[OpenSIPS-Users] dialog time out not working
Răzvan Crainea
razvan at opensips.org
Wed Jun 25 09:32:20 CEST 2014
Hi, Salmuel!
Actually the dialog timeout is set to 120, but afterwards it is
overwritten by the SST module. Can you remove the SST module from your
script and re-test?
Best regards,
Razvan Crainea
OpenSIPS Core Developer
http://www.opensips-solutions.com
On 06/24/2014 04:09 PM, Samuel Muller wrote:
> Hello Bogdan, Razvan,
>
> A small update concerning the dialog time-out.
> It's not working, again. I used the latest git version for my tests
> (and yes Razvan, it fixed the var print).
>
> Tried with :
> modparam("tm","own_timer_proc",2), the 1, then disabling the stuff, no changes.
>
>
> Here's all the relevant info :
>
> => modules config
>
> modparam("tm","fr_timeout",10) # default 30 sec
> modparam("tm","fr_inv_timeout",60) # default 120 sec
> modparam("tm","wt_timer",5) # default 5 sec
> modparam("tm","delete_timer",2) # default 2 sec
> modparam("tm","T1_timer",500) # default 500 msec
> modparam("tm","T2_timer",4000) # default 4000 msec
> #modparam("tm","own_timer_proc",2) # default 0 (disabled)
> modparam("tm","ruri_matching",1)
> modparam("tm","via1_matching",1)
> modparam("tm","unix_tx_timeout",2)
> modparam("tm","restart_fr_on_each_reply",1)
> modparam("tm","pass_provisional_replies",0)
> modparam("tm","syn_branch",1)
> modparam("tm","onreply_avp_mode",1)
> modparam("tm","disable_6xx_block",0)
> modparam("tm","enable_stats",1)
> modparam("tm","minor_branch_flag","MINOR_BFLAG")
> modparam("dialog","enable_stats",1)
> modparam("dialog","hash_size",4096)
> modparam("dialog","log_profile_hash_size",4)
> modparam("dialog","rr_param","did")
> modparam("dialog","default_timeout",3600)
> modparam("dialog","dlg_match_mode",1)
> modparam("dialog","db_mode",0)
> modparam("dialog","ping_interval",30)
> modparam("sst","enable_stats",1)
> modparam("sst","min_se",1800)
> modparam("sst","sst_interval",0)
> modparam("sst","reject_to_small",0)
> modparam("sst","sst_flag","SST")
>
> => routing logic config
>
> if (is_method("INVITE")) {
> # SST module see dead people ...
> setflag(SST);
> # create the dialog
> create_dialog("B");
> # set the session timeout
> if (issflagset(CALLER_FOUND) && $(var(caller_stimeout){s.len}) != 0) {
> $DLG_timeout = $(var(caller_stimeout){s.int});
> } else {
> $DLG_timeout = 3600;
> }
> xlog("L_NOTICE","$var(log) invite: caller session timeout set
> to $var(caller_stimeout) ($DLG_timeout) sec");
> # store a few values
> store_dlg_value("callid","$ci");
> store_dlg_value("dlgid","$DLG_did");
> }
>
>
> => debug logs (INVITE)
>
> ...
