[OpenSIPS-Users] Routing from PSTN A back to PSTN A

[Nagorny, Dimitry]

Hi all,

when I shoot the following routing rule:

        if ($rU=~"^[1]$" && src_ip==192.168.1.30) {
                xlog("PBX to UA at PBX! $rU@$rd:$rp via $si");
                $rU="185511";
                $rd="192.168.1.30";
                $rp="5060";
                $du="sip:185511 at 192.168.1.30:5060";
                xlog("PBX to UA at PBX! $rU@$rd:$rp via $si");
                force_send_socket(udp:192.168.1.150:5060);
                t_relay();
                exit;
        }

I don't get why OpenSIPS is reverting my changes somewhere internally so this happens:

U 192.168.1.30:5060 -> 192.168.1.150:5060   (PSTN to OpenSIPS)
  INVITE sip:1 at 192.168.1.150;user=phone SIP/2.0
  To: sip:1 at 192.168.1.150;user=phone
  From: "bla" <sip:2031 at 192.168.1.30;user=phone>;tag=7d6bed4b820d54e0c0ae4cb86f442b81
#
U 192.168.1.150:5060 -> 192.168.1.30:5060
  SIP/2.0 100 Giving a try
  To: sip:1 at 192.168.1.150;user=phone
  From: "bla" <sip:2031 at 192.168.1.3  0;user=phone>;tag=7d6bed4b820d54e0c0ae4cb86f442b81
#
U 192.168.1.150:5060 -> 192.168.1.30:5060
  INVITE sip:185511 at 192.168.1.30:5060;user=phone SIP/2.0
  To: sip:1 at 192.168.1.150;user=phone
  From: "bla" <sip:2031 @192.168.1.30;user=phone>;tag=7d6bed4b820d54e0c0ae4cb86f442b81
#
U 192.168.1.30:5060 -> 192.168.1.150:5060
  SIP/2.0 100 Trying
  To: sip:1 at 192.168.1.150;user=phone
  From: "bla" <sip:2031 at 192.168.1.30;user=phone>;tag=7d6bed4b820d54e0c0ae4cb86f442b81

I simply want if someone from inside or outside calls a known area of numbers that they are getting relayed to a different number. Is the above routing script part wrong for my purpose?


Very Respectfully
Dimitry Nagorny
Trainee

robot5 GmbH

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20160315/f33e0bcd/attachment.htm>