[OpenSIPS-Users] 回复： 回复： freeradiusd-2.2.0 Unsupported Acct-Status-Type= 15
Bogdan-Andrei Iancu
bogdan at opensips.org
Thu Jul 4 17:44:39 CEST 2013
Hello,
The missing value should be provided by the dictionary.sip file (that
comes with radius client library) - be sure you are using that
dictionary on the server side too.
Regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com
On 07/04/2013 03:44 AM, ㄨ冷se灬 wrote:
> there is no errors
>
> from log I can see only like:
>
> [sql] Unsupported Acct-Status-Type = 15
> ++[sql] returns noop
>
> ------------------ 原始邮件 ------------------
> *发件人:* "Laszlo"<laszlo at voipfreak.net>;
> *发送时间:* 2013年7月3日(星期三) 晚上6:16
> *收件人:* "OpenSIPS users mailling list"<users at lists.opensips.org>;
> *主题:* Re: [OpenSIPS-Users]回复： freeradiusd-2.2.0 Unsupported
> Acct-Status-Type= 15
>
> What errors did you get?
>
> 2013.07.03. 11:07, "ㄨ冷se灬" <291490117 at qq.com
> <mailto:291490117 at qq.com>> ezt írta:
>
> readme.txt show me:
> Patch for
> - Added support for acct type Failed (15)
> - Added MySQL stored procedures support
> - Removed Cisco hack that causes errors in radius.log if acctsessiontime= 0
>
> but the patch isn't working.
>
>
>
> ------------------ 原始邮 件 ------------------
> *发件人:* "Laszlo"<laszlo at voipfreak.net
> <mailto:laszlo at voipfreak.net>>;
> *发送时间:* 2013年7月3日(星期三) 下午3:30
> *收件人:* "OpenSIPS users mailling list"<users at lists.opensips.org
> <mailto:users at lists.opensips.org>>;
> *主题:* Re: [OpenSIPS-Users] freeradiusd-2.2.0 Unsupported
> Acct-Status-Type= 15
>
> Did you compile freeradius from source? If so, you will need to
> patch it and then recompile freeradius.
> The patch can be found here:
> http://download.dns-hosting.info/CDRTool/contrib/freeradius-brandinger/
>
>
> These are quite old patches, if the most recent patch isn't
> working for you, then you will need to go through the patching
> logic manually. It will involve editing the following files:
>
> - freeradius/src/include/radius.h
> - freeradius/src/modules/rlm_sql/conf.h
> - freeradius/src/modules/rlm_sql/rlm_sql.c
> - the config file under freeradius's /etc directory
>
> Look at the lines with the "+" lines in the patch file.
>
>
> -Laszlo
>
>
>
> 2013/7/3 ㄨ冷se灬 <291490117 at qq.com <mailto:291490117 at qq.com>>
>
> dear all:
> I update my freeradius from v1.1.8 to v2.2.0.
> when I use v2.2.0 ,I can’t see unsuccessfully
> calls(like cancel,etc)
>
> and radius got this log:
> rad_recv: Accounting-Request packet from host 10.1.17.71 port
> 47962, id=165, length=510
> Acct-Status-Type = Failed
> Service-Type = IAPP-Register
> Sip-Response-Code = 487
> Sip-Method = Invite
> Event-Timestamp = "Jul 3 2013 08:55:14 CST"
> Sip-From-Tag = "202199366"
> Sip-To-Tag = "3c11a175"
> Acct-Session-Id =
> "261192415021484-264973041726312 at 10.49.2.236
> <mailto:261192415021484-264973041726312 at 10.49.2.236>"
> User-Name = "66687113 at 10.1.17.71 <mailto:66687113 at 10.1.17.71>"
> Billing-Party = "66687113 at 10.1.17.71
> <mailto:66687113 at 10.1.17.71>"
> Calling-Station-Id = "66687113 at 10.1.17.71
> <mailto:66687113 at 10.1.17.71>"
> Called-Station-Id = "sip:66687114 at c.corp.esocc.com:5060
> <http://sip:66687114@c.corp.esocc.com:5060>"
> Sip-Translated-Request-URI =
> "sip:66687114 at 221.228.228.14:58709;rinstance=e3a8a78bae83cfb9"
> Source-IP = "221.228.228.14"
> Source-Port = "32670"
> SIP-Proxy-IP = "10.1.17.71"
> Canonical-URI =
> "sip:008666687114 at 221.228.228.14:58709;rinstance=e3a8a78bae83cfb9"
> User-Agent = "Voip Phone 1.0"
> Contact = "<sip:66687113 at 221.228.228.14:32670
> <http://sip:66687113@221.228.228.14:32670>>"
> From-Header = "66687113
> <sip:66687113 at c.corp.esocc.com:5060
> <http://sip:66687113@c.corp.esocc.com:5060>>;tag=202199366"
> NAS-Port = 5060
> Acct-Delay-Time = 0
> NAS-IP-Address = 10.1.17.71
> # Executing section preacct from file
> /usr/local/freeradius/etc/raddb/radiusd.conf
> +- entering group preacct {...}
> ++[preprocess] returns ok
> # Executing section accounting from file
> /usr/local/freeradius/etc/raddb/radiusd.conf
> +- entering group accounting {...}
> [detail] expand:
> /usr/local/freeradius/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d
> ->
> /usr/local/freeradius/var/log/radius/radacct/10.1.17.71/detail-20130703
> <http://10.1.17.71/detail-20130703>
> [detail]
> /usr/local/freeradius/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d
> expands to
> /usr/local/freeradius/var/log/radius/radacct/10.1.17.71/detail-20130703
> <http://10.1.17.71/detail-20130703>
> [detail] expand: %t -> Wed Jul 3 08:55:14 2013
> ++[detail] returns ok
> [sql] Unsupported Acct-Status-Type = 15
> ++[sql] returns noop
> Sending Accounting-Response of id 165 to 10.1.17.71 port 47962
> Finished request 1.
> Cleaning up request 1 ID 165 with timestamp +9
> Going to the next request
> Waking up in 3.4 seconds.
> Cleaning up request 0 ID 164 with timestamp +7
> Ready to process requests.
>
>
> It seem Unsupported Acct-Status-Type = 15,and I check my
> dictionary
> VALUE Acct-Status-Type Failed 15 #
> RFC2866, acc
>
>
> I'm sure there's a configuration step I've missed. Could
> anyone suggest some
> other things to check?
>
>
>
>
> Thanks
> vic.xiang
>
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org <mailto:Users at lists.opensips.org>
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>
>
>
> --
>
> --
> Kind regards,
> Laszlo Bekesi
> http://voipfreak.net
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org <mailto:Users at lists.opensips.org>
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20130704/9d3e2ebd/attachment-0001.htm>
More information about the Users
mailing list