[OpenSIPS-Users] opensips and syslog facility/level
Oleksandr Kunytsia
okunia at gmail.com
Tue Aug 12 23:48:04 CEST 2014
Hello Liviu,
I've got local developer to test changes, so I can test now your
suggestions:
I started with such change:
---------------------------
startup_route {
#xlog("using localhost for routing");
xlog("L_INFO"," L-INFO using localhost for routing");
xlog("L_NOTICE"," L_NOTICE using localhost for routing");
xlog(" no LEVEL using localhost for routing");
}
---------------------------
After I restarted opensips I got only one line in logs:
==> /var/log/sips.log <==
local2.err<147>: Aug 12 14:44:05 sip1 /usr/sbin/opensips[28615]: no LEVEL
using localhost for routing
--------
What is the reason of that?
# /usr/sbin/opensips -V
version: opensips 1.7.1-tls (x86_64/linux)
flags: STATS: Off, USE_IPV6, USE_TCP, USE_TLS, DISABLE_NAGLE, USE_MCAST,
SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT
ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16,
MAX_URI_SIZE 1024, BUF_SIZE 65535
poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
svnrevision: unknown
@(#) $Id: main.c 8537 2011-11-08 17:02:11Z bogdan_iancu $
main.c compiled on 22:15:48 Nov 23 2011 with gcc 4.1.2
/Oleksandr
On Thu, Aug 7, 2014 at 2:25 PM, Liviu Chircu <liviu at opensips.org> wrote:
> I understand what's happening now. The thing is, if you use xlog() with
> only 1 parameter in your script, that message will simply go to syslog's
> LOG_ERR (it should be visible!).
>
> You can control the logging level within your script with xlog("L_NOTICE",
> ".....") or xlog("L_DBG", "...") for example.
>
> Best regards,
>
> Liviu Chircu
> OpenSIPS Developerhttp://www.opensips-solutions.com
>
> On 08/06/2014 08:29 PM, Oleksandr Kunytsia wrote:
>
> on my config debug set to 0:
> ----
>
> #
> # GLOBALS
> #
> debug=0
> log_facility=LOG_LOCAL2
> log_stderror=no
> ------
>
>
> I also configured rsyslog for saving LOCAL2 to file with specific
> template:
> ----
> $template precise,"%pri-text%: %timegenerated% %HOSTNAME%
> %syslogtag%%msg%\n"
> local2.* -/var/log/sips.log;precise
> ----
>
> extract from /var/log/sips.log:
>
> local2.err<147>: Aug 6 17:18:52 r-sip opensips[5588]: new-int
> INVITE[PhoneNUM,PhoneNUM57]: SIP 404 after 19161ms from IP.ADD.RE.SS
> local2.err<147>: Aug 6 17:18:52 r-sip opensips[5612]: r-lt1
> INVITE[+1PhoneNUM,PhoneNUM1]: SIP 180 after 25905ms from IP.ADD.RE.SS
> local2.err<147>: Aug 6 17:18:52 r-sip opensips[5592]: r-lt1
> INVITE[+1PhoneNUM,PhoneNUM5]: relayed IP.ADD.RE.SS outbound to IP.ADD.RE.SS
> local2.err<147>: Aug 6 17:18:52 r-sip opensips[5600]: r-in1
> INVITE[+1PhoneNUM,PhoneNUM7]: relayed IP.ADD.RE.SS outbound to IP.ADD.RE.SS
> local2.err<147>: Aug 6 17:18:52 r-sip opensips[5588]: new-int
> INVITE[PhoneNUM7,PhoneNUM]: relayed IP.ADD.RE.SS outbound to IP.ADD.RE.SS
> local2.err<147>: Aug 6 17:18:52 r-sip opensips[5560]: r-in1
> INVITE[+PhoneNUM,PhoneNUM437]: SIP 100 after 3ms from IP.ADD.RE.SS
> local2.err<147>: Aug 6 17:18:52 r-sip opensips[5650]: r-lt1
> INVITE[800PhoneNUM,PhoneNUM248]: relayed IP.ADD.RE.SS outbound to
> IP.ADD.RE.SS
> local2.err<147>: Aug 6 17:18:52 r-sip opensips[5622]: r-lt1
> INVITE[+PhoneNUM,PhoneNUM015]: SIP 100 after 9ms from IP.ADD.RE.SS
> local2.err<147>: Aug 6 17:18:52 r-sip opensips[5624]: Broadvox
> BYE[PhoneNUM,PhoneNUM00] existing dialog
> local2.err<147>: Aug 6 17:18:52 r-sip opensips[5604]: r-in1
> INVITE[80PhoneNUM,PhoneNUM213]: SIP 183 after 7270ms from IP.ADD.RE.SS
>
>
> On Wed, Aug 6, 2014 at 11:17 AM, Muhammad Shahzad <shaheryarkh at gmail.com>
> wrote:
>
>> You can set opensips log level using "debug" parameter.
>>
>> http://www.opensips.org/Documentation/Script-CoreParameters-1-11#toc35
>>
>> Also make sure your syslog service is configured to send local2.* logs
>> to the log file(s) where you want to see them. i.e. to see all opensips
>> logs file named opensips.log set /etc/rsyslog.conf to have entry like this,
>>
>> local2.* /var/log/opensips.log
>>
>> Then restart the service.
>>
>> Hope this helps.
>>
>> Thank you.
>>
>>
>>
>>
>> On Wed, Aug 6, 2014 at 10:49 AM, Oleksandr Kunytsia <okunia at gmail.com>
>> wrote:
>>
>>> Hello,
>>>
>>> Logging of my opensips looks like the following:
>>>
>>> ----cut----
>>> log_facility=LOG_LOCAL2
>>> log_stderror=no
>>> ----cut----
>>>
>>> Opensips sends logging information as LOCAL2.error messages,
>>>
>>> How to configure to send messages with another log_level? e.g.
>>> local2.info?
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users at lists.opensips.org
>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>
>>>
>>
>> _______________________________________________
>> Users mailing list
>> Users at lists.opensips.org
>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>>
>
>
> _______________________________________________
> Users mailing listUsers at lists.opensips.orghttp://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20140812/2d2bb67b/attachment.htm>
More information about the Users
mailing list