[OpenSIPS-Users] Rely forbidden

[SamyGo]

Hi,
So all you've gotta do with sngrep is select an INVITE and press Enter...it
will open up the whole signalling flow, you can use arrow keys up and down
to inspect individual packet as well. I was expecting that it'll be easier
for you to just start using it right away.

*Idx:*    [ ] 1
*SIP From: *anonymous at anonymous.inval
*SIP To: *0972550428 at 10.7.1.68
*Msgs: 3*
*Source: *91.121.129.159:5060
*Destination: *10.0.0.5:5060
*Method:* INVITE
*Call State:* REJECTED

So, based on above data your OpenSIPS is unaware of the requested domain "
*10.7.1.68*" check again with your provider or their settings.
And if this still shows up I'd suggest (*just for a change*) to use the
domain module, put DB URL in that module, and add this 10.7.1.68 as domain
in the table specified.
You could also use alias=10.7.1.68 in opensips.cfg to get the same effect
as well. Not recommended but doing these will tell your opensips that this
$rd now belongs to itself and hence you wont get this 403 Rely Forbidden
message.

Regards,
Sammy



On Thu, Apr 14, 2016 at 11:18 AM, Jeff Wilkie <jwilkie at usipcom.com> wrote:

> Can you use this to capture the signaling for reading and relaying here?
> I'm assuming you are only listening on port 5060.  Your details on the
> packets do not help with a resolution.
>
> ngrep -d eth0 -t -W byline "$1" port 5060 -q
>
> Jeff Wilkie
> Chief Technology Officer
> US IP Communications
> 919.297.1057
>
>
> *"This e-mail communication and any attachments may contain confidential
> and privileged information and is for use by the designated addressee(s)
> named above only. Any files transmitted with it are confidential and
> intended solely for the use of the individual to whom it is addressed. Any
> views or opinions presented are solely those of the author and do not
> necessarily represent those of USIPCOM, LLC. If you are not the intended
> addressee, you are hereby notified that you have received this
> communication in error and that any use or reproduction of this email or
> its contents is strictly prohibited and may be unlawful. If you have
> received this communication in error, please notify us immediately by
> replying to this message and deleting it from your computer. Thank you". *
>
> On Thu, Apr 14, 2016 at 10:28 AM, Francjos <35633 at heb.be> wrote:
>
>> When i analyse the output of the command sngrep, there is something i
>> don't
>> understand,
>> the sip to = 0972550428 at 10.7.1.68
>> I recognize the 0972550428, but don't recognize the other part. What that
>> mean?
>> Since yesterday i'm searching why the INVITE is rejected in Opensips.
>> Can somebody help please?
>>
>>
>>
>> --
>> View this message in context:
>> http://opensips-open-sip-server.1449251.n2.nabble.com/Rely-forbidden-tp7602608p7602616.html
>> Sent from the OpenSIPS - Users mailing list archive at Nabble.com.
>>
>> _______________________________________________
>> Users mailing list
>> Users at lists.opensips.org
>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20160414/778e4ab2/attachment-0001.htm>