[OpenSIPS-Users] Too many warnings in opensips log
Ramachandran, Agalya (Contractor)
Agalya_Ramachandran at comcast.com
Tue Aug 30 18:43:04 CEST 2016
Hi Bogdan,
Yes, am doing rest queries using async.
Regards,
Agalya
From: Bogdan-Andrei Iancu [mailto:bogdan at opensips.org]
Sent: Tuesday, August 30, 2016 12:17 PM
To: Ramachandran, Agalya (Contractor) <Agalya_Ramachandran at comcast.com>; OpenSIPS users mailling list <users at lists.opensips.org>
Subject: Re: [OpenSIPS-Users] Too many warnings in opensips log
Hi Agalya,
Before answering, a fast question to you :).
What kind of processing do you in the script for the INVITEs ? is it something time consuming, potential blocking like DB queries, DNS, rest queries ?
Regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com
On 30.08.2016 18:42, Ramachandran, Agalya (Contractor) wrote:
Hi Bogdan,
In understand why these warnings are occurred.
Yes, I initially used the default script with children as 4. With this config sending 10 calls at 2cps am getting these warnings continuously.
After that I changed the children to 12. And now it's all good.
But I have a question. When I try to run the load test in opensips 1.11, I had children as 1, and I could run like 100 cps.
Why in the opensips 2.1.4 version we are getting this warnings. What has changed between 1.11 and 2.1.4?
The only way to avoid this is to keep increasing the children?
In the new opensips in order to run 100cps I should increase my children to somewhere around 150?
Regards,
Agalya
From: Bogdan-Andrei Iancu [mailto:bogdan at opensips.org]
Sent: Tuesday, August 30, 2016 6:20 AM
To: Ramachandran, Agalya (Contractor) <Agalya_Ramachandran at comcast.com><mailto:Agalya_Ramachandran at comcast.com>; OpenSIPS users mailling list <users at lists.opensips.org><mailto:users at lists.opensips.org>
Subject: Re: [OpenSIPS-Users] Too many warnings in opensips log
Hi Agalya,
The message that usually pops up first :
WARNING:core:utimer task <tm-utimer> already scheduled for....
tells that the given timer routing is slow (tm-utimer in our case) and the previous execution is not completed when the next triggering happens. This TM routine is responsible for SIP retransmissions.
The second message
WARNING:core:handle_timer_job: utimer job <tm-utimer> has a xxxxx us delay in execution
tells how long the timer job spent between being scheduled (triggered) and being lunched in execution (the 2 events happen in different processes).
In your case, you have 4 processes, one UDP listener and you do 2cps ? and you get one of the warnings ? do you use the default script ?
Best regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com
On 26.08.2016 16:17, Ramachandran, Agalya (Contractor) wrote:
Yes Bogdan , I do get those warnings.
Regards,
Agalya
From: Bogdan-Andrei Iancu [mailto:bogdan at opensips.org]
Sent: Thursday, August 25, 2016 5:20 PM
To: Ramachandran, Agalya (Contractor) <Agalya_Ramachandran at comcast.com><mailto:Agalya_Ramachandran at comcast.com>; OpenSIPS users mailling list <users at lists.opensips.org><mailto:users at lists.opensips.org>
Subject: Re: [OpenSIPS-Users] Too many warnings in opensips log
Hi Agalya,
Before those warnings, have you got an warning like:
WARNING:core:utimer_ticker: utimer task <tm-utimer> already scheduled for....
Regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com
On 25.08.2016 18:08, Ramachandran, Agalya (Contractor) wrote:
Hi Bogdan,
Does OpenSIPS recover from this ?
Answer: It depends upon the volume of the call. If am sending too many calls (may be more than 50 calls), OpenSIPS is not recovering. And am restarting
But if I send less than 10 calls then it is OK.
Have you seen other job reported, besides "tm-utimer" ?
Answer: I also have "blcore-expire" in logs, like once every 10 times of "tm-utimer"
I also observed that increasing the children process in config file, is solving this issue.
P.S:
e.g : Sending 10 calls to opensips, at 2 calls per sec, then I need to keep children as 12.
For even 10 calls, if I keep children as 4, 4 to 6 calls are passing and other calls are failing.
Why do we need to increase the children process?
Just to confirm, is opensips 2.1.4 version a stable release?
Regards,
Agalya
From: Bogdan-Andrei Iancu [mailto:bogdan at opensips.org]
Sent: Thursday, August 25, 2016 10:54 AM
To: OpenSIPS users mailling list <users at lists.opensips.org><mailto:users at lists.opensips.org>; Ramachandran, Agalya (Contractor) <Agalya_Ramachandran at comcast.com><mailto:Agalya_Ramachandran at comcast.com>
Subject: Re: [OpenSIPS-Users] Too many warnings in opensips log
Hi Agalya,
Question : after you get these logs, you mentioned the inability of handling new calls. Does OpenSIPS recover from this ? or you have to restart after such an event ?
Have you seen other job reported, besides "tm-utimer" ?
Regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com
On 24.08.2016 18:31, Ramachandran, Agalya (Contractor) wrote:
Hi team,
Am using opensips 2.1.4 version and trying to do load test. When running the test cases, am getting too many warnings in OpenSIPS log.
These warnings are coming continuously and its more than 2 page in log file.
Below are the warnings.
Aug 24 15:27:34 sturn-test /usr/local/sbin/opensips[12015]: WARNING:core:handle_timer_job: utimer job <tm-utimer> has a 39450000 us delay in execution
Aug 24 15:27:34 sturn-test /usr/local/sbin/opensips[12015]: WARNING:core:handle_timer_job: utimer job <tm-utimer> has a 39450000 us delay in execution
Aug 24 15:27:34 sturn-test /usr/local/sbin/opensips[12015]: WARNING:core:handle_timer_job: utimer job <tm-utimer> has a 39450000 us delay in execution
Aug 24 15:27:34 sturn-test /usr/local/sbin/opensips[12015]: WARNING:core:handle_timer_job: utimer job <tm-utimer> has a 39450000 us delay in execution
Aug 24 15:27:34 sturn-test /usr/local/sbin/opensips[12015]: WARNING:core:handle_timer_job: utimer job <tm-utimer> has a 39450000 us delay in execution
Aug 24 15:27:34 sturn-test /usr/local/sbin/opensips[12015]: WARNING:core:handle_timer_job: utimer job <tm-utimer> has a 39450000 us delay in execution
When I get this Warning, calls are getting failed.
Why am getting this warning and what could be done to avoid it?
Regards,
Agalya
_______________________________________________
Users mailing list
Users at lists.opensips.org<mailto:Users at lists.opensips.org>
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20160830/1acd064a/attachment-0001.htm>
More information about the Users
mailing list