[OpenSIPS-Users] BYE - 404 not here
ahmeddd
lamiriahmedamin at gmail.com
Thu Aug 17 05:10:24 EDT 2017
Hi,
I'm trying to establish a voice call between two IP phones over opensips 2.2
as a server.
I have two IP phones and I have already installed opensips in my VM, and I
want to route calls between those two IP phones.
that mean how to enable the trunk between two different IP
phones and a simple softphone which should be registered to my opensips
proxy !! should I do
somethig special to register them ! or should I specify the domain :( VM1 :
x.x.13.87 and VM2 x.x.13.82 ) and for my opensips server (x.x.15.18) ! or
it's the same domain as x.x.15.18 !!
I have defined one domain which is the opensips server domain (x.x.15.18)
and I created the two local users ( VM1: test1 at 10.42.15.18 ==> 666, VM2 :
test2 at 10.42.15.18 ==>9000 )
When I try to call from a softphone one of the ip phones, it doesn't work..
can any one help me !
I got always 404 user not found and even not reachable!!
below the routing config :
route{
setflag(22);
sip_trace();
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
exit;
}
if (has_totag()) {
# sequential request withing a dialog should
# take the path determined by record-routing
if (loose_route()) {
# validate the sequential request against dialog
if ( $DLG_status!=NULL && !validate_dialog() ) {
xlog("In-Dialog $rm from $si (callid=$ci) is
not valid according to dialog\n");
xlog("this is the source IP $si and this is
the SIP request's method $rm : \n " );
## exit;
}
if (is_method("BYE")) {
setflag(ACC_DO); # do accounting ...
setflag(ACC_FAILED); # ... even if the
transaction fails
} else if (is_method("INVITE")) {
# even if in most of the cases is useless, do
RR for
# re-INVITEs alos, as some buggy clients do
change route set
# during the dialog.
record_route();
}
# route it out to whatever destination was set by
loose_route()
# in $du (destination URI).
route(relay);
} else if ( is_method("ACK") ) {
if ( t_check_trans() ) {
# non loose-route, but stateful ACK;
must be an ACK after
# a 487 or e.g. 404 from upstream
server
t_relay();
exit;
} else {
# ACK without matching transaction ->
# ignore and discard
exit;
}
sl_send_reply("404","Not here");
}
exit;
}
# preloaded route checking
if (loose_route()) {
xlog("L_ERR",
"Attempt to route with preloaded Route's
[$fu/$tu/$ru/$ci]");
if (!is_method("ACK"))
sl_send_reply("403","Preload Route denied");
exit;
}
if (!uri==myself) {
append_hf("P-hint: outbound\r\n");
route(1);
}
# requests for my domain
if (is_method("PUBLISH|SUBSCRIBE"))
{
sl_send_reply("503", "Service Unavailable");
exit;
}
#Register Method
if (is_method("REGISTER"))
xlog("**'******** REGISTER ********************");
xlog("request URI ===> $ruri");
xlog("source IP $si \n " );
xlog("destination URI = $du \n");
xlog("calling user: $tU \n");
xlog("reference to URI of 'To' header ====> $tu");
xlog("reference to domain in URI of 'To' header ====>
$td");
xlog("request user rU = $rU \n");
xlog("from value = $from \n");
xlog("To header: $tu \n");
xlog("requested direction = $rd");
xlog("requested port = $rp ");
xlog("user :: $avp(aor) registered the a new contact");
#if ( 0 ) setflag(7);
if (!save("location"))
sl_reply_error();
#save location added
save("location");
exit;
}
if ($rU==NULL) {
# request with no Username in RURI
sl_send_reply("484","Address Incomplete");
exit;
}
# do lookup with method filtering
if (!lookup("location","m")) {
t_newtran();
t_reply("404", "Not Found");
exit;
}
xlog("******************************************* SIP TRUNKING
********************************************************");
# If requested URI is one of the two VMs : 666 or 9000
if ($tU=~"666") {
xlog("Detecting destination from number 666: to test8s2");
$du = "sip:10.42.13.82:5060";
#replace the domain part of RURI to point to test8s2 or test8s7
