[OpenSIPS-Users] 2.2.x and CP with json

[Bogdan-Andrei Iancu]

Hi Jeff,

just ignore them - you are probably using some older version of gcc (do 
gcc -v) that is wrongly detects just cases.

Regards,

Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com

On 02/24/2017 09:14 PM, Jeff Wilkie wrote:
> Compiling the 2.2.3, I'm seeing several warnings of similar type below:
>
> lookup.c: In function ‘is_contact_registered’:
>
> lookup.c:559: warning: ‘callid.len’ may be used uninitialized in this 
> function
>
> lookup.c:559: warning: ‘callid.s’ may be used uninitialized in this 
> function
>
>
> dlg_replication.c: In function ‘dlg_replicated_profiles’:
>
> dlg_replication.c:838: warning: ‘old_name.s’ may be used uninitialized 
> in this function
>
> dlg_replication.c:838: warning: ‘old_name.len’ may be used 
> uninitialized in this function
>
>
> Is this anything to worry about?
>
>
> Jeff Wilkie
>
>
> On Fri, Feb 24, 2017 at 12:21 PM, Jeff Wilkie <jwilkie at usipcom.com 
> <mailto:jwilkie at usipcom.com>> wrote:
>
>     Thanks Bogdan,  I will dl 2.2.3 and retest.  This error occurred
>     on the following BTW
>
>     Array
>     (
>          [Server] => OpenSIPS (2.3.0-dev (x86_64/linux))
>     )
>
>
>     Jeff Wilkie
>
>     On Fri, Feb 24, 2017 at 4:46 AM, Bogdan-Andrei Iancu
>     <bogdan at opensips.org <mailto:bogdan at opensips.org>> wrote:
>
>         Hi Jeff,
>
>         There was an issue on how the MI output of the address_dump
>         was formated when using JSON. This issue was leading to an
>         invalid JSON being returned. And CP was dropping the returned
>         JSON as not able being able to parse it. If you do the direct
>         web query, there is nothing to parse/validate the JSON, so it
>         is displayed.
>
>         The issue was fixed in latest 2.2, so please grab the 2.2.3
>         and give it a try please.
>
>         Best regards,
>
>         Bogdan-Andrei Iancu
>         OpenSIPS Founder and Developer
>         http://www.opensips-solutions.com
>         <http://www.opensips-solutions.com>
>
>         On 02/22/2017 08:24 PM, Jeff Wilkie wrote:
>>         Ok, question part 2, now that the proper module is loaded :)
>>          From the MI interface in CP, I have 1 small issue. Using
>>         json to interface with opensips, I execute the command
>>         "*address_dump" *and execute.  I receive the output of
>>         address dump**  |  son:127.0.0.1:8888/json
>>         <http://127.0.0.1:8888/json>Successfully executed, no output
>>         generated.  Other commands like domain_dump work as expected
>>         in the SYSTEM/MI interface.  If I bypass CP and use web
>>         direct command 127.0.0.1:8888/json/address_dump
>>         <http://127.0.0.1:8888/json/address_dump> I receive the
>>         proper output.  Not sure why CP provides no output from this
>>         command though.
>>         The web query directly looks like this as a response when not
>>         using MI via CP
>>         http://10.10.20.229:8888/json/address_dump
>>         <http://10.10.20.229:8888/json/address_dump>
>>         {"part": [{"value":"default", "children":{"dest": [{"value":"	   8 <10.10.10.99,2, 5060, 1, NULL, 1515599999>"}, {"value":"	  19 <10.10.20.193,2, 5060, 1, NULL, 1515599999>"}, {"value":"	  81 <192.168.1.203,1, 5060, 1, NULL, NULL>"}]}}]}
>>         It's not a show stopper but bugging me why it doesn't work
>>         for that command only from what I can tell from initial testing.
>>         Jeff Wilkie
>>
>>             Yes, you did overlook to load the dialplan module into
>>             your OpenSIPS (the dp_reload command is prvided by this
>>             modules). Regards,
>>
>>             Bogdan-Andrei Iancu
>>             OpenSIPS Founder and Developer
>>             http://www.opensips-solutions.com
>>             <http://www.opensips-solutions.com>
>>
>>             On 02/22/2017 05:56 PM, Jeff Wilkie wrote:
>>>             When using the mi_json module combined with CP, it
>>>             appears that not all of the functions were ported over
>>>             for this interaction to complete 100%.  JSON enabled
>>>             in opensips-cp/config/boxes.gl
>>>             <http://boxes.gl>obal.inc.php only allows some commands
>>>             to work.  One particular command that appears to not be
>>>             working is under SYSTEM/DIALPLAN of CP when you attempt
>>>             to hit "apply to server".  I receive a Sending to
>>>             *json:127.0.0.1:8888/json
>>>             <http://127.0.0.1:8888/json>* : Error code 500 (Command
>>>             not found) for the dp_reload command.  If I do the same
>>>             thing under the SYSTEM/PERMISSIONS page "apply to
>>>             server" returns success for address_reload.   Is this a
>>>             known issue? Did I overlook something small in the
>>>             config?  How do I remedy this issue?
>>>             Thanks
>>>             Jeff Wilkie
>>>
>>>             _______________________________________________
>>>             Users mailing list
>>>             Users at lists.opensips.org <mailto:Users at lists.opensips.org>
>>>             http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>             <http://lists.opensips.org/cgi-bin/mailman/listinfo/users>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20170227/ebad19cf/attachment.html>