
>
> *_Objective:_* Install OpenSIPS 1.11.10 with TLS on RHEL 6.5 for
> load balancing SIP traffic
>
> *_Procedure followed:_*
>
> 1.Download and install OpenSIPS1.11.10 on RHEL 6.5 with default
> configuration:
>
> a.Downloaded
> http://opensips.org/pub/opensips/1.11.10/opensips-1.11.10-tls.tar.gz
> <http://opensips.org/pub/opensips/1.11.10/opensips-1.11.10-tls.tar.gz>
>
> b.Un-tar and un-zip the downloaded file
>
> c.Go to opensips-1.11.10-tls folder, ran make menuconfig, select
> Compile And Install OpenSIPS and followed by Exit & Save All Changes
>
> d.Run opensips on command line, ensure the opensips process is
> running using ‘ps -ef | grep opensips’ command and stop the
> process using ‘killall opensips’
>
> 2.Get necessary dependencies straightened out for load balancer as
> mentioned in section 1.4 in
> http://www.opensips.org/html/docs/modules/1.11.x/load_balancer.html
> <http://www.opensips.org/html/docs/modules/1.11.x/load_balancer.html>
>
> a.The section lists the following OpenSIPS modules: i) /Dialog/ –
> Dialog module, ii) /Dialog/ – TM module, iii) /database/ – one of
> the DB modules.
>
> b.I did not see any specific dialog module either in Configure
> Compile Flags or Configure Excluded Modules, however, I could see
> /usr/local/lib64/opensips/modules/dialog.so and assumed this is
> the intended module. */Not sure if it covers both Dialog and TM.
> Please clarify./*
>
> c.I selected db_mysql from Configure Excluded Modules and got a
> message “You have enabled the 'db_mysql' module, so please install
> ' development libraries of mysql-client , typically
> libmysqlclient-dev'” while saving. I could not find the RPM for
> RHEL. The closed I could find is
> libmysqlclient16-devel-5.1.69-1.w6.x86_64.rpm which fails to get
> installed. */Am I in right path here? Please advise./*
>
> d.I was following an example mentioned section 3.2 in
> http://www.opensips.org/Documentation/Tutorials-LoadBalancing
> <http://www.opensips.org/Documentation/Tutorials-LoadBalancing>.
>
> The section shows following modules to be loaded:
>
> loadmodule "modules/maxfwd/maxfwd.so"
>
> loadmodule "modules/sl/sl.so"
>
> loadmodule "modules/db_mysql/db_mysql.so"
>
> loadmodule "modules/tm/tm.so"
>
> loadmodule "modules/xlog/xlog.so"
>
> loadmodule "modules/uri/uri.so"
>
> loadmodule "modules/rr/rr.so"
>
> loadmodule "modules/dialog/dialog.so"
>
> loadmodule "modules/mi_fifo/mi_fifo.so"
>
> loadmodule "modules/mi_xmlrpc/mi_xmlrpc.so"
>
> loadmodule "modules/signaling/signaling.so"
>
> loadmodule "modules/textops/textops.so"
>
> loadmodule "modules/load_balancer/load_balancer.so"
>
> However, the sub-directories mentioned in above list is not seen
> on my file system after OpenSIPS installation, yet I see some of
> the above list shared libraries under
> /usr/local/lib64/opensips/modules. */Hope this is ok./*
>
> e.The defaults opensips.cfg provided includes most of the above
> listed modules, but the below libraries were missing which are
> needed for load balancer:
>
> loadmodule "modules/dialog.so"
>
> loadmodule "modules/textops.so"
>
> loadmodule "modules/load_balancer/load_balancer.so"
>
> loadmodule "modules/db_mysql/db_mysql.so"
>
> loadmodule "modules/xlog/xlog.so"
>
> loadmodule "modules/mi_xmlrpc/mi_xmlrpc.so
>
> I was able to successfully start opensips after loading dialog.so
> and textops.so, however, opensips refuses to start when I load
> load_balancer.so with following error:
>
> May 13 16:40:18 kuat opensips: INFO:core:shm_mem_init: allocating
> SHM block
>
> May 13 16:40:18 kuat opensips[22969]: NOTICE:core:main: version:
> opensips 1.11.10-tls (x86_64/linux)
>
> May 13 16:40:18 kuat opensips[22969]: INFO:core:main: using 32 Mb
> shared memory
>
> May 13 16:40:18 kuat opensips[22969]: INFO:core:main: using 2 Mb
> private memory per process
>
> May 13 16:40:18 kuat opensips[22969]: INFO:core:evi_publish_event:
> Registered event <E_CORE_THRESHOLD(0)>
>
> May 13 16:40:18 kuat opensips[22969]: INFO:core:evi_publish_event:
> Registered event <E_CORE_SHM_THRESHOLD(1)>
>
> May 13 16:40:18 kuat opensips[22969]: INFO:core:evi_publish_event:
> Registered event <E_CORE_PKG_THRESHOLD(2)>
>
> May 13 16:40:18 kuat opensips[22969]: NOTICE:signaling:mod_init:
> initializing module ...
