[OpenSIPS-Users] Bare Bones

Fri Oct 30 12:01:17 CET 2015

Yesterday my reply got blocked by the list.... trying again!

After a quick look I noticed you are listening only the loopback(127.0.0.1)
interface. I think you should listen to some real interface. This should
have the same IP you are configuring your Ekiga to register to.

On Fri, Oct 30, 2015 at 8:56 AM, Rodrigo Pimenta Carvalho <pimenta at inatel.br
> wrote:

> Hi Alexander.
>
> I'm back to the office.
>
> In case you still want to see some of the SIP messages  in a kind of
> OpenSIPS log, run:
>
> sudo /etc/init.d/opensips start
>
> And I have used the following lines in my config file:
>
> -----------------------------------------------------------------------
> ####### Global Parameters #########
>
> debug=4
> log_stderror=yes
> log_facility=LOG_LOCAL1
>
> fork=yes
> children=4
>
> /* uncomment the following lines to enable debugging */
> #debug=6
> #fork=no
> #log_stderror=yes
>
>
> listen=udp:eth0:5060   # CUSTOMIZE ME
>
> listen=tcp:eth0:5060   # CUSTOMIZE ME
> listen=tls:eth0:5061   # CUSTOMIZE ME
> ---------------------------------------------------------------------------
>
> And in the file opensipsctlrc I have:
>
> -----------------
> STARTOPTIONS=" -E -f
> /usr/local/opensips_proxy/etc/opensips/my_opensips_configFile.cfg"
> ----------------
>
>
> Maybe you also should consider (for debugging purpose) (I'm using Ubuntu
> 14.04 LTI):
>
>
> 1 - cd /usr/local/src/1.8/packaging/debian/
> 2 - cp -Rf opensips.init /etc/init.d/opensips
> 3 - chmod +x /etc/init.d/opensips
> 4 - vi /etc/init.d/opensips
> 5 - Edit the line of DAEMON:
>      DAEMON = /usr/local/opensips_proxy/sbin/opensips
>
>
> 6 - Find the string OPTIONS
> 7 - In such line with OPTIONS, add: "-f " in the end of the line.
>      EX: ... $GROUP -f
> /usr/local/opensips_proxy/etc/opensips/my_opensips_configFile..."
> 8 - Save the file and close it.
>
>
> 9 - cd /usr/local/src/1.8/packaging/debian/
> 10 - cp opensips.default /etc/default/opensips
> 11 - vi /etc/default/opensips
> 12 - RUN_OPENSIPS=yes
>      #User to run as
>      USER=root
>
>      GROUP=root
>
>      S_MEMORY=128
>
> 13 - vi /etc/rsyslog.conf
> 14 - add: local1.*                      -/var/log/opensips.log
>
>
>
>
> Hopefully something here should be useful for you.
>
> P.S.:  I got all instructions from :
> https://www.youtube.com/watch?v=YNHc8TQq85A
>           I 'm also a beginner with these things.
>
> About wireshark, try to see some short tutorial from Youtube too. What
> about?
>
> RODRIGO PIMENTA CARVALHO
> Inatel Competence Center
> Software
> Ph: +55 35 3471 9200 RAMAL 979
>
> ________________________________________
> De: users-bounces at lists.opensips.org <users-bounces at lists.opensips.org>
> em nome de Alexander Shukaev <opensips at Alexander.Shukaev.name>
> Enviado: quinta-feira, 29 de outubro de 2015 22:22
> Para: OpenSIPS users mailling list
> Assunto: Re: [OpenSIPS-Users] Bare Bones
>
> So far I've made some good progress and I would like to share it.  Big
> thanks to Travis for pointing me into the right direction.
>
> It turns out that I had
>
> STORE_PLAINTEXT_PW=0
>
> which is a natural setting for production I guess.  Hence,
>
> modparam("auth_db", "calculate_ha1", yes)
> modparam("auth_db", "password_column", "password")
>
> is no longer valid.  It should rather be
>
> modparam("auth_db", "calculate_ha1", no)
> modparam("auth_db", "password_column", "ha1")
>
> Don't forget to stop 'opensips', then
>
> sudo opensipsdbctl drop
> sudo opensipsdbctl create
>
> and again
>
> sudo opensipsctl add 1234 1234
> sudo opensipsctl add 5678 5678
>
> and start 'opensips' again.  Then it really starts to work with the
> registration in Ekiga.  Finally!
>
> Next, I moved to testing the communication between those accounts.  To
> do this, in addition to Ekiga I installed Linphone.  So, through Ekiga,
> I register 1234 and add 5678 to contacts, while through Linphone, I
> register 5678 and add 1234 to contacts.  It turns out that there is
> another strange problem now.  Within Linphone I can both IM and call
> from 5678 to 1234 (Ekiga) and in Ekiga I can read those IMs and accept
> calls accordingly, while within Ekiga I can neither IM nor call from
> 1234 to 5678 (Linphone) as for IMs, for example, I get sometimes either
> "NOTICE: Could not send message: Unauthorised" or  "NOTICE: Could not
> send message: Forbidden".  I attach the Wireshark log for the
> "Forbidden" case.
>
> Regards,
> Alexander
>
> On 30.10.2015 00:18, Alexander Shukaev wrote:
> >> It doesn't look like there's a password specified for the user in your
> >> DB
> >>
> >> Did you configure you UAC to use one?
> >
> > Could it be because it's hashed?  I'm under impression that it's
> > stored in 'ha1' and 'ha1b' fields in the encoded form due to
> >
> > modparam("auth_db", "calculate_ha1", yes)
> > modparam("auth_db", "password_column", "password")
> > modparam("auth_db|uri", "db_url",
> > "postgres://opensips:$@localhost/opensips") # CUSTOMIZE ME
> > modparam("auth_db", "load_credentials", "")
> >
> >> Also, did you use the opensipsdbctl create to build your user?
> >
> > Of course, I'm pretty sure it was:
> >
> > sudo opensipsdbctl create
> > sudo opensipsctl add 1234 1234
> > sudo opensipsctl add 5678 5678
> >
> > _______________________________________________
> > Users mailing list
> > Users at lists.opensips.org
> > http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20151030/208aaff9/attachment.htm>