[OpenSIPS-Users] opensips-1.11 storing data in memory issue .

[Bogdan-Andrei Iancu]

Are the 2 instances sharing the same database ?

Regards,

Bogdan-Andrei Iancu
   OpenSIPS Founder and Developer
   http://www.opensips-solutions.com

OpenSIPS Summit May 2017 Amsterdam
   http://www.opensips.org/events/Summit-2017Amsterdam.html

On 04/04/2017 06:59 PM, Sasmita Panda wrote:
> I am running two different configuration file in a machine with differ 
> port.
>
>       In one configuration file,  use_domain is disable and in another 
> it's enable.
>
>       In this case,  I am not able to see those contacts in memory 
> which are getting saved without domain.
>       Is that can be a reason? I have tried a lot to know the exact 
> reason.  But every time I am seeing different behaviour.
>
>        The system in which a single configuration is running,  that's 
> working absolutely fine.
>
>       I am stuck in this issue.
>
> On Apr 4, 2017 4:49 PM, "Bogdan-Andrei Iancu" <bogdan at opensips.org 
> <mailto:bogdan at opensips.org>> wrote:
>
>     Well, if the "use_domain" is enabled for usrloc, OpenSIPS expects
>     to find a domain set for all the records in the "location" table,
>     otherwise it will ignore/discard them at loading time.
>
>     The primary storage for registered contacts in the memory cache -
>     OpenSIPS will perform lookups only in memory cache (and not it DB)
>     - of course, unless you use the DB ONLY mode.
>
>     You can check the in-memory registrations by "opensipsctl ul dump"
>
>     Regards,
>
>     Bogdan-Andrei Iancu
>        OpenSIPS Founder and Developer
>        http://www.opensips-solutions.com <http://www.opensips-solutions.com>
>
>     OpenSIPS Summit May 2017 Amsterdam
>        http://www.opensips.org/events/Summit-2017Amsterdam.html
>     <http://www.opensips.org/events/Summit-2017Amsterdam.html>
>
>     On 04/04/2017 01:39 PM, Sasmita Panda wrote:
>>     Hi Bogdan ,
>>            Yes , the domain corresponding to this username is empty .
>>     But the domain for all the contact is not empty .
>>             When the domain for a contact is not empty and its
>>     present in the DB , I am not getting that in the memory . What
>>     could be the reason for this .
>>            Another strange thing happening . When I am setting
>>     db_mode :2 , even if a contact is not present in the memory (but
>>     present in db)
>>     the call get connected . I was assuming when there is no contact
>>     in the memory it should send  "404 Not Found" .
>>            When I am running opensips in AWS linux , everything works
>>     fine . I am not seeing any issue regarding updating memory .
>>     But when I am running this in centos 7 , there is problem in
>>     updating memory in every refresh  .
>>          So where was the problem . opensips is version is same every
>>     where . My config file is same everywhere . But still there is
>>     difference . Why this is happening ?
>>     */Thanks & Regards/*
>>     /Sasmita Panda/
>>     /Network Testing and Software Engineer/
>>     /3CLogic , ph:07827611765/
>>     On Tue, Apr 4, 2017 at 3:22 PM, Bogdan-Andrei Iancu
>>     <bogdan at opensips.org <mailto:bogdan at opensips.org>> wrote:
>>
>>         Hello Sasmita, The error means that at startup time
>>         (preloading the usrloc content from DB into memory), OpenSIPS
>>         finds a record (in the "location" table) with an empty domain
>>         field (username '1111') - could you confirm this by checking
>>         your DB ? Best regards,
>>
>>         Bogdan-Andrei Iancu
>>            OpenSIPS Founder and Developer
>>            http://www.opensips-solutions.com
>>         <http://www.opensips-solutions.com>
>>
>>         OpenSIPS Summit May 2017 Amsterdam
>>            http://www.opensips.org/events/Summit-2017Amsterdam.html
>>         <http://www.opensips.org/events/Summit-2017Amsterdam.html>
>>
>>         On 03/31/2017 01:06 PM, Sasmita Panda wrote:
>>>         Hi  All ,
>>>             I am using opensips-1.11 from long time . But today i
>>>         faced some issue .
>>>         when a username det rigistered , it givind some error in the
>>>         logs like bellow .
>>>         *CRITICAL:usrloc:preload_udomain: empty domain for user
>>>         1111...skipping *
>>>         **
>>>         *    I am getting that entry in the DB but I am not getting
>>>         anything in the memory . Every call to this number failing
>>>         with error 404 Not found .*
>>>         **
>>>         **
>>>         *loadmodule "usrloc.so"*
>>>         *modparam("usrloc", "db_url",
>>>         "mysql://yyyy:xxxx@localhost/opensips")*
>>>         *modparam("usrloc", "db_mode", 1)*
>>>         **
>>>         *    Other default modules are loaded also . It not giving
>>>         any error when starting . But while register its throughing
>>>         such error . *
>>>         **
>>>         *      What the problem i am not getting it . This is
>>>         happening in one machine . In other machine the same config
>>>         with same code is runnign fine .*
>>>         **
>>>         *Please help me if I am doing anything wrong .*
>>>         **
>>>         */Thanks & Regards/*
>>>         /Sasmita Panda/
>>>         /Network Testing and Software Engineer/
>>>         /3CLogic , ph:07827611765/
>>>
>>>         _______________________________________________
>>>         Users mailing list
>>>         Users at lists.opensips.org <mailto:Users at lists.opensips.org>
>>>         http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>         <http://lists.opensips.org/cgi-bin/mailman/listinfo/users>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20170404/c598506d/attachment.html>