[OpenSIPS-Users] 回复： 回复： 回复： freeradiusd-2.2.0 Unsupported Acct-Status-Type= 15
Bogdan-Andrei Iancu
bogdan at opensips.org
Fri Jul 5 11:33:44 CEST 2013
So, it what logs (from what application) do you see the error about the
unsupported values ? that application must have the value in the dictionary.
Regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com
On 07/05/2013 03:08 AM, ㄨ冷se灬 wrote:
> hello:
> VALUE Acct-Status-Type Failed 15 #
> RFC2866, acc
> I'm sure, the "Failed" value had include with
> dictionary.opensips both with radiuscliend-ng and radius server.
>
>
>
> ------------------ 原始邮件 ------------------
> *发件人:* "Bogdan-Andrei Iancu"<bogdan at opensips.org>;
> *发送时间:* 2013年7月4日(星期四) 晚上11:44
> *收件人:* "OpenSIPS users mailling list"<users at lists.opensips.org>;
> *抄送:* "ㄨ冷se灬"<291490117 at qq.com>;
> *主题:* Re: [OpenSIPS-Users] 回复： 回复： freeradiusd-2.2.0
> Unsupported Acct-Status-Type= 15
>
> Hello,
>
> The missing value should be provided by the dictionary.sip file (that
> comes with radius client library) - be sure you are using that
> dictionary on the server side too.
>
> Regards,
> Bogdan-Andrei Iancu
> OpenSIPS Founder and Developer
> http://www.opensips-solutions.com
>
> On 07/04/2013 03:44 AM, ㄨ冷se灬 wrote:
>> there is no errors
>>
>> from log I can see only like:
>>
>> [sql] Unsupported Acct-Status-Type = 15
>> ++[sql] returns noop
>>
>> ------------------ 原始邮 件 ------------------
>> *发件人:* "Laszlo"<laszlo at voipfreak.net>;
>> *发送时间:* 2013年7月3日(星期三) 晚上6:16
>> *收件人:* "OpenSIPS users mailling list"<users at lists.opensips.org>;
>> *主题:* Re: [OpenSIPS-Users]回复： freeradiusd-2.2.0 Unsupported
>> Acct-Status-Type= 15
>>
>> What errors did you get?
>>
>> 2013.07.03. 11:07, "ㄨ冷se灬" <291490117 at qq.com
>> <mailto:291490117 at qq.com>> ezt írta:
>>
>> readme.txt show me:
>> Patch for
>> - Added support for acct type Failed (15)
>> - Added MySQL stored procedures support
>> - Removed Cisco hack that causes errors in radius.log if acctsessiontime= 0
>>
>> but the patch isn't working.
>>
>>
>>
>> ------------------ 原始邮 件 ------------------
>> *发件人:* "Laszlo"<laszlo at voipfreak.net
>> <mailto:laszlo at voipfreak.net>>;
>> *发送时间:* 2013年7月3日(星期三) 下午3:30
>> *收件人:* "OpenSIPS users mailling list"<users at lists.opensips.org
>> <mailto:users at lists.opensips.org>>;
>> *主题:* Re: [OpenSIPS-Users] freeradiusd-2.2.0 Unsupported
>> Acct-Status-Type= 15
>>
>> Did you compile freeradius from source? If so, you will need to
>> patch it and then recompile freeradius.
>> The patch can be found here:
>> http://download.dns-hosting.info/CDRTool/contrib/freeradius-brandinger/
>>
>>
>> These are quite old patches, if the most recent patch isn't
>> working for you, then you will need to go through the patching
>> logic manually. It will involve editing the following files:
>>
>> - freeradius/src/include/radius.h
>> - freeradius/src/modules/rlm_sql/conf.h
>> - freeradius/src/modules/rlm_sql/rlm_sql.c
>> - the config file under freeradius's /etc directory
>>
>> Look at the lines with the "+" lines in the patch file.
>>
>>
>> -Laszlo
>>
>>
>>
>> 2013/7/3 ㄨ冷se灬 <291490117 at qq.com <mailto:291490117 at qq.com>>
>>
>> dear all:
>> I update my freeradius from v1.1.8 to v2.2.0.
