[OpenSIPS-Users] SIP SDP rfc1918 address fix
Bogdan-Andrei Iancu
bogdan at opensips.org
Wed Apr 26 16:52:41 EDT 2017
So below is the SDP OpenSIPS receives (from network) and when doing
fix_nated_sdp() on that SDP leads to the "c=" errors ?
Regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com
OpenSIPS Summit May 2017 Amsterdam
http://www.opensips.org/events/Summit-2017Amsterdam.html
On 04/26/2017 08:44 PM, Satish Patel wrote:
> Here is my payload again we have custom application which is using SER
> so some of them are custom values, This is the payload after i apply
> fix_nated_sdp() function.
>
>
> Max-Forwards: 16.
> Content-Type: application/sdp.
> Content-Length: 418.
> Supported: path, 100rel.
> P-hint: LOCAL.
> P-hint: ALIASED OUTBOUND.
> P-hint: DIRECT-RTP.
> .
> v=0.
> o=user1 53655765 2353687637 IN IP4 192.168.1.8.
> s=-.
> c=IN IP4 173.71.121.4.
> t=0 0.
> m=audio 6000 RTP/AVP 0.
> a=rtpmap:127 VANI/32000.
> a=fmtp:127 ver=3;mode=3;sub-types=1,7;codecs=0x26.
> a=rtpmap:111 SIREN14-3D/32000.
> a=fmtp:111 bitrate=32000.
> a=vx_payload_hdr_ver:2.
> a=rtpmap:0 PCMU/8000.
> a=vx_join_audio:1.
> a=vx_join_text:0.
> a=vx_jc:60.
> a=setup:both.
> a=vx_rtcp:0.
> a=direction:active.
> a=oldmediaip:192.168.1.8.
>
> On Wed, Apr 26, 2017 at 6:18 AM, Bogdan-Andrei Iancu
> <bogdan at opensips.org> wrote:
>> Hi Satish,
>>
>> For the mime test, you can use the has_body() function:
>> http://www.opensips.org/html/docs/modules/2.2.x/sipmsgops.html#idp3886992
>>
>> About the error - could you post the actual SDP payload generating those
>> errors ?
>>
>> Regards,
>>
>> Bogdan-Andrei Iancu
>> OpenSIPS Founder and Developer
>> http://www.opensips-solutions.com
>>
>> OpenSIPS Summit May 2017 Amsterdam
>> http://www.opensips.org/events/Summit-2017Amsterdam.html
>>
>>
>> On 04/25/2017 10:35 PM, Satish Patel wrote:
>>> We have some custome Voice solution and in-house media server so right
>>> now i don't care about PORT all i need correct IP address.
>>>
>>> I have tried following and it fixed issue but i am seeing following
>>> error in logs
>>>
>>> if (method=="INVITE") {
>>> if(search("^Content-Type:.*application/sdp")) {
>>> fix_nated_sdp("3");
>>> };
>>> };
>>>
>>>
>>> Error:
>>>
>>> ERROR: extract_mediaip: no `c=' in SDP
>>> ERROR: extract_mediaip: no `c=' in SDP
>>>
>>> Do you know what does that means and how to fix that issue?
>>>
>>> On Mon, Apr 24, 2017 at 11:41 PM, Alex Balashov
>>> <abalashov at evaristesys.com> wrote:
>>>> The intent of my questions was to get what you think about what you
>>>> actually want to accomplish. fix_nated_sdp() allows you to replace the
>>>> IP with the received signalling IP:
>>>>
>>>> http://www.opensips.org/html/docs/modules/2.1.x/nathelper.html#id293899
>>>>
>>>> But what about the port?
>>>>
>>>> On Mon, Apr 24, 2017 at 11:39:14PM -0400, Satish Patel wrote:
>>>>
>>>>> after google found bunch of post where people suggesting use
>>>>> fix_nated_sdp() is that right approach ?
>>>>>
>>>>> On Mon, Apr 24, 2017 at 11:25 PM, Alex Balashov
>>>>> <abalashov at evaristesys.com> wrote:
>>>>>> Yes, but RTP can come from a different address than the signalling
>>>>>> (SIP). What sense would there be in substituting the source of the SIP
>>>>>> message in there?
>>>>>>
>>>>>> On Mon, Apr 24, 2017 at 11:23:30PM -0400, Satish Patel wrote:
>>>>>>
>>>>>>> I meant "origin public address of client" if c line isn't public then
>>>>>>> media never work.
>>>>>>>
>>>>>>> c=IN IP4 192.168.1.8.
>>>>>>>
>>>>>>> It should be
>>>>>>>
>>>>>>> c=IN IP4 <public_ip_of_client>
>>>>>>>
>>>>>>> On Mon, Apr 24, 2017 at 11:04 PM, Alex Balashov
>>>>>>> <abalashov at evaristesys.com> wrote:
>>>>>>>> Satish,
>>>>>>>>
>>>>>>>> When you say "origin public address", do you mean the external source
>>>>>>>> address and port of the SIP message, or the incoming RTP stream?
>>>>>>>>
>>>>>>>> On Mon, Apr 24, 2017 at 11:00:40PM -0400, Satish Patel wrote:
>>>>>>>>
>>>>>>>>> In my INVITE/SDP i am seeing sometime rfc1918 address which i want
>>>>>>>>> fix
>>>>>>>>> and replace it with origin public address. ex
>>>>>>>>>
>>>>>>>>> I am seeing following info in INVITE
>>>>>>>>>
>>>>>>>>> v=0.
>>>>>>>>> o=amsip 0 0 IN IP4 192.168.1.8.
>>>>>>>>> s= .
>>>>>>>>> c=IN IP4 192.168.1.8.
>>>>>>>>> t=0 0.
>>>>>>>>> m=audio 22530 RTP/AVP 127 111 0 101.
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> Users mailing list
>>>>>>>>> Users at lists.opensips.org
>>>>>>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>>>>>> --
>>>>>>>> Alex Balashov | Principal | Evariste Systems LLC
>>>>>>>>
>>>>>>>> Tel: +1-706-510-6800 / +1-800-250-5920 (toll-free)
>>>>>>>> Web: http://www.evaristesys.com/, http://www.csrpswitch.com/
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> Users mailing list
>>>>>>>> Users at lists.opensips.org
>>>>>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>>>>> _______________________________________________
>>>>>>> Users mailing list
>>>>>>> Users at lists.opensips.org
>>>>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>>>> --
>>>>>> Alex Balashov | Principal | Evariste Systems LLC
>>>>>>
>>>>>> Tel: +1-706-510-6800 / +1-800-250-5920 (toll-free)
>>>>>> Web: http://www.evaristesys.com/, http://www.csrpswitch.com/
>>>>>>
>>>>>> _______________________________________________
>>>>>> Users mailing list
>>>>>> Users at lists.opensips.org
>>>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>>> _______________________________________________
>>>>> Users mailing list
>>>>> Users at lists.opensips.org
>>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>> --
>>>> Alex Balashov | Principal | Evariste Systems LLC
>>>>
>>>> Tel: +1-706-510-6800 / +1-800-250-5920 (toll-free)
>>>> Web: http://www.evaristesys.com/, http://www.csrpswitch.com/
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users at lists.opensips.org
>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>> _______________________________________________
>>> Users mailing list
>>> Users at lists.opensips.org
>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
More information about the Users
mailing list