[OpenSIPS-Users] ACK Loop when changing contact on_reply: Please Help!!!

[Nick Khamis]

My approach was covered here:

http://openser.org/pipermail/users/2008-September/000473.html

Will use record_route_preset(public vs. private) in our logic, and
change back the value of advertised address back to the private IP for
local traffic to route logically....

Thanks Again Bogdan!

Nick.

On 3/19/13, Nick Khamis <symack at gmail.com> wrote:
> Hello Bogdan,
>
> Thank you so much for your response. We did have an RR problem that
> did not allow for an "ACK" to our "200 OK". Our solution was to change
> "advertised_address" to use the public IP instead of the local net,
> which seemed to get the RR problem solved. The server related global
> parameters we are using are as follow:
>
> alias=<public ip>
> auto_aliases=no
> disable_dns_failover=yes
> sip_warning=no
>
> port=5060
> listen=udp:192.168.2.5:5060
> advertised_address=<public ip>
>
> This got the external ACK responses to our 200, but only one way audio
> (probably RTP proxy related, and started a new message for that
> issue).
>
> The question is, Should I change "advertised_address" back to private
> IP, and use "record_route_preset" instead? In the meanwhile, I will
> try it.
>
> Nick.
>