>> when I use v2.2.0 ,I can’t see unsuccessfully
>> calls(like cancel,etc)
>>
>> and radius got this log:
>> rad_recv: Accounting-Request packet from host 10.1.17.71 port
>> 47962, id=165, length=510
>> Acct-Status-Type = Failed
>> Service-Type = IAPP-Register
>> Sip-Response-Code = 487
>> Sip-Method = Invite
>> Event-Timestamp = "Jul 3 2013 08:55:14 CST"
>> Sip-From-Tag = "202199366"
>> Sip-To-Tag = "3c11a175"
>> Acct-Session-Id =
>> "261192415021484-264973041726312 at 10.49.2.236
>> <mailto:261192415021484-264973041726312 at 10.49.2.236>"
>> User-Name = "66687113 at 10.1.17.71
>> <mailto:66687113 at 10.1.17.71>"
>> Billing-Party = "66687113 at 10.1.17.71
>> <mailto:66687113 at 10.1.17.71>"
>> Calling-Station-Id = "66687113 at 10.1.17.71
>> <mailto:66687113 at 10.1.17.71>"
>> Called-Station-Id = "sip:66687114 at c.corp.esocc.com:5060
>> <http://sip:66687114@c.corp.esocc.com:5060>"
>> Sip-Translated-Request-URI =
>> "sip:66687114 at 221.228.228.14:58709;rinstance=e3a8a78bae83cfb9"
>> Source-IP = "221.228.228.14"
>> Source-Port = "32670"
>> SIP-Proxy-IP = "10.1.17.71"
>> Canonical-URI =
>> "sip:008666687114 at 221.228.228.14:58709;rinstance=e3a8a78bae83cfb9"
>> User-Agent = "Voip Phone 1.0"
>> Contact = "<sip:66687113 at 221.228.228.14:32670
>> <http://sip:66687113@221.228.228.14:32670>>"
>> From-Header = "66687113
>> <sip:66687113 at c.corp.esocc.com:5060
>> <http://sip:66687113@c.corp.esocc.com:5060>>;tag=202199366"
>> NAS-Port = 5060
>> Acct-Delay-Time = 0
>> NAS-IP-Address = 10.1.17.71
>> # Executing section preacct from file
>> /usr/local/freeradius/etc/raddb/radiusd.conf
>> +- entering group preacct {...}
>> ++[preprocess] returns ok
>> # Executing section accounting from file
>> /usr/local/freeradius/etc/raddb/radiusd.conf
>> +- entering group accounting {...}
>> [detail] expand:
>> /usr/local/freeradius/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d
>> ->
>> /usr/local/freeradius/var/log/radius/radacct/10.1.17.71/detail-20130703
>> <http://10.1.17.71/detail-20130703>
>> [detail]
>> /usr/local/freeradius/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d
>> expands to
>> /usr/local/freeradius/var/log/radius/radacct/10.1.17.71/detail-20130703
>> <http://10.1.17.71/detail-20130703>
>> [detail] expand: %t -> Wed Jul 3 08:55:14 2013
>> ++[detail] returns ok
>> [sql] Unsupported Acct-Status-Type = 15
>> ++[sql] returns noop
>> Sending Accounting-Response of id 165 to 10.1.17.71 port 47962
>> Finished request 1.
>> Cleaning up request 1 ID 165 with timestamp +9
>> Going to the next request
>> Waking up in 3.4 seconds.
>> Cleaning up request 0 ID 164 with timestamp +7
>> Ready to process requests.
>>
>>
>> It seem Unsupported Acct-Status-Type = 15,and I check
>> my dictionary
>> VALUE Acct-Status-Type Failed 15
>> # RFC2866, acc
>>
>>
>> I'm sure there's a configuration step I've missed.
>> Could anyone suggest some
>> other things to check?
>>
>>
>>
>>
>> Thanks
>> vic.xiang
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users at lists.opensips.org <mailto:Users at lists.opensips.org>
>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>>
>>
>>
>> --
>>
>> --
>> Kind regards,
>> Laszlo Bekesi
>> http://voipfreak.net
>>
>> _______________________________________________
>> Users mailing list
>> Users at lists.opensips.org <mailto:Users at lists.opensips.org>
>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users at lists.opensips.org
>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20130705/44545b30/attachment-0001.htm>
More information about the Users
mailing list