> log[495]: DBG:dialog:w_create_dialog2: bye on timeout activated
> log[495]: DBG:dialog:build_new_dlg: new dialog 0x7fb82da3e730
> (c=da71a953f21b-7761pm3b03ux,f=sip:3933 at mysipdomain.com,t=sip:3101 at mysipdomain.com,ft=s3flexpnkz)
> on hash 3263
> log[495]: DBG:core:parse_params: Parsing params for:[reg-id=1]
> log[495]: DBG:core:parse_headers: flags=ffffffffffffffff
> log[495]: DBG:core:print_rr_body: current rr is
> <sip:10.0.0.95;lr;ftag=s3flexpnkz;rr=vrf5411>
> log[495]: DBG:core:print_rr_body: current rr is
> <sip:192.168.0.33:6060;lr;ftag=s3flexpnkz;rr=sas>
> log[495]: DBG:core:print_rr_body: skipping 0 route records
> log[495]: DBG:core:print_rr_body: out rr
> [<sip:10.0.0.95;lr;ftag=s3flexpnkz;rr=vrf5411>,<sip:192.168.0.33:6060;lr;ftag=s3flexpnkz;rr=sas>]
> log[495]: DBG:core:print_rr_body: we have 2 records
> log[495]: DBG:dialog:init_leg_info: route_set
> <sip:10.0.0.95;lr;ftag=s3flexpnkz;rr=vrf5411>,<sip:192.168.0.33:6060;lr;ftag=s3flexpnkz;rr=sas>,
> contact sip:3933 at 192.168.0.108:6060, cseq 2 and bind_addr
> udp:10.0.0.92:5060
> log[495]: DBG:dialog:dlg_add_leg_info: set leg 0 for 0x7fb82da3e730:
> tag=<s3flexpnkz> rcseq=<0>
> log[495]: DBG:dialog:link_dlg: ref dlg 0x7fb82da3e730 with 3 -> 3 in
> h_entry 0x7fb82d8e6d80 - 3263
> log[495]: DBG:rr:add_rr_param: adding (;did=fbc.4e0c3935) 0x7fb8565230c0
> log[495]: DBG:core:comp_scriptvar: int 29 : 3 / 0
> log[495]: da71a953f21b-7761pm3b03ux invite: caller session timeout set
> to 120 (120) sec
> log[495]: DBG:dialog:new_dlg_val: inserting <callid>=<da71a953f21b-7761pm3b03ux>
> log[495]: DBG:dialog:new_dlg_val: inserting <dlgid>=<3263:1402192100>
> ...
> log[495]: DBG:dialog:new_dlg_val: inserting <accX_created>=<?q?S>
> log[495]: DBG:rr:is_direction: param ftag not found
> log[495]: DBG:tm:run_reqin_callbacks: trans=0x7fb82da3fd00, callback
> type 1, id 0 entered
> log[495]: DBG:dialog:run_create_callbacks: dialog=0x7fb82da3e730
> log[495]: DBG:core:parse_headers: flags=ffffffffffffffff
> log[495]: DBG:core:parse_supported: parsing [Supported: timer, 100rel,
> replaces, from-change] 0x7fb856520898
> log[495]: DBG:sst:setup_dialog_callbacks: Adding callback
> DLGCB_FAILED|DLGCB_TERMINATED|DLGCB_EXPIRED
> log[495]: DBG:sst:setup_dialog_callbacks: Adding callback DLGCB_REQ_WITHIN
> log[495]: DBG:sst:setup_dialog_callbacks: Adding callback
> DLGCB_RESPONSE_FWDED|DLGCB_RESPONSE_WITHIN
> log[495]: DBG:sst:setup_dialog_callbacks: Adding mi handler
> log[495]: DBG:sst:set_dialog_lifetime: set dialog timeout value to 1800
> log[495]: DBG:dialog:dlg_onreq: t hash_index = 27891, t label = 289580432
> ...
>
> => debug logs (PRACK)
>
> ...
> log[497]: DBG:dialog:dlg_onroute: route param is 'fbc.4e0c3935' (len=12)
> log[497]: DBG:dialog:lookup_dlg: ref dlg 0x7fb82da3e730 with 1 -> 3
> log[497]: DBG:dialog:lookup_dlg: dialog id=1402192100 found on entry 3263
> log[497]: DBG:core:parse_headers: flags=58
> log[497]: DBG:dialog:next_state_dlg: dialog 0x7fb82da3e730 changed
> from state 2 to state 2, due event 5
> log[497]: DBG:dialog:run_dlg_callbacks: dialog=0x7fb82da3e730, type=16
> log[497]: DBG:sst:sst_dialog_request_within_CB: ACK/PRACK workaround
> applied!1800
> log[497]: DBG:sst:set_dialog_lifetime: set dialog timeout value to 1800
> log[497]: DBG:dialog:dlg_onroute: EARLY event 5 successfully processed
> (dst_leg=1)
> log[497]: DBG:dialog:switch_cseqs: prev_cseq = 2 for leg 1
> log[497]: DBG:dialog:dlg_update_cseq: dlg 0x7fb82da3e730[1]: cseq is 3
> ...
>
> and so on for all the others sip messages.
>
>
> Thanks for your help, really needed it actually.
>
>
> Samuel MULLER
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
More information about the Users
mailing list