rewriteuri("sip:666 at 10.42.13.82:5060");
xlog("request user rU = $rU \n");
rewritehostport("10.42.13.82:5060");
# route the call out based on RURI
route(1);
}
# all numbers starting with 90 number are to be sent to test8s2 and
test8s7
if ($tU=~"9000"){
xlog("Detecting destination from number: to test8s7");
#replace the domain part of RURI to point to test8s2 or test8s7
strip(1);
$du="sip:10.42.13.87:5060";
rewritehostport("10.42.13.87:5060");
#route the call out based on RURI
route(1);
}
# CANCEL processing
if (is_method("CANCEL"))
{
if (t_check_trans())
t_relay();
exit;
}
t_check_trans();
# load balancing detect resources and do balancing
if ($tU=~"666" || $ruri=~"sip:10.42.15.18;Transport=TCP") {
# xlog(" $rm from $si , ruri=$ru", "me");
forward("10.42.13.82:5060");
rewriteuri("sip:test8s2 at 10.42.13.82");
xlog("requested URI = $rU ");
# looks like a call to test8s2
load_balance("2","VM");
xlog("load balancing destination URI verified : $du");
route(1);
}
else if ($tU=~"9000" || $ruri=~"sip:10.42.15.18;Transport=TCP") {
forward("10.42.13.87:5060");
rewriteuri("sip:test8s7 at 10.42.13.87");
# looks like a call to test8s7
load_balance("2","VM");
xlog("load balancing: dest Uri = $du");
route(1);
}
# for non-REGISTER requests
if ( !(is_method("REGISTER") ) ) {
if (from_uri==myself){
} else {
# if caller is not local, then called number must be
local
# here we nust route the call !!!!!!!
if (!uri==myself) {
send_reply("403","Rely forbidden");
exit;
}
}
save("location");
#save any message even it is not a register request
}
# preloaded route checking
if (loose_route()) {
xlog("L_ERR",
"Attempt to route with preloaded Route's
[$fu/$tu/$ru/$ci]");
if (!is_method("ACK"))
sl_send_reply("403","Preload Route denied");
exit;
}
# record routing
if (!is_method("REGISTER|MESSAGE"))
record_route();
# account only INVITEs
if (is_method("INVITE")) {
xlog("*********** INVITE *********** " ) ;
xlog("source IP $si \n " );
xlog("destination URI = $du \n");
xlog("calling user: $tU \n");
xlog("reference to URI of 'To' header ====> $tu");
xlog("reference to domain in URI of 'To' header ====>
$td");
xlog("request user rU = $rU \n");
xlog("from value = $from \n");
xlog("To header: $tu \n");
xlog("requested direction = $rd");
xlog("requested port = $rp ");
xlog("user :: $avp(aor) registered the a new contact");
ยด if (!lookup("location")) {
sl_send_reply("404", "User not found");
exit;
}
# create dialog with timeout
create_dialog();
setflag(ACC_DO); # do accounting
}
# requests for my domain
if (is_method("PUBLISH|SUBSCRIBE"))
{
sl_send_reply("503", "Service Unavailable");
#method save location added
exit;
}
# when routing via usrloc, log the missed calls also
setflag(ACC_MISSED);
route(relay);
t_relay();
route(1);
}
route[relay] {
# for INVITEs enable some additional helper routes
if (!t_relay()){
send_reply("500","Internal Error");
};
exit;
}
onreply_route[2] {
xlog("incoming reply\n");
}
route[1] {
xlog("following route 1 ::: forwarding according to URI");
# forward according to uri
forward();
# for INVITEs enable some additional helper routes
if (!t_relay()) {
sl_reply_error();
};
exit;
}
branch_route[per_branch_ops] {
xlog("new branch at $ru\n");
}
onreply_route[handle_nat] {
xlog("incoming reply\n");
}
failure_route[missed_call] {
if (t_was_cancelled()) {
exit;
}
# uncomment the following lines if you want to block client
# redirect based on 3xx replies.
##if (t_check_status("3[0-9][0-9]")) {
##t_reply("404","Not found");
## exit;
##}
}
local_route {
if (is_method("BYE") && $DLG_dir=="UPSTREAM") {
acc_db_request("200 Dialog Timeout", "acc");
}
--
View this message in context: http://opensips-open-sip-server.1449251.n2.nabble.com/BYE-404-not-here-tp4512769p7608292.html
Sent from the OpenSIPS - Users mailing list archive at Nabble.com.
More information about the Users
mailing list