[OpenSIPS-Users] Engage rtpengine if destination resigstered client is ipv6

[Eric Tamme]

The proper way to do this is to check when the user registers if they 
are ipv4 or ipv6 and set a branch flag that will be saved with the 
registration.  When you call lookup, it will restore the branch flag, 
allowing you access to the information about the UAS ipv4, ipv6, behind 
a not or not etc.

-Eric

On 02/08/2016 09:52 AM, Jonathan Hunter wrote:
> Hi Eric,
>
>
>                  
> Thanks for the response on this.
> The main issue was with identifying if the
>                    Registered user I was sending the INVITE request to
>                    was over IPv6 or IPv4, and it looks like your config
>                    should give me an indication.
> Many thanks
>
>
>                  
> Jon
>
>
>                  
> Message: 5
>
>                    Date: Mon, 8 Feb 2016 07:44:18 -0700
>
>                    From: Eric Tamme <eric at uphreak.com>
>
>                    Subject: Re: [OpenSIPS-Users] Engage rtpengine if
>                    destination
>
>                    resigstered client is ipv6
>
>                    To: OpenSIPS users mailling list
>                    <users at lists.opensips.org>
>
>                    Message-ID: <56B8A9C2.6090104 at uphreak.com>
>
>                    Content-Type: text/plain; charset="windows-1252";
>                    Format="flowed"
>
>                    
>
>                    You can see an example of setting the flags in my
>                    federated-sip project
>
>                    https://github.com/etamme/federated-sip/blob/master/core/opensips.cfg.erb#L558
>
>                    
>
>                    -Eric

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20160208/221bbaa2/attachment.htm>