[OpenSIPS-Users] Routing in opensips
Bogdan-Andrei Iancu
bogdan at opensips.org
Fri Sep 30 10:32:01 CEST 2016
Hi Eric,
As a first step, can you confirm that the INVITE (sent out by your
OPenSIPS to the internet) has in VIA hdr the public IP of your NAT ?
Best regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com
On 29.09.2016 19:14, Eric Freeman wrote:
>
> It is still not working, I added my public IP as requested. I do not
> have any gateways or anything set up. Do I need to add anything?
>
> I added this to the route statement:
>
>
> if (!uri==myself) {
>
> append_hf("P-hint: outbound\r\n");
>
> set_advertised_address("XXX.XX.XXX.X");
>
> route(relay);
>
>
> I am still receiving these errors:
>
> Sep 29 12:10:22 cd-ubuntu-opensips /usr/local/sbin/opensips[12878]:
> DBG:rr:find_first_route: No Route headers found
>
> Sep 29 12:10:22 cd-ubuntu-opensips /usr/local/sbin/opensips[12878]:
> DBG:rr:loose_route: There is no Route HF
>
> Sep 29 12:10:22 cd-ubuntu-opensips /usr/local/sbin/opensips[12878]:
> DBG:core:parse_headers: flags=78
>
>
>
> Eric Freeman
>
> Technical Director/NA for TBWA\Chiat\Day
>
> TBWA\Chiat\Day New York
> 488 Madison Ave.
> New York NY 10022
> United States of America
> Tel: +12128041324 <tel:%2B12128041324>
> ------------------------------------------------------------------------
> *From:* Bogdan-Andrei Iancu <bogdan at opensips.org>
> *Sent:* Tuesday, September 20, 2016 8:38:31 AM
> *To:* Eric Freeman; OpenSIPS users mailling list
> *Subject:* Re: [OpenSIPS-Users] Routing in opensips
> He Eric,
>
> In the script (generated by menuconfig), you have an IF block with :
> append_hf("P-hint: outbound\r\n");
>
> That block is executed if one of your users is dialing an external SIP
> domain. So, that is the place where the calls will break out to public
> internet.
>
> As your OpenSIPS has a private IP (not routable in internet), you need
> to configure it to advertise the public IP of your NAT via the
> set_advertise_address() - see:
> http://www.opensips.org/Documentation/Script-CoreFunctions-2-2#toc46
>
> Put there the public IP of your NAT. Also, be sure you create in your
> router (running the NAT) a port forwarding from the public IP port
> 5060 UDP to the private IP of your OpenSIPS port 5060 UDP.
>
> Best regards,
> Bogdan-Andrei Iancu
> OpenSIPS Founder and Developer
> http://www.opensips-solutions.com
> On 15.09.2016 13:10, Eric Freeman wrote:
>> Yes.
>>
>> Get Outlook for iOS <https://aka.ms/o0ukef>
>>
>> ------------------------------------------------------------------------
>> *From:* Bogdan-Andrei Iancu <bogdan at opensips.org>
>> *Sent:* Thursday, September 15, 2016 4:57:45 AM
>> *To:* Eric Freeman; OpenSIPS users mailling list
>> *Subject:* Re: [OpenSIPS-Users] Routing in opensips
>> Hello Eric,
>>
>> So, you OpenSIPS is running behind a NAT ?
>>
>> Regards,
>> Bogdan-Andrei Iancu
>> OpenSIPS Founder and Developer
>> http://www.opensips-solutions.com
>> On 14.09.2016 18:43, Eric Freeman wrote:
>>>
>>> Thank you. I am using the residential script and my device is
>>> registered. When I register two devices I can call between them.
>>> But, when I want to send the traffic out to the Internet I receive
>>> these types of errors. My device is a 10 address trying to call
>>> public IPs on the Internet. It appears I need to add a default route
>>> in opensips? It seems like it can't send the traffic to the Internet
>>> or a default route. The opensips server itself can get onto the
>>> Internet.
