[OpenSIPS-Users] fr_inv_timeout

[bluerain]

Ok, so I tried this timer thinking that it would shorten my PDD out to
multiple carriers.  But I guess this timer control when the call "answer"? 
So anything after INVITE (e.g. 100 trying, 180 ringing or 183) it will
ignore?  So if the timer set to 5 seconds, it will try that SIP route for 5
seconds UNTIL IT CONNECT. 

So where is the timer that I can control the time between 100 trying and 180
(or any message after 100 trying)? 

I have multiple carriers (on outbound calls) that I LCR, some of the carrier
have over 10 seconds PDD (which in this case, they give us a 100 trying and
then maybe 10 seconds later, give us 180 ringing, thus 10 seconds of dead
air).  So I would like to control that problem by cutting the PDD short at
OpenSIP where opensips can say that if is over XX seconds after 100 trying
from carrier, send a timeout error code to the media gateway (in my case,
asterisk) and have asterisk server try the next carrier. 

Thx in advance.



--
View this message in context: http://opensips-open-sip-server.1449251.n2.nabble.com/fr-inv-timeout-tp7594633.html
Sent from the OpenSIPS - Users mailing list archive at Nabble.com.