[OpenSIPS-Users] Regarding siptrace module .

[Sasmita Panda]

Then what IP will I set there . We are running like this and there is no
problem we are facing yet .

I cant put the public ip over there . If I will put the private ip then
While forwarding HEP packets to any other IP it wont work .

There is an option I will set only the port=5506 and so that it will work
on all the interfaces (public and private ) .

But giving the port , I am facing another problem . If there is more than
one port then how will I give multiple ports ?

*Thanks & Regards*
*Sasmita Panda*
*Network Testing and Software Engineer*
*3CLogic , ph:07827611765*

On Fri, Apr 29, 2016 at 7:20 PM, Bogdan-Andrei Iancu <bogdan at opensips.org>
wrote:

> Hi Sasmita,
>
> OpenSIPS does not support 0.0.0.0 IP. You need to have an explicit IP
> there.
>
> Regards,
>
> Bogdan-Andrei Iancu
> OpenSIPS Founder and Developerhttp://www.opensips-solutions.com
>
> On 29.04.2016 11:46, Sasmita Panda wrote:
>
> Hi All ,
>
>      I am trying to integrate HOMER with opensips . I am using opensips as
> my capture agent and forwarding the HEP packets to the capture server which
> is kamailio .
>
>       My opensips is running on AWS EMI . Where there is a public and a
> private IP of the machine . So we used to writein the bellow format in the
> opensips config .
>
>
> *"listen=0.0.0.0:5506 <http://0.0.0.0:5506> AS 54.211.x.y:5506 " *
>
>        Second part is the public ip , and that get used for publishing any
> message out side . the first part is for internal use .
> With this if I am trying to forward the HEP packet through siptrace module
> , I had configured like bellow .
>
> #----load siptrcae module for trace node -------
> modparam("siptrace", "duplicate_uri", "sip:107.170.x.y:9060")
> modparam("siptrace", "duplicate_with_hep", 1)
> modparam("siptrace", "trace_to_database", 0)
> modparam("siptrace", "trace_flag", 22)
> modparam("siptrace", "trace_on", 1)
> #HEPv2 == timestamp will be included to HEP header
> modparam("siptrace", "hep_version", 2)
>
>        In "107.170.x.y:9060" my kamailio is running . But when I am trying
> to forward the packets its giving error .
>
> *"ERROR:siptrace:pipport2su: host <0.0.0.0> is not an IP"  . *
>
>           If I am changing my opensips config to *"listen=**54.211.x.y:5506
> AS **54.211.x.y:5506 " *then its running fine .
>
>
>       How will I get read of this error without changing my listen IP and
> port line ?
> Is there anything I can do in the siptrace module to use the public ip
> only rather than using " *0.0.0.0* " ?
>
>
> *Thanks & Regards*
> *Sasmita Panda*
> *Network Testing and Software Engineer*
> *3CLogic , ph:07827611765*
>
>
> _______________________________________________
> Users mailing listUsers at lists.opensips.orghttp://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20160429/14c974d9/attachment-0001.htm>