[OpenSIPS-Users] radius accounting, Acct-Status-Type = 0

[Miha]

ok, then i will use this value and on radius side i will catch it and 
set to internally to STOP if this is only soluton.

The thing is when 486/busy comes, opensips sends this broken radius 
accouting request and radius server does not replay to it and that is 
why the opensips waits almost 40s to send back ACK on 486.


Or is there any other solution?


br
miha

On 17/01/2017 09:27, Ionut Ionita wrote:
> No, thank you it's fine now. That value was for testing purposes only, 
> you can remove it now.
> OpenSIPS it's using *Failed* value for *Acct-Status-Type* which is not 
> defined anywhere (nor in
> our dictionary, nor in any RFC or somewhere else). Not finding that 
> value results in having *0
> *for *Acct-Status-Type*, the value you were seeing before. Will let 
> you know when we'll decide
> how we should fix this issue.
>
> Regards,
> Ionut Ionita
> OpenSIPS Developer
> On 01/17/2017 09:38 AM, Miha wrote:
>> Hi Ionut
>>
>> do I need on bouth sides or opensips side?
>>
>> I can see that now i get:  Acct-Status-Type = Modem-Start in radius.
>>
>>
>> br
>> miha
>>
>> On 16/01/2017 16:45, Ionut Ionita wrote:
>>>
>>> Hi Miha,
>>>
>>>     Can you set in your radius dictionary file where the 
>>> *Acct-Status-Type* values are defined
>>>
>>> VALUE    Acct-Status-Type    Start›  ›   ›   1
>>> VALUE    Acct-Status-Type    Stop›   ›   ›   2
>>> VALUE    Acct-Status-Type    Alive›  ›   ›   3
>>> VALUE    Acct-Status-Type    Accounting-On›  › 7
>>> VALUE    Acct-Status-Type    Accounting-Off› ›   8
>>>
>>> the following line, just below the others:
>>>
>>> VALUE    Acct-Status-Type    Failed        4
>>>
>>> and then check if you'll see *4 *instead of *0* for *Acct-Status-Type*?
>>>
>>> It seems that opensips it's using a value that's not in the radius 
>>> dictionary, *Failed* value.
>>>
>>>
>>> Ionut Ionita
>>> OpenSIPS Developer
>>> On 01/16/2017 04:05 PM, Miha wrote:
>>>> Hello
>>>>
>>>> how can i define that for 486/busy opensips will send 
>>>> Acct-Status-Type = 2 to radius server?
>>>> Acct-Status-Type = 0 it not like standard thing and it should not 
>>>> be send :)
>>>>
>>>>
>>>> I imported dictinary.opensips and .sip.
>>>>
>>>>
>>>> tnx
>>>> miha
>>>>
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users at lists.opensips.org
>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>
>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users at lists.opensips.org
>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users at lists.opensips.org
>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20170117/1fbba989/attachment.html>