>
> May 13 16:40:18 kuat opensips[22969]: INFO:sl:mod_init:
> Initializing StateLess engine
>
> May 13 16:40:18 kuat opensips[22969]: INFO:tm:mod_init: TM -
> initializing...
>
> May 13 16:40:18 kuat opensips[22969]: INFO:rr:mod_init: rr -
> initializing
>
> May 13 16:40:18 kuat opensips[22969]: INFO:maxfwd:mod_init:
> initializing...
>
> May 13 16:40:18 kuat opensips[22969]: INFO:sipmsgops:mod_init:
> initializing...
>
> May 13 16:40:18 kuat opensips[22969]: INFO:usrloc:ul_init_locks:
> locks array size 512
>
> May 13 16:40:18 kuat opensips[22969]: INFO:core:evi_publish_event:
> Registered event <E_UL_AOR_INSERT(3)>
>
> May 13 16:40:18 kuat opensips[22969]: INFO:core:evi_publish_event:
> Registered event <E_UL_AOR_DELETE(4)>
>
> May 13 16:40:18 kuat opensips[22969]: INFO:registrar:mod_init:
> initializing...
>
> May 13 16:40:18 kuat opensips[22969]: INFO:acc:mod_init:
> initializing...
>
> May 13 16:40:18 kuat opensips[22969]: INFO:core:evi_publish_event:
> Registered event <E_ACC_EVENT(5)>
>
> May 13 16:40:18 kuat opensips[22969]: INFO:core:evi_publish_event:
> Registered event <E_ACC_CDR(6)>
>
> May 13 16:40:18 kuat opensips[22969]: INFO:core:evi_publish_event:
> Registered event <E_ACC_MISSED_EVENT(7)>
>
> May 13 16:40:18 kuat opensips[22969]: INFO:dialog:mod_init: Dialog
> module - initializing
>
> May 13 16:40:18 kuat opensips[22969]: INFO:textops:mod_init:
> initializing...
>
> May 13 16:40:18 kuat opensips[22969]: INFO:load_balancer:mod_init:
> Load-Balancer module - initializing
>
> *May 13 16:40:18 kuat opensips[22969]:
> ERROR:load_balancer:mod_init: DB URL is not defined!*
>
> *May 13 16:40:18 kuat opensips[22969]: ERROR:core:init_mod: failed
> to initialize module load_balancer*
>
> *May 13 16:40:18 kuat opensips[22969]: ERROR:core:main: error
> while initializing modules*
>
> May 13 16:40:18 kuat opensips[22969]: INFO:core:cleanup: cleanup
>
> May 13 16:40:18 kuat opensips: INFO:core:daemonize: pre-daemon
> process exiting with -1
>
> */Looks like this is due to DB module. Is this correct?/*
>
> f.I do not see following shared libraries. */Please let me know
> which modules should I load to get them./*
>
> loadmodule "modules/db_mysql/db_mysql.so"
>
> loadmodule "modules/xlog/xlog.so"
>
> loadmodule "modules/mi_xmlrpc/mi_xmlrpc.so"
>
>
> Thank you :)
>
>
> Regards,
>
> Ravitez.D
>
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org <mailto:Users at lists.opensips.org>
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
> <http://lists.opensips.org/cgi-bin/mailman/listinfo/users>
>
>
>
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20170515/4fef3986/attachment-0001.html>
More information about the Users
mailing list