[OpenSIPS-Users] Register timeout question.

[Bogdan-Andrei Iancu]

Rodrigo,

The feature I mentioned was just pushed to GIT :
https://github.com/OpenSIPS/opensips/commit/a1992cd14fe393ca3b3fba0dac0a423e28764966

It relies on some heavy changes on the usrloc (available only on trunk), 
so you cannot simply copy only the above commit.

Regards,

Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com

On 31.08.2015 14:20, Rodrigo Pimenta Carvalho wrote:
>
> Ok.
>
> Thank you!
>
>
> RODRIGO PIMENTA CARVALHO
> Inatel Competence Center
> Software
> Ph: +55 35 3471 9200 RAMAL 979
>
>
> ------------------------------------------------------------------------
> *De:* Bogdan-Andrei Iancu <bogdan at opensips.org>
> *Enviado:* segunda-feira, 31 de agosto de 2015 06:04
> *Para:* Rodrigo Pimenta Carvalho; OpenSIPS users mailling list
> *Assunto:* Re: [OpenSIPS-Users] Register timeout question.
> Hi Rodrigo,
>
> I meant 40 mins from the registration time (out for the overall 60). 
> And yes, yous suspicion is correct.
>
> As said, the "opensipsctl online" only shows the registered contacts, 
> without actually checking their current status.
>
> The patch I mentioned will be available in the next days in OpenSIPs 
> 2.2 devel.
>
> Regards,
> Bogdan-Andrei Iancu
> OpenSIPS Founder and Developer
> http://www.opensips-solutions.com
> On 28.08.2015 20:09, Rodrigo Pimenta Carvalho wrote:
>>
>> Hi Bogdan.
>>
>>
>> Thank you again.
>>
>>
>> Do you mean 40 or 30 mins? If the registration is for 60' and the 
>> network break down after 30', so I suspect that the registration will 
>> remain online only for more 30'.  Not 40'. Am I correct?
>>
>>
>> As I need to know as soon as possible, by means of the SIP Registrar, 
>> whether a device became offline, I  think that the command 
>> 'opensipsctl online' will be really useful, if each device register 
>> for 10 seconds for example.
>>
>>
>> What do you think about this approach? Comment, please.
>>
>>
>> If the approach is unappropriated, I will take a look in that 
>> internal PR you have said.
>>
>>
>> Regards.
>>
>>
>> RODRIGO PIMENTA CARVALHO
>> Inatel Competence Center
>> Software
>> Ph: +55 35 3471 9200 RAMAL 979
>>
>>
>> ------------------------------------------------------------------------
>> *De:* Bogdan-Andrei Iancu <bogdan at opensips.org>
>> *Enviado:* sexta-feira, 28 de agosto de 2015 12:33
>> *Para:* Rodrigo Pimenta Carvalho; OpenSIPS users mailling list
>> *Assunto:* Re: [OpenSIPS-Users] Register timeout question.
>> Hi Rodrigo,
>>
>> "opensipsctl online" simply shows the registration cache (who 
>> registered and for how long), but without actively checking if the 
>> registered device is still alive.
>>
>> It simply shows the who's registered based on the received REGISTER 
>> requests. The list is realtime updated based on these REGISTERs.
>>
>> But if a device registers for 60 minutes and it drops form network 
>> after 30 minutes, the device will still be shown as online after 40 
>> mins (up to 60 mins, when the registration will expire).
>>
>> Best regards,
>> Bogdan-Andrei Iancu
>> OpenSIPS Founder and Developer
>> http://www.opensips-solutions.com
>> On 28.08.2015 17:19, Rodrigo Pimenta Carvalho wrote:
>>>
>>> Hi Bogdan.
>>>
>>>
>>> Thank you for the reply.
>>>
>>>
>>> What about the line command 'opensipsctl online'?  This command 
>>> shows me who is online, so it has some way to detect who is and who 
>>> is not online in a moment.
>>>
>>>
>>> How this command can figure out who is currently online? If some 
>>> peer UAC become offline, does such command return an updated list 
>>> immediately, or does it take some seconds to start returning an 
>>> update list? If it take some seconds, does it depend on the 
>>> periodicity of SIP Register messages from such UAC?
>>>
>>>
>>> I need to know how long does it take to get an update online peers 
>>> list, by means of the 'opensipsctl online' command, after someone 
>>> becoming offline.
>>>
>>>
>>> Best regards.
>>>
>>>
>>> RODRIGO PIMENTA CARVALHO
>>> Inatel Competence Center
>>> Software
>>> Ph: +55 35 3471 9200 RAMAL 979
>>>
>>>
>>> ------------------------------------------------------------------------
>>> *De:* Bogdan-Andrei Iancu <bogdan at opensips.org>
>>> *Enviado:* sexta-feira, 28 de agosto de 2015 11:00
>>> *Para:* OpenSIPS users mailling list; Rodrigo Pimenta Carvalho
>>> *Assunto:* Re: [OpenSIPS-Users] Register timeout question.
>>> Hi Rodrigo,
>>>
>>> Currently there is no way for OpenSIPS to check the status of the 
>>> active registrations. But we have an internal PR with such feature - 
>>> doing SIP pinging to the registered contacts and if no answer, to 
>>> auto unregister the contact. Most probably it will be uploaded on 
>>> 2.2 branch in the next week.
>>>
>>> Regards,
>>> Bogdan-Andrei Iancu
>>> OpenSIPS Founder and Developer
>>> http://www.opensips-solutions.com
>>> On 28.08.2015 16:27, Rodrigo Pimenta Carvalho wrote:
>>>>
>>>>
>>>> Hi.
>>>>
>>>>
>>>> Let´s  suppose there are some peers online in my OpenSIPS.
>>>>
>>>> For my project, whether a peer (UAC) become offline, my OpenSIPS 
>>>> must detect it in 10 seconds.
>>>>
>>>> Is there a way to detect it by means of some kind of SIP Register 
>>>> timeout configuration? How to configure OpenSIPS for this objective?
>>>>
>>>>
>>>> Any hint will be very helpful!
>>>>
>>>>
>>>> Best regards.
>>>>
>>>>
>>>>
>>>>
>>>> RODRIGO PIMENTA CARVALHO
>>>> Inatel Competence Center
>>>> Software
>>>> Ph: +55 35 3471 9200 RAMAL 979
>>>>
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users at lists.opensips.org
>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>
>>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20150831/212d1b95/attachment.htm>