>>>
>>>
>>> Aug 22 15:12:55 cd-ubuntu-opensips /usr/local/sbin/opensips[11973]:
>>> DBG:core:get_hdr_field
>>>
>>> : found end of header
>>>
>>> Aug 22 15:12:55 cd-ubuntu-opensips /usr/local/sbin/opensips[11973]:
>>> DBG:rr:find_first_rout
>>>
>>> e: No Route headers found
>>>
>>> Aug 22 15:12:55 cd-ubuntu-opensips /usr/local/sbin/opensips[11973]:
>>> DBG:rr:loose_route: Th
>>>
>>> ere is no Route HF
>>>
>>> Aug 22 15:12:55 cd-ubuntu-opensips /usr/local/sbin/opensips[11973]:
>>> DBG:dialog:w_create_di
>>>
>>> alog2: bye on timeout activated
>>>
>>>
>>> Thank you,
>>>
>>>
>>> Eric Freeman
>>>
>>>
>>> ------------------------------------------------------------------------
>>> *From:* Bogdan-Andrei Iancu <bogdan at opensips.org>
>>> *Sent:* Wednesday, September 14, 2016 10:47:23 AM
>>> *To:* OpenSIPS users mailling list; Eric Freeman
>>> *Subject:* Re: [OpenSIPS-Users] Routing in opensips
>>> Hi Eric,
>>>
>>> A good starting point is the residential script that can be
>>> generated via the menuconfig tool. See:
>>> http://www.opensips.org/Documentation/Generating-Configs-2-2
>>>
>>> Then have your unit registered with your OpenSIPS.
>>>
>>> Best regards,
>>> Bogdan-Andrei Iancu
>>> OpenSIPS Founder and Developer
>>> http://www.opensips-solutions.com
>>> On 12.09.2016 18:15, Eric Freeman wrote:
>>>>
>>>> I am very new to opensips and I want to use it for one application.
>>>> I have installed version: opensips 2.2.1 (x86_64/linux)
>>>>
>>>> on Ubuntu 14.04.2 LTS
>>>>
>>>> Release: 14.04
>>>>
>>>>
>>>> I have a video conference unit and I want to be able make SIP calls
>>>> to other video conference
>>>>
>>>> units over the Internet.
>>>>
>>>>
>>>> I believe I need to set up some type of routing to route calls from
>>>> this device out
>>>>
>>>> to the Internet. I believe I need to add some commands to the route
>>>> section of the configuration file. Can someone please let me know
>>>> what commands I need to the config to allow the unit to call other
>>>> units via sip over the Internet. I am using the “default routing”
>>>> from the residential script.
>>>>
>>>>
>>>> I have registered the video conference unit to the opensips server
>>>>
>>>>
>>>> Contact:: sip:LifeSize at 10.89.71.12;transport=UDP Q=
>>>>
>>>>
>>>> from config
>>>>
>>>> listen=udp:10.88.23.13:5060 # CUSTOMIZE ME
>>>>
>>>>
>>>> listen=tcp:10.88.23.13:5060 # CUSTOMIZE ME
>>>>
>>>>
>>>> Please let me know if you need more information.
>>>>
>>>>
>>>> Thank you,
>>>>
>>>> Eric Freeman
>>>>
>>>>
>>>>
>>>> -------------------------------------------------------------------------------
>>>> This e-mail is intended only for the named person or entity to
>>>> which it is addressed and contains valuable business
>>>> information that is privileged, confidential and/or otherwise
>>>> protected from disclosure. If you received this e-mail
>>>> in error, any review, use, dissemination, distribution or copying
>>>> of this e-mail is strictly prohibited. Please notify us
>>>> immediately of the error via e-mail to disclaimer at email-abuse.com
>>>> and please delete the e-mail from your system,
>>>> retaining no copies in any media. We appreciate your cooperation.
>>>> -------------------------------------------------------------------disc99999999
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users at lists.opensips.org
>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20160930/17c3323a/attachment-0001.htm>
More information about the Users
mailing list