[OpenSIPS-Users] Error "ERROR:core:get_out_socket: no socket found"

[Vladimir Vakulov]

Good afternoon.
Check for the version 1.10 the same problem occurs.

Sep 13 11:52:10 Tel-Support8 /sbin/opensips[5836]: ERROR:core:get_out_socket: no socket found
Sep 13 11:52:10 Tel-Support8 /sbin/opensips[5836]: ERROR:tm:update_uac_dst: failed to fwd to af 2, proto 1  (no corresponding listening socket)

[root at Tel-Support8 ~]# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:50:56:ab:01:4b brd ff:ff:ff:ff:ff:ff
    inet 10.90.249.4/22 brd 10.90.251.255 scope global eth0
    inet 10.90.249.10/22 brd 10.90.251.255 scope global secondary eth0
    inet6 fe80::250:56ff:feab:14b/64 scope link
       valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:50:56:ab:01:4f brd ff:ff:ff:ff:ff:ff
    inet 192.168.120.4/24 brd 192.168.120.255 scope global eth1
    inet 192.168.120.10/24 brd 192.168.120.255 scope global secondary eth1
    inet6 fe80::250:56ff:feab:14f/64 scope link
       valid_lft forever preferred_lft forever

[root at Tel-Support8 ~]# netstat -nlp | grep opensips
udp        0      0 127.0.0.1:5060              0.0.0.0:*                               5832/opensips  
udp        0      0 192.168.120.10:5060         0.0.0.0:*                               5832/opensips  
udp        0      0 10.90.249.10:5060           0.0.0.0:*                               5832/opensips  

Vladimir

-----Original Message-----
From: Vladimir Vakulov 
Sent: Tuesday, September 10, 2013 5:07 PM
To: 'users at lists.opensips.org'
Subject: Error "ERROR:core:get_out_socket: no socket found"

Good afternoon.
If you try to make a call
Asterisk 1 -> Opensips -> Asterisk 2 . 
But Opensips returns the error "ERROR: core: get_out_socket: no socket found", and it is not clear why it appears .

Can you please tell me which way to look.

In the lab, I use the following scheme :
Asterisk (10.90.249.1) - (10.90.249.10) Opensips (192.168.120.10) - (192.168.120.5) Asterisk

Regards, Vladimir.