[OpenSIPS-Users] $ai transformation

[Răzvan Crainea]

Hi, Ehrny!

Did you try setting the private socket on the reply?

Best regards,

Răzvan Crainea
OpenSIPS Solutions
www.opensips-solutions.com

On 11/17/2016 01:00 AM, Ehrny wrote:
>
> Dear Răzvan,
>
> Thanks again for the prompt help. I was able to change the headers as 
> needed but I’m stuck with another problem(
>
> I’ve got opensips with two Ethernet adapters, eth1 as a private and 
> another one eth0 as public.  Opensips works fine when the call is 
> coming on the public eth0 and leaves opensips through the same public 
> adapter. (All the GWs are behind that public eth0 instead of one ). 
> The problem happens when the call comes in through the private eth1, 
> please see the drawing in attachment.
>
> -sip1.  After I’ve got invite from provider on the private eth1 , I 
> send it through the public eth0.
>
> -sip2.  I use force_send_socket(udp:PUBLIC_IP:PORT) for the call to be 
> able to pass through the opensips and come back from external GW 
> (x.x.82.139). I also change SIP Request's URI and use uac_replace_to 
> () to change these fields as needed.
>
> -sip4.  Opensips has got 180 Ringing from external GW (x.x.82.139)
>
> -sip5.  Opensips tries to send it back to originator (10.250.242.74) 
> which is behind private NIC eth0 (10.197.26.170)
>
> the call can not be set up because I send reply from my public eth1
>
> 2016-11-16 18:56:14      : x.x.80.43:5060 -> 10.250.242.74:5060
>
> SIP/2.0 *180*Ringing Via: SIP/2.0/UDP 
> 10.250.242.74:5060;branch=*z9hG4bKqci5ec***Record-Route: 
> <sip:x.x.80.43;r2=on;lr;ftag=*2F81324631*;did=3a2.4667b68 
> <sip:x.x.80.43;r2=on;lr;ftag=2F81324631353641A405EA00;did=3a2.4667b68>> 
> Record-Route: 
> <sip:10.197.26.170;r2=on;lr;ftag=*2F81324631*;did=3a2.4667b68 
> <sip:10.197.26.170;r2=on;lr;ftag=2F81324631353641A405EA00;did=3a2.4667b68>> 
> From: sip:300940 at domain.com;tag=*2F81324631* 
> <sip:300940 at domain.com;tag=2F81324631353641A405EA00> To: 
> sip:300905 at domain.com:5060;tag=231469dIr894 
> <sip:300905 at domain.com:5060;tag=231469dIr894p0D461D0t66> Call-ID: 
> *020A3EA03A8 at SFESIP4-id1-ext*CSeq: 1 INVITE Contact: 
> <sip:54321 at x.x.82.139:5060>
>
> I’m not sure if I do it right way because the packet (sip5) goes to 
> 10.250.242.74 with the source ip of public eth0 and not the one it 
> should pass through to be able to come back.
>
> What is the right way in my case to get the call through?
>
> Thank you for all of your help,
>
> Regards,
>
> Ehrny
>
>
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20161118/372165d2/attachment.htm>