[OpenSIPS-Users] AVP-based uac_auth in b2bua

Ovidiu Sas osas at voipembedded.com
Tue Nov 19 01:36:58 CET 2013


Did you set the onreply_avp_mode for tm:
http://www.opensips.org/html/docs/modules/devel/tm.html#id293972


On Monday, November 18, 2013, Jeff Pyle wrote:

> It's 1.10 pulled from git a few hours ago.  Debian 7 64-bit.
>
> The AVPs are set prior to calling the b2b scenario:
>
> modparam("uac_auth","auth_realm_avp",   "$avp(auth_realm)")
> modparam("uac_auth","auth_username_avp","$avp(auth_user)")
> modparam("uac_auth","auth_password_avp","$avp(auth_pass)")
> #modparam("uac_auth","credential","UserName:AuthRealm123:SuperS33cret")
>
> route {
>   ...
>         $avp(auth_user)  := "UserName";
>         $avp(auth_pass)  := "SuperS33cret";
>         $avp(auth_realm) := "AuthRealm123";
>
>         b2b_init_request("top hiding/t105");
> ...
> }
>
>
> debugs:
>
> Nov 18 18:07:55 [26004] DBG:b2b_entities:b2b_tm_cback: Received reply
> [407] for dialog [0x7ff941c13268], method [INVITE]
> Nov 18 18:07:55 [26004] DBG:tm:t_unref_cell: UNREF_UNSAFE:
> [0x7ff941c18448] after is 1
> Nov 18 18:07:55 [26004] DBG:b2b_entities:b2b_tm_cback:
> dlg=[0x7ff941c13268], uac_tran=NULL
> Nov 18 18:07:55 [26004] DBG:core:parse_authenticate_body:
> <realm>="AuthRealm123" state=2
> Nov 18 18:07:55 [26004] DBG:core:parse_authenticate_body:
> <nonce>="528a9de900013e5f13fe985df4a9848356a1f937207ecfe4" state=3
> Nov 18 18:07:55 [26004] DBG:core:parse_authenticate_body: <qop>="auth"
> state=1
> Nov 18 18:07:55 [26004] DBG:b2b_logic:b2bl_parse_key: hash_index = [472]
>  - local_index= [0]
>
>
>
> The following (successful) debugs occur if I uncomment the credential
> modparam visible above:
>
> Nov 18 18:15:45 [26118] DBG:b2b_entities:b2b_tm_cback:
> dlg=[0x7f8a06744c30], uac_tran=NULL
> Nov 18 18:15:45 [26118] DBG:core:parse_authenticate_body:
> <realm>="66.94.76.24" state=2
> Nov 18 18:15:45 [26118] DBG:core:parse_authenticate_body:
> <nonce>="528a9fbf00014297ef8f2335679f0310537c85fe2b007186" state=3
> Nov 18 18:15:45 [26118] DBG:core:parse_authenticate_body: <qop>="auth"
> state=1
> Nov 18 18:15:45 [26118] DBG:uac_auth:build_authorization_hdr: auth_hdr is
> <Proxy-Authorization: Digest username="UserName", realm="AuthRealm123",
> nonce="528a9fbf00014297ef8f2335679f0310537c85fe2b007186",
> uri="sip:2165551212 at domain", qop=auth, nc=00000001, cnonce="3105687311",
> response="ef047011046690b6eea99c7848de499a", algorithm=MD5
> >
> Nov 18 18:15:45 [26118] DBG:b2b_entities:b2b_tm_cback:
> [Proxy-Authorization: Digest ...]
> Nov 18 18:15:45 [26118] DBG:b2b_entities:b2b_tm_cback: uri [...]
>
>
>
> I tried to follow the source to isolate the failing mechanism.  I arrived
> at modules/uac_auth/auth.c.  In get_avp_credential() at line 199:
>
>         avp = search_first_avp( realm_avp_type, realm_avp_name, &val, 0);
>         if ( avp==NULL || (avp->flags&AVP_VAL_STR)==0 || val.s.len<=0 )
>                 return 0;
>
> In my case I've discovered avp==NULL so the if-statement returns 0.
>  avp==NULL because in the search_first_avp() at line 346 of usr_avp.c:
>
>                 if (*crt_avps==0)
>                         return 0;
>
> And it's game over.  I can't discern what causes this.  I'm already way in
> over my pay grade.  :)
>
>
> - Jeff
>
>
> On Mon, Nov 18, 2013 at 6:02 PM, Ovidiu Sas <osas at voipembedded.com> wrote:
>
> Can you post the debug logs and let us know which version of opensips
