[OpenSIPS-Users] No Route headers found

[Podrigal, Aron]

Hello Nabeel,

I was expecting to get a textual file with all sip headers like the output
of ngrep -tqd any -W byline   I did not have a pc to be able to decode this
pcap with tshark. I'll try to give a look at it tomorrow.

Just a note,  try adding a transport=tls to contact.
On Jul 11, 2015 2:59 AM, "Nabeel" <nabeelshikder at gmail.com> wrote:

> In the log, I see that 'uri' does not have ';transport=tls',  but the
> 'ruri' does have ';transport=tls' :
>
> DBG:core:parse_msg:  uri:     <sip:mydomain.com>
>
> DBG:core:parse_to: display={}, ruri={sip:username at mydomain.com
> ;transport=tls}
>
>
> On 11 July 2015 at 07:33, Nabeel <nabeelshikder at gmail.com> wrote:
>
>> I checked the SIP capture in Wireshark and it seems the client is using
>> the wrong port:
>>
>> "Src port 3921 (3921)  [Client IP]
>>
>> Dst port 5061 (5061)  [OpenSIPS IP]"
>>
>> The client is set to use port 5061 in its settings and I have the
>> following in OpenSIPS config:
>>
>> $rp = 5061
>> add_uri_param("transport=tls");
>> force_send_socket("tls:ip:port");
>>
>> So how can I add the route header to fix this?
>>
>>
>>
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20150712/5ab5ae85/attachment.htm>