[OpenSIPS-Users] Opensips with Private IP

[Ovidiu Sas]

You don't need to do 1 to 1 NAT.  Simply do a port forward on 5060 and
that's enough.

Regards,
Ovidiu Sas

On Thu, Jan 22, 2015 at 7:41 PM, bluerain <frank21118 at yahoo.com> wrote:
> Ok!  Thank you very much, so currently I have:
>
> listen=udp:99.99.99.1:5060
>
> where my NIC card is actually 99.99.99.1
>
> So now I can change my NIC card to 192.168.1.100 and then put in opensip
> config file as:
>
> listen=udp:192.168.1.100:5060 as 99.99.99.1:5060
>
> And that I simply do 1 to 1 nat on the firewall to map 99.99.99.1 to
> 192.168.1.100
>
> And that the SIP message it generate on the opensip (e.g. the
> record_route/Via header/blah) will all be 99.99.99.1 instead of
> 192.168.1.100?
>
>
>
>
> --
> View this message in context: http://opensips-open-sip-server.1449251.n2.nabble.com/Opensips-with-Private-IP-tp7595038p7595041.html
> Sent from the OpenSIPS - Users mailing list archive at Nabble.com.
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users



-- 
VoIP Embedded, Inc.
http://www.voipembedded.com