> are you running?
> Also, make sure that you set the credentials in AVPs before invoking
> the b2b call.
>
> Thanks,
> Ovidiu
>
> On Mon, Nov 18, 2013 at 5:11 PM, Jeff Pyle <jpyle at fidelityvoice.com>
> wrote:
> > This functionality has become key for my configuration.  I've done some
> > digging today.  Here's what I know.
> >
> > b2b_entities' auth call gets to around line 347 of usr_avp.c and fails:
> >
> >                 if (*crt_avps==0)
> >                         return 0;
> >
> > Programming is not my strength.  Any thoughts what might cause this
> > condition, or how it might be related b2b_entities' ability to process an
> > auth request?
> >
> >
> > - Jeff
> >
> >
> >
> >
> > On Wed, Nov 13, 2013 at 6:03 PM, Jeff Pyle <jpyle at fidelityvoice.com>
> wrote:
> >>
> >> Hi Ovidiu,
> >>
> >> It does not.  At least not for me.  Here are some snippets of my config
> >> file:
> >>
> >> modparam("uac_auth","auth_realm_avp",  "$avp(auth_realm)")
> >> modparam("uac_auth","auth_username_avp","$avp(auth_user)")
> >> modparam("uac_auth","auth_password_avp","$avp(auth_pass)")
> >>
> >>
> #modparam("uac_auth","credential","valid-username:appropriate-realm:valid-password")
> >>
> >> route {
> >>
> >>   ... sanity checks, etc ...
> >>
> >>         $avp(auth_realm) := "appropriate-realm";
> >>         $avp(auth_user)  := "valid-username";
> >>         $avp(auth_pass)  := "valid-password";
> >>
> >>         if !(b2b_init_request("top hiding/t105")) {
> >>                 xlog("L_ERR", "** b2b_init  failed - - S=$si:$sp T=$tU
> >> F=$fU C=$ci\n");
> >>                 send_reply("500", "Internal Server Error");
> >>         }
> >>         exit;
> >> }
> >>
> >>
> >> Configured like this, the 407 gets passed back to the client.  If I
> >> uncomment the 'credential' modparam, the B2B will send an INVITE with
> the
> >> correct auth.
> >>
> >> The same uac_auth config with the same AVPs work correctly if I use
> >> uac_auth() on a failure_route in a pure proxy config.  That's why I'm
> >> confused about it not working with the B2B.  I looked through the
> source and
> >> as best I can tell the same functions are called the same way for each.
> >>
> >> Ok, let me be specific on that last point.  The client to this B2B
> >> instance is another Opensips instance with proxy-only commands, most
> notably
> >> rtpproxy.  That's where I have uac_auth() working today.  With that I
> call
> >> the scenario here as "top hiding/at105" (note the "a") to intentionally
> pass
> >> the 407 back to the proxy config.  It works.  Ideally, I'd prefer the
> B2B
> >> scenario here field the 407.
> >>
> >>
> >> - Jeff
> >>
> >>
> >> On Wed, Nov 13, 2013 at 4:34 PM, Ovidiu Sas <osas at voipembedded.com>
> wrote:
> >>>
> >>> If you set the AVPs before creating the b2b call, it should work on
> 1.10.
> >>>
> >>> Regards,
> >>> Ovidiu Sas
> >>>
> >>> On Tue, Nov 12, 2013 at 11:16 PM, Jeff Pyle <jpyle at fidelityvoice.com>
> >>> wrote:
> >>> > I was about to let this one go when I found "B2B module gets
> visibility
> >>> > to
> >>> > credentials defined via AVPs" on the About Version 1.10 page.  In my
> >>> > case it
> >>> > works only if I define the 'credential' modparam for uac_auth.
> >>> >
>
>

-- 
VoIP Embedded, Inc.
http://www.voipembedded.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20131118/27e603c3/attachment.htm>


More information about the